Camera Support (RED)

Take your compact camera setup to the next level by adding the Elite Accessory System for RED® KOMODO-X™. This top-tier system expands the reach of...

The Core Accessory System for RED® KOMODO-X™ is a lightweight approach to extending the camera's on-set capabilities. The system includes an ARCA B...

The Top Cheese Plate securely mounts to the KOMODO® or KOMODO-X™ using two ¼”-20 screws with anti-twist pins and adds seven ¼”-20, anti-twist mount...

Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the...

The Rear Cage - Left is one piece of the Rear Cage, singled out for purchasing if you only need mounting points on the left rear side of the camera...

Making use of the tie-in points at the top end of the camera's body, this Rear Cage - Right provides rear mounting points on the back and right sid...

Developed based on a direct request from a user, the Rigging Top Plate for RED® KOMODO-X™ expands the possibilities of adding accessories to the to...

The ARCA Base Plate was designed for dual 15mm LW rods and allows for maintaining optimal lens height for studio-style builds. This Base Plate come...

The ARCA Riser incorporates an anti-twist block design built into the bottom of the camera. The Riser was intended for use with the ARCA Baseplate,...

There are three options in Mount Support for KOMODO-X™ between RF to LPL and RF to PL that are compatible with the ARCA Riser for KOMODO-X. Mount s...

Unified VCT Wedge Plate is a Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates. The reduced-height ARRI dovetai...

Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). New design...

The Revolva Pass Through Top Plate (DSMC2™) has all same features as our Pass Through Top Plate (RED® DSMC2™) and adds a small cut out on the front...

Dovetail Clamp adapts any camera system, baseplate, or accessory to an ARRI standard dovetail. Great for use with our Fixed Bases, Quick Bases, Uni...

12" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounti...

8" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mountin...

24 inch ARRI standard dovetail with safety catches on each end.Attaches natively to:O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30Specifi...

18 inch ARRI standard dovetail with safety catches on each end.Attaches natively to:O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30Specifi...

12 inch ARRI-standard dovetail with safety catches on each end. Attaches natively to: O'Connor 2060 O'Connor 2575 O'Connor 120EX Sachtler Cine 30 ...

18" ARRI standard dovetail with stopper screw on one end and safety latch on the other to prevent accidental camera removal. Arca Swiss standard do...

Mini Touch and Go System is an industry standard, quick release system compatible with OConnor 80mm, Sachtler, and Ronford Baker. Our version is li...

Receiver Only for our Mini Touch and Go System.Mini Touch and Go System is an industry standard, quick release system compatible with OConnor 80mm,...

Quick Release Plate Only for our Mini Touch and Go System.Mini Touch and Go System is an industry standard, quick release system compatible with OC...

Mini Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass-through slots on both the horizontal and vertical plates for attachin...

Micro Touch and Go System is an industry standard, quick release system compatible with Sachtler FSB 10T, 8T, FSB 6T, and Touch and Go Plate S. Our...

Quick Release Plate Only for our Micro Touch and Go System.Micro Touch and Go System is an industry standard, quick release system compatible with ...

Receiver Only for our Micro Touch and Go System.Micro Touch and Go System is an industry standard, quick release system compatible with Sachtler FS...

Quick Release Bridgeplate (19mm) is an ARRI standard bridgeplate with 19mm rod openings. The design allows the bridgeplate to drop down and lock on...

Quick Release Bridgeplate (15mm Studio) is an ARRI standard bridgeplate with 15mm studio offset spacing (rods spaced 100mm center to center). The n...

OConnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety ...

Receiver Only for our Touch and Go system. Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtl...

Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to ...

Quick Release Plate Only for our Touch and Go system.Touch and Go System is an industry standard, quick release system compatible with OConnor 120m...

The RED® DSMC2™ Accessory Kit (Pro, 19mm) is compatible with RED® DSMC2™ Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet We...

Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to ...

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...