Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, sili...
View full details
Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for...
View full details
Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for l...
View full details
The 3/8"-16 Accessory Cube provides five sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two ...
View full details
This camera shoulder strap kit features a 1.5" wide, extra-long adjustable sling (47"-80") with double-end elastic cords and four thumb buckles for...
View full details
Meet the 15mm Maxi Rod Light, a product that resulted from a collaboration with a member of our community. This small rod light was designed specif...
View full details
Camera Strap System for Quick Detach and Release The Quick Disconnect Kits introduce a secure way to carry gear and an easy way to swap out rigs, s...
View full details
Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnet...
View full details
Customize your rig with Wooden Camera’s Accessory Plates. Securely mount items like your focus MDR, Accessory Cube, WC Battery Plates, and more to ...
View full details
Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The recei...
View full details
The 1/4”-20 Accessory Cube provides 5 sides of ¼”-20 mounting points for adding accessories to your build and comes in a 1/4"-20 or 3/8"-16 screw a...
View full details
Professional 4K signal splitter with reclocking, dual power inputs, and flexible mounting. The 4K 12G-SDI Distribution Amplifier is a high-performa...
View full details
This extra-long, adjustable camera sling, measuring 1.5" wide and extending from 47" to 80", features double-end elastic cords and four thumb buckl...
View full details
This camera shoulder pad with high-quality foam and breathable mesh reduces shoulder strain. Measuring 9.5 x 2.5 inches, it fits most 1.25-inch str...
View full details
The QD Swing Swivel has a triangle design and quick-disconnect swivel for easy, one-handed sling attachment and 360° rotation, enhancing sling cont...
View full details
Add or replace Gold Mount Studs for your setup with this 3-pack kit. The Kit includes 10mm M3 Phillips Head screws and Gold Mount Studs. By attachi...
View full details
The Bolt-On Monitor Hinge Cube was designed to securely mount monitors to the items via ¼”-20 mounting points. Using the dual Rosettes design, the ...
View full details
The NATO Rail (¼”-20) was specifically designed to be a quick solution to mount SmallHD and Teradek accessories to your setup like an Ultra 7 or Bo...
View full details
Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rai...
View full details
Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. S...
View full details
Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a h...
View full details
Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount it...
View full details
Customize your Accessory Plate setup with three movable Mini Accessory Rails. Compatible with the Bolt-On Accessory Rail clamp and Universal Access...
View full details
Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Terade...
View full details
The Accessory Plate NATO Bracket (Right Angle) allows users to attach Wooden Camera BURANO and KOMODO-X B-Boxes directly to 3rd party NATO side rai...
View full details
Save 41%
Monitor Hinge (ARCA Swiss) can attach into ARCA dovetail like the one found on a RED® KOMODO® Top mount, which is sold separately. When combined wi...
View full details
Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...
View full details
Tilting hinge for mounting on-camera monitors to Canon EOS C70. Designed with a 180-degree tilt for shifting viewing angle. The lower mount feature...
View full details
Replacement Hinge Arm that allows you to mount any of SmallHD’s Smart 5 monitors on the opposite side of the pivot that is included with the Monito...
View full details
Our line of Bolt-On Accessory Plate Adapters were designed to mount accessories that have M2.5 threaded holes to your build, like the Accessory Pla...
View full details
The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...
View full details
Save 34%
Specialized heat and shock protection for your Teradek Bolt 6 LT TX. The cage features a fiberglass-injected nylon plastic construction - ensuring...
View full details
Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...
View full details
Tilting hinge for mounting on-camera monitors to Canon EOS C70. Designed with a 180-degree tilt for shifting viewing angle. The lower thumbwheel fe...
View full details
Save 46%
Mini Monitor Hinge (Canon C300mkIII, C400, C500mkII) attaches the Canon LCD to the camera body or top handle via a captured ¼”-20 screw with a gro...
View full details
Monitor Hinge (ARCA Swiss) can attach into ARCA slot like the one found on a Top mount, which is sold separately. When combined with Top Mount, sys...
View full details
SmallHD 1/4-20 to 3/8-16 ARRI Accessory Mount Adapter attaches to SmallHD monitors, providing an offset ARRI 3/8-16 accessory mount for attaching ...
View full details
Further customize your rig with Wooden Camera’s Bolt-On Accessory Rods. Securely mount remote lens motors, rosettes, handles, and other accessories...
View full details
Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors, rosettes, handles, and oth...
View full details
Customize your rig with Wooden Camera’s Bolt-On Rod Accessory Kits, bundling the rods you need. Securely mount remote lens motors, rosettes, handle...
View full details
Compact mounting bracket designed for the Teradek Bolt 6 LT TX to integrate seamlessly onto your camera via one captive 1/4"-20 screw in up to six ...
View full details
Streamlined and versatile bracket designed for mounting the Teradek Bolt 6 LT TX in up to six different positions via a single captive 1/4"-20 scre...
View full details
Offset Mount and V-Lock Kit for Bolt 6 LT TX is a comprehensive kit that features a versatile mounting bracket for the Teradek Bolt 6 LT TX and a q...
View full details
Cold Shoe Riser Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standa...
View full details
Mini Offset Cold Shoe Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a ...
View full details
Save 49%
Wooden Camera LCD Sun Shade (4-5") attaches quickly using elastic straps to monitors 4 to 5 inches (measured diagonally) which is perfect for the R...
View full details
Save 49%
Wooden Camera LCD Sun Shade (6-7") attaches quickly using elastic straps to monitors 6 to 7 inches (measured diagonally) which is perfect for the R...
View full details
V-Lock Base Station and Wedge Kit is a quick release set based on the standard V-Lock or V-Dock as it is sometimes referred. The Base Station porti...
View full details
