Take your compact camera setup to the next level by adding the Elite Accessory System for Sony BURANO. This setup includes all the components users need to have a cinema-ready build right out of the box, including an ARCA Base Plate (Sony BURANO) and ARCA Base Plate as well as a Cage System and Ultra Handle System. The new EVF System opens up the positioning of the EVF to different locations, allowing users to find the optimal placement for their job. This top-tier system expands the reach of BURANO for use in small and large production environments. Even though this system comes with everything you need to get rolling on a big set, the design itself was made to build upon with additional accessories for greater control of your shooting environment. Add power accessory options to your build by adding the D-Box® and B-Box System to your Sony BURANO. The D-Box provides additional 2-pin 12V - 5.8A (shared over all 12V outputs), a D-Tap port and a 3-pin 24V - 3.8A (shared over all 24V outputs) power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery. Expand the power distribution of the D-Box® by adding a B-Box, which adds two 2-pin 12V, a 3-pin 24V as well as a Remote-In port to your camera setup. This allows users to add even more functionality to the BURANO by adding the ability to power additional accessories. This connection is established using the included B-Box Link Cable attached to the EXT port on both of the units to allow power to be transferred. Establish more control with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port when attached to the Remote-In port on the B-Box. Included Items: Base Plate System for Sony BURANO Top Plate System for Sony BURANO Side Hook and Loop Plate (Sony BURANO) Side Rail Set for Sony BURANO Ultra Handle System (⅜”-16 Universal) EVF System Rosette Standoff Universal 15mm EVF Rail Extension Bolt-On Accessory Plate for Sony BURANO Specifications: Weight: 2835 g (6.25 lbs) Dimensions: 162 x 185 x 100 mm (6.4 x 7.3 x 3.9 in) Bundle Offers: Elite Accessory System for Sony BURANO + Cine 7 B-Stock Monitor + Sony Camera Control D-Box™ and B-Box System for Sony BURANO and a 6in Maxi Rod Light D-Box™ and B-Box System for Sony BURANO + Accessory Plate System

The Core Accessory System for Sony BURANO is a lightweight approach to extending the camera's on-set capabilities. The system includes an ARCA Base Plate and ARCA Riser as well as a Top Plate and Ultra Handle 5” Kit. The intention behind this system is to keep the camera build compact, but effective– so we’ve added an abundance of mounting points allowing users to add accessories. The Core Accessory System provides the fundamental building blocks users need to maximize the functionality of the camera on-set. Add power accessory options to your build by adding the D-Box® and B-Box System to your Sony BURANO. The D-Box provides additional 2-pin 12V - 5.8A (shared over all 12V outputs), a D-Tap port and a 3-pin 24V - 3.8A (shared over all 24V outputs) power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery. Expand the power distribution of the D-Box® by adding a B-Box, which adds two 2-pin 12V, a 3-pin 24V as well as a Remote-In port to your camera setup. This allows users to add even more functionality to the BURANO by adding the ability to power additional accessories. This connection is established using the included B-Box Link Cable attached to the EXT port on both of the units to allow power to be transferred. Establish more control with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port when attached to the Remote-In port on the B-Box. Included Items: Base Plate System for Sony BURANO Top Plate (Sony BURANO) Ultra Handle 5" (3/8"-16, Universal) Specifications: Weight: 1547 g (3.4 lbs) Dimensions: 162 x 130 x 75 mm (6.4 x 5.1 x 3 in)

Add power accessory options to your build by adding the D-Box® and B-Box System to your Sony BURANO. The D-Box provides additional 2-pin 12V - 5.8A (shared over all 12V outputs), a D-Tap port and a 3-pin 24V - 3.8A (shared over all 24V outputs) power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery. Expand the power distribution of the D-Box® by adding a B-Box*, which adds two 2-pin 12V, a 3-pin 24V as well as a Remote-In port to your camera setup. This allows users to add even more functionality to the BURANO by adding the ability to power additional accessories. This connection is established using the included B-Box Link Cable attached to the EXT port on both of the units to allow power to be transferred. Establish more control with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port when attached to the Remote-In port on the B-Box. The B-Box Bolt-On Side Mount was designed to be used with the B-Box for Sony BURANO. It mounts using M2.5 threads along the B-Box and provides a 1/4”-20 mounting point with anti twist pins. D-Box unit is available in either a Gold Mount or V-Mount option. Included Items: D-Box® (Sony BURANO) B-Box System (Sony BURANO) *B-Box Requires D-Box® (Sony BURANO) connection via B-Box Link Cable (Sony Venice, Venice 2, BURANO) for power distribution Specifications: D-Box® (V Mount) and B-Box System (Sony BURANO): Weight: 451.3 g (0.99 lbs) | Dimensions: 134 x 62 x 135 mm (5.3 x 2.4 x 5.3 in) D-Box® (Gold Mount) and B-Box System (Sony BURANO): Weight: 445.9 g (0.98 lbs) | Dimensions: 138 x 62 x 136 mm (5.4 x 2.4 x 5.3)

Base Plate System for Sony BURANO includes the ARCA Base Plate (Sony BURANO) and ARCA Base Plate– low-profile and compatible with any make of bridge plates that uses ARRI Standard height, this Base Plate design keeps the center of gravity low and as spread out as possible. This allows users to easily add shoulder pads or other accessories while maintaining optimal stability. Two rod clamps, one on either side of the base plate, provide powerful friction to prevent torque and rotation from your lens motors. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security and comes with ⅜”-16 mounting points to attach the Bridge Plate. Included Items: ARCA Base Plate ARCA Base Plate (Sony BURANO) Specifications: Weight: 635 g (1.4 lbs) Dimensions: 125 x 130 x 36 mm (4.9 x 5.1 x 1.4 in)

Add power accessory options on the Sony BURANO by adding the D-Box®* to your camera system, the D-Box provides additional 2-pin 12V - 5.8A (shared over all 12V outputs), a D-tap port and a 3-pin 24V - 3.8A (shared over all 24V outputs). The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. Choose from either a Gold Mount or V-Mount option. *D-Box® (Sony BURANO) requires B-Box connected via B-Box Link Cable (Sony Venice, Venice 2, BURANO) and Remote Cable (Sony BURANO) connected to camera for trigger through 24V port on D-Box Specifications: D-Box® - V Mount (Sony BURANO): Weight: 400.5 g (0.88 lbs) | Dimensions: 96 x 47 x 135 mm (3.8 x 1.9 x 5.3 in) D-Box® - Gold Mount (Sony BURANO): Weight: 394.6 g (0.87 lbs) | Dimensions: 100 x 38 x 136 mm (3.9 x 1.5 x 5.3 in)

The B-Box System for Sony BURANO* expands the power distribution of the D-Box® by adding two 2-pin 12V - 5.8A (shared over all 12V outputs), a 3-pin 24V - 3.8A (shared over all 24V outputs) and a Remote-In port to your camera setup. This System allows users to power additional accessories and includes a mount to attach this system to the Top Plate for Sony BURANO . The B-Box Bolt-On Side Mount was designed to be used with the B-Box for Sony BURANO. It mounts using M2.5 threads along the B-Box and provides a 1/4”-20 mounting point with anti twist pins. This System is connected to the D-Box using the included B-Box Link Cable, it is attached to the EXT port on both units to allow power transfer. Users can take it a step further with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port. Included Items: B-Box (Sony BURANO) B-Box Bolt-On Side Mount (Sony BURANO) B-Box Link Cable (Sony Venice, Venice 2, BURANO) Remote Cable (Sony BURANO) *Requires D-Box® (Sony BURANO) connection via B-Box Link Cable (Sony Venice, Venice 2, BURANO) Specifications: Weight: 51.26 g (0.11 lbs) Dimensions: 46 x 24 x 73 mm (1.8 x 0.9 x 2.9 in)

The B-Box Bolt-On Side Mount was designed to be used with the B-Box for Sony BURANO. It mounts using the M2.5 screws along the top of the B-Box, providing a 1/4”-20 mounting point with anti twist pins to the Top Plate for Sony BURANO . The design of the B-Box Bolt-On Mount allows for the B-Box to be positioned at an angle to match the ports along the rear of the cameras body. Included Items: 2mm Hex Key 3/16” Hex Key Specifications: Dimensions: 2 x 1.2 x 3.5 in (51 x 30 x 89 mm) Weight: 72.1g (0.16 lbs)

The Top Plate System for Sony BURANO includes the Top Plate, Front Dual Rod Clamp and Top Plate 15mm Upper Rod Clamp. This system securely mounts to the top of the camera using four ¼”-20 screws and adds multiple ¼”-20 and ⅜”-16 mounting points. The Top plate also takes into account spacing for the EVF connector on the Assistants side. With the front facing ⅜”-16 mounting points, users can add the included Front Dual Rod Clamp to secure rods with a Top Plate 15mm Upper Rod Clamp. Additionally, with the ⅜”-16 mounting point, users can add the EVF System directly to the Top Plate. The 2 plate design of this Top Plate ensures that it can be used in tandem with the SONY PWX-FX9 Top Handle by removing the inner insert and securing the handle directly to the camera. The Top Plate also has mounting locations for the stock BURANO carry handle. Included Items: Top Plate (Sony BURANO) Front Dual Rod Clamp (Sony BURANO) Top Plate 15mm Upper Rod Clamp Specifications: Weight: 703.1 g (1.55 lbs) Dimensions: 162 x 152 x 74 mm (6.4 x 6 x 2.9 in)

Utilizing a newly designed Universal 15mm Rod Clamp, the EVF System introduces a modular way of mounting the EVF. Attach the Sony BURANO EVF to the bracket via a ¼”-20 screw, allowing the 2.5mm threads across the back and sides to be used for accessories like our Accessory Rails . The Universal EVF Accessory Rail Swivel Clamp is fully rotatable and allows the user to determine the optimal location. Push button safeties help keep the EVF secure to the system while offering a quick release function, in case removal is necessary. An additional mounting option is included for users to mount the EVF system using the Accessory Rails to an Accessory Bolt-On Clamp for placement anywhere around the camera for when traditional EVF use is not needed. Included Items: Universal 15mm Rod Clamp EVF Plate for Sony BURANO Universal EVF Swivel Arm Universal EVF Accessory Rail Swivel Clamp Accessory Rail Bolt-On Clamp Specifications: Weight: 308.90 g (0.7 lbs) Dimensions: 125 x 170 x 82 mm (4.9 x 6.7 x 3.2 in)

The Side Rail Set gives users mounting points on the sides of the Sony BURANO as well as Sensor Plane markings. These rails offer four ⅜”-16 and three ¼”-20, anti-twist mounting points on the side as well as a front facing ⅜”-16 mounting point where you can add accessories like Bolt-On Rods for lens motors or any of our universal accessories. These items attach to the Top Plate and ARCA Base Plate (Sony BURANO) via ¼”-20 screws. Included Items: Left Side Rail (Sony BURANO) Right Side Rail (Sony BURANO) Specifications: Weight: 168.74 g (0.37 lbs) Dimensions: 100 x 22 x 168 mm (3.9 x 0.9 x 6.6 in)

The ARCA Base Plate was designed for dual 15mm LW rods and maintains optimal lens height for studio-style builds. This Base Plate includes two ⅜”-16 screws and two anti-twist pins built into the bottom of the plate for a secure connection. Additionally, six ⅜”-16 and four ¼”-20 with anti-twist ports on the sides and front of the plate allow users to mount more accessories along the Base Plate. Our ARCA system allows quick adjustments from a studio build to a Steadicam or Handheld build in seconds. Included Items: 3/16” Hex Key Specifications: Weight: 410.95 g (0.9 lbs) Dimensions: 125 x 130 x 26 mm (4.9 x 5.1 x 1 in)

The Top Plate securely mounts to the Sony BURANO using four ¼”-20 screws and adds multiple ¼”-20 and ⅜”-16 mounting points along the top and sides of the BURANO. The Top plate also takes into account spacing for the EVF connector on the Assistants side. This 2 plate design of this Top Plate ensures that it can be used in tandem with the SONY PWX-FX9 Top Handle by removing the inner insert and securing the handle directly to the camera. The Top Plate also has mounting locations for the stock BURANO carry handle. The Top Plate for Sony BURANO is compatible with the Front Dual Rod Clamp (Sony BURANO) and EVF System (Sony BURANO) . Included Items: 3/16” Hex Key 3mm Hex Key Specifications: Weight: 535.24 g (1.18 lbs) Dimensions: 162 x 120 x 19 mm (6.4 x 4.7 0.75 in)

The Side Rail - Left gives users mounting points on the left side of the KOMODO® or KOMODO-X™ as well as Sensor Plane markings. This rail offers four ⅜”-16 and two ¼”-20, anti-twist mounting points where you can add accessories like Bolt-On Rods for lens motors or any of our universal accessories. Can work as a standalone item or in tandem with the Rear Cage and Side Rail - Right. This system together was designed to provide all-around rigging for the KOMODO-X. The side rails are designed to be compatible with the Adapter Support Brackets for RED’s KOMODO RF to PL lens mount with their forward facing M4 holes. For KOMODO: Left side Rail does cover up the audio ports Microphone and Headphones. These item attach to the Top Plate and ARCA Base Plate (Sony BURANO) via ¼”-20 screws. Included Items: 3/16” Hex Key Specifications: Weight: 84.37 g (0.19 lbs) Dimensions: 49 x 22 x 168 mm (1.9 x 0.9 x 6.6 in)

The Right Side Rail gives users mounting points on the right side of the Sony BURANO as well as Sensor Plane markings. This rail offers four ⅜”-16 and three ¼”-20, anti-twist mounting points on the side as well as a front facing ⅜”-16 mounting point where you can add accessories like Bolt-On Rods for lens motors or any of our universal accessories. These items attach to the Top Plate and ARCA Base Plate (Sony BURANO) via ¼”-20 screws. Included Items: 3/16” Hex Key Specifications: Weight: 84.37 g (0.19 lbs) Dimensions: 49 x 22 x 168 mm (1.9 x 0.9 x 6.6 in)

The Side Hook and Loop Plate for Sony BURANO provides soft side Hook and Loop real estate for items like timecode boxes, PL Caps and more. This plate attaches via two 3mm screws to the built-in mounting point near the video connector ports on the Sony BURANO. For ease of use, the left side of the plate labels the different ports located behind the plate. Included Items: 3mm Hex Key Specifications: Weight: 15.6 g (0.03 lbs) Dimensions: 50 x 9 x 62 mm (2 x 0.35 x 2.4 in)

Designed to be used with the Top Plate (Sony BURANO) , the Front Dual Rod Clamp offers users placement options for two 15mm rod for additional accessory mounting like EVF’s or lens motors. Additional mounting points like the middle ⅜”-16 provides users with a mounting position for the EVF System (Sony BURANO) while the left and right ⅜”-16 mounting positions can offer users the option to mount Bolt-On Rods. Included Items: 3/16” Hex Key Specifications: Weight: 105.69 g 0.23 lbs) Dimensions: 119 x 32 x 55 mm (4.7 x 1.25 x 2.2 in)

The Bolt-On Accessory Plate for Sony BURANO adds multiple ¼”-20 and ⅜”-16 mounting points for items like MDR Boxes and Wireless Video units. This plate attaches to the camera with a 3mm screw that goes into the built-in mounting point near the video connector ports and attaches to the Top Plate (Sony BURANO) via a ¼”-20 screw. Included Items: 3mm Hex Key 3/16” Hex Key Specifications: Weight: 72.12 g (0.16 lbs) Dimensions: 51 x 30 x 89 mm (2 x 1.2 x 3.5 in)

Open up the mounting options for the Sony BURANO’s EVF by adding the EVF Plate to your build. Designed for the inevitable repositioning of the EVF from its original location, add a Bolt-On Accessory Rail Clamp anywhere on the Top Plate, Ultra Handle System or Side Rails. This plate utilizes multiple Accessory Rails as mounting options, and allows you to adjust the EVF position to suit the needs of the job. Included Items: 3 x 60mm Accessory Rails 3/16” Hex Key Specifications: Weight: 124.74 g (0.28 lbs) Dimensions: 133 x 16 x 81 mm (5.25 x 0.6 x 3.2 in)

This 4" cable establishes a connection from the camera’s Remote port via a 2.5mm TRS Connector to the B-Box for Sony BURANO . When enabled, a remote Run/Stop ability for connected accessories via the 3-pin connector port on the B-Box for Sony BURANO is allowed. In addition, when the B-Box for BURANO is connected to the D-Box for BURANO via the B-Box Link Cable, Run/ Stop ability is enabled to the 3-pin connector on the D-Box. Specifications: Dimensions: 5.9 x 0.9 x 0.3 in (150 x 22.5 x 7.9 mm) Weight: 3.67g (0.01 lbs)

The Ultra Handle 5" NATO Kit features a lightweight, durable, non-slip handle with Bocote hardwood inserts for comfort, and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. This Kit adds an array of ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots. The Ultra Handle 5" NATO Kit includes a 5” extension, as well as a 1” Extension, and a Hex Wrench. This Kit also includes a NATO Upright with 6x ⅜”-16 tapped holes with anti-twist pin slots, and 2x ¼”-20 tapped holes. This Universal Upright integrates seamlessly with other Ultra Handle extensions and is compatible with all NATO accessories. Included Items: Ultra Handle Extension Module 1” Ultra Handle NATO Upright Ultra Handle Extension Module 5” 3/16” Hex T Handle Specifications: Weight: 425.02 g (0.94 lbs) Dimensions: 6.96 x 3.1 x 1.3 in (177 x 78 x 32 mm) Overview Video: