Coiled HD-SDI - BNC to BNC cable. Extends from 10" resting length to 20" to allow mobility and adjusting of on board monitors, wireless systems, and recorders. Ideal for Teradek wireless systems and Steadicam configurations. Excellent for studio configurations as well as patching. Also available in 20" length . RoHS Compliant. 3G-SDI Rated. Specifications: Weight: 88g (0.2 lbs) Dimensions: 245.0 x 31 x 16.5 mm (10 x 1.2 x 0.6 in) Resting length: 10 inches Fully stretched length: 20 inches

Coiled HD-SDI - BNC to BNC cable. Extends from 20" resting lenth to 36" to allow mobility and adjusting of on board monitors, wireless systems, and recorders. Ideal for Teradek wireless systems and Steadicam configurations. Excellent for studio configurations as well as patching. Also available in 10" length. RoHS Compliant. 3G-SDI Rated. Specifications: Weight: 88g (0.2 lbs) Dimensions: 245.0 x 31 x 16.5 mm (10 x 1.2 x 0.6 in) Resting length: 20 inches Fully stretched length: 36 inches

Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridgeplate to be converted from RED® standard height to ARRI standard height making it compatible with any type of camera rig. Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. Combine with Unified Baseplates for correct rod height on cameras like Combine with Unified Baseplates for correct rod height on cameras. Includes: (2) 3/8-16 screws (2) 1/4-20 screws Specifications: Weight: 453.592 g (1 lb) Dimensions: 50.8 x 127 x 177.8 mm ( 2 x 5 x 7 in) Unified Baseplate Overview: Rod Standards Tutorial:

Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). New design allows the Bridgeplate to be converted from RED® standard height to ARRI standard height making it compatible with any type of camera rig. Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. Combine with Unified Baseplates for correct rod height on cameras. Includes: (2) 3/8-16 screws (2) 1/4-20 screws Specifications: Weight: 453.592 g (1 lb) Dimensions: 50.8 x 127 x 177.8 mm ( 2 x 5 x 7 in) Unified Baseplate Overview: Rod Standards Tutorial:

Ultra Arm Ball (NATO Clamp) is a component of our Ultra Arm lineup which clamps to any quick release, NATO standard accessory rail and has a 25mm (1 inch) ball on the end. Compatible with products like Safety NATO (70mm) , NATO Lock (Rail Only) , Safety NATO Arm (Weapon) , Unified Cage (Alexa Mini) , etc. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 25.4 x 63.5x 25.4 mm ( 1 x 2.5 x 1 in)

Ultra Arm Ball (Cold Shoe) is a component of our Ultra Arm lineup which attaches to any camera hot shoe or accessory hot shoe mount and has a 25mm (1 inch) ball on the end. Ideal for use with DSLRs, Canon C-series cameras, Sony FS7/FS5, and many more. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 25.4 x 50.8 x 25.4 mm ( 1 x 2 x 1 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simply unlock the clamps and slide to the appropriate rod position. Notches in the bottom of the bridge indicate when the clamp is in the correct position. The included swing arm and lens gears can be flipped to the front or back position which is helpful for compact lens configuration and the bridge has the lowest height in the industry so it will work with larger zoom lens barrels. The hand wheel is compatible with the standard marking disc and hard stop disc which provides positionable limits when using DSLR lenses with infinite barrel rotation. In total, 2 marking discs and 1 hard stop disc are included. The hand wheel is removable and has a standard accessory port for use with the focus whip and crank (not included). Included in the kit are 5 gear attachments: .5 mod for Canon ENG .6 mod for Fujinon ENG .8 mod small diameter for Cinema Lenses .8 mod large diameter for Cinema Lenses Friction Gear for DSLR lenses Each kit ships in custom cut foam which fits natively into a Pelican 1500 case (not included). Included Items: 1x Adjustable Bridge with Rod Clamps 1x Hand Wheel 1x Hard Stop Disc 2x Standard Marking Discs 5x Focus Gears ( .5 mod, . 6 mod, .8 mod small, .8 mod large, Friction Gear) 1x Custom Cut Foam for a Pelican 1500 Case (not included) Also available - UFF-1 Universal Follow Focus (Pro) with complete set of includes. UFF-1 Universal Follow Focus Demo:

The V-Lock Base Station and Wedge Kit (ARRI Accessory Mount 3/8-16) is a quick release set based on the standard V-Lock or V-Dock as it is sometimes referred. The Base Station portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting and the Base Station has the hole pattern for the ARRI accessory mount pins. The V-Lock Accessory Wedge (ARRI Accessory Mount 3/8-16) is the dovetail portion of the kit and can bolt into any ARRI standard accessory mount or 3/8-16 hole. Please note that if your accessory has M3 attachment points like our Preston MDR4 Mounting Plate and Smartphone Clamp , choose the original V-Lock Base Station and Wedge Kit instead. *Not compatible with V-Mount battery accessories Specifications: Weight: 64 g (0.14 lbs) Dimensions: 50.8 x 76.2 x 25.4 mm ( 2 x 3 x 1 in)

Quick Release Bridgeplate (19mm) is an ARRI standard bridgeplate with 19mm rod openings. The new design allows the bridgeplate to drop down and lock on, anywhere along an ARRI standard dovetail. A safety catch adds security to the lever release function. Unlock the lever half way to slide on the dovetail or push the release button to allow the lever to move further and release the camera vertically. ARRI standard height makes it compatible with most camera rigs including those using our Unified Baseplates . Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. When combining this Bridgeplate with a RED® DSMC2™ or earlier RED® systems, the lens height will be approximately +3mm too tall. If you need to achieve the correct RED® lens height spacing, please choose our Unified Bridgeplate (19mm) . QR Includes: (2) 3/8-16 screws Specifications: Weight: 420g (0.93 lbs) Dimensions: 101.6 x 152.4 x 31.75 mm (4 x 6 x 1.25 in)

Quick Release Bridgeplate (15mm Studio) is an ARRI standard bridgeplate with 15mm studio offset spacing (rods spaced 100mm center to center). The new design allows the bridgeplate to drop down and lock on, anywhere along an ARRI standard dovetail. A safety catch adds security to the lever release function. Unlock the lever half way to slide on the dovetail or push the release button to allow the lever to move further and release the camera vertically. ARRI standard height makes it compatible with most camera rigs including those using our Unified Baseplates . Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. When combining this Bridgeplate with a RED® DSMC2™ or earlier RED® systems, the lens height will be approximately +3mm too tall. If you need to achieve the correct RED® lens height spacing, please choose our Unified Bridgeplate (15mm Studio) . QR Includes: (2) 3/8-16 screws Specifications: Weight: 420g (0.93 lbs) Dimensions: 101.6 x 152.4 x 31.75 mm (4 x 6 x 1.25 in)

Oconnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety latches allow for smoother camera installation. Provides 1/4-20 and 3/8-16 mounting points as well as mounting points for rack gear to be used on OConnor 120ex heads for driving heavy feature film payloads back and forth for accurate balancing. Also attaches to any tripod head via screws. Attaches natively to: OConnor 2560 OConnot 2575 OConnor 2060 OConnor 2065 OConnor 120EX Specifications: Weight: 758g (1.68 lbs) Dimensions: 365.76 x 95.25 x 25.4 mm (14.4 x 3.75 x 1 in)

Mini Offset Cold Shoe Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount offset 26.3mm horizontally from the center of the 3/8"-16 screw. The adjustable set pin can be moved to either side of the cold shoe for both left and right engagement. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 22.6g (.05 lbs) Dimensions: 50 x 26 x 8 mm (2 x 1.02 x .3 in)

Cold Shoe Riser Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount raised 23mm vertically from the center of the 3/8"-16 screw. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 29.5g (.07 lbs) Dimensions: 28 x 25 x 27 mm (1.1 x 1 x 1.06 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes: Rosette Bracket 2x Rosette Handle (Brown Leather) 2x Rosette Arm Specifications: Weight: 1081g (2.4 lbs) Dimensions: 152.40 x 101.60 x 279.40 mm (6.0 x 4.0 x 11.0 in)

Universal Lens Support (15mm LW) supports heavy lenses when using 15mm lightweight rods. Includes 1/4-20 cap for attaching to tripod collars and some cinema lenses, 3/8-16 for attaching to most cinema lenses with standard support foot, and rolling Y bracket for attaching to DSLR type lenses where no support foot is available. Rubber wheels also allow for positioning under rotating focus barrels when necessary. Quick, snap on installation possible by loosening thumbscrews. Vertical post can move laterally to accommodate skewed baseplates. Height adjustment meets any diameter lens barrel. Specifications: Weight: 156g (0.3 lbs) Dimensions: 102.7 x 38.9 x 66.1 mm (4.0 x 1.5 x 2.6 in) Demonstration Video: NAB Coverage: Rod Standards Tutorial:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to 1/3 lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Touch and Go System is compatible with: -120mm O'Connor Euro -Sachtler 35 -Ronford Baker RBQ Specifications Complete System: Weight: 510g (1.12 lbs) Dimensions: 184.2 x 91.44 x 25.4 mm (7.25 x 3.6 x 1 in) Touch and Go Plate Only: Weight: 118g (0.26 lbs) Dimensions: 114.3 x 77.47 x 6.6 mm (4.5 x 3.05 x .26 in) Touch and Go Receiver Only: Weight: 390g (0.85 lbs) Dimensions: 184.2 x 91.44 x 19.05 mm (7.25 x 3.6 x .75 in) Touch and Go System Overview: NAB 2018 New Products Overview:

The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 inches or 42.5mm apart center to center. The NATO ARRI Rail is a new version of our popular Safety NATO Rail which has a safety pin on one end and an ARRI accessory mount on the other which is great for adding our Microphone Shock Mount , Universal Offset Bracket , or other ARRI accessory devices. Great for attaching our new NATO Handle Plus v2 , RED®, and third-party NATO accessories. Includes: (2) 1/4-20 x 3/8" screws Specifications: Weight: 36g (0.08 lbs) Dimensions: 82.6 x 20.5 x 16.4 mm (3.25 x 0.8 x 0.6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Wooden Camera Multi-Tool features an all metal construction and folds up into a compact form that easily fits into a pocket or toolbox. The Multi-Tool contains a flat head screwdriver, #1 phillips head screwdriver, 3/16" hex, 2.5mm hex, 3mm hex, 4mm hex, T10 star key, and T20 star key. Specifications: Weight: 118g (0.26 lbs) Dimensions: 92.3 x 20.3 x 35.6 mm (3.75 x 0.8 x 1.4 in)

Zip Box Pro 4x5.65 (Complete Kit) is a lightweight and compact, clamp-on mattebox for various diameter lenses which can hold three 4x5.65 filters that are loaded from the front and held by a spring loaded latch. The included top flag is made of lightweight carbon fiber and covers the front of the mattebox which is great for protecting the lens between takes. The flag can be removed by loosening the top thumbscrew, aligning the tab with the key slot, and pulling out. Rear opening can be swapped by loosening the 4 thumbscrews and replacing with included clamp on backs featuring diameters of 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm. If swing away version is desired, the clamp on back can be replaced with the Zip Box Pro 4x5.65 (Swing Away Back Only). Includes: - Mattebox with 3x 4x5.65 filter stages - Clamp On 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, 80mm Backs - Top flag Specifications: Weight: 807.4g (1.78 lbs) Dimensions: 228.6 x 76.2 x 203.2 mm (9 x 3 x 8 in)

Vertical Camera Bracket has 1/4-20 and 3/8-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to tripod plates, camera bodies, ARRI dovetails, and more. Made of durable, CNC machined aluminum, the bracket can accommodate even the heaviest camera packages. Includes: (2) 3/8-16 Unified Bridgeplate Screw (2) 1/4-20 Unified Bridgeplate Screw Specifications: Weight: 1960g (4.11 lbs) Dimensions: 247.7 x 247.8 x 247.7 mm (9.75 x 6 x 9.75 in)

A major update to our popular Shoulder Rig at a lower cost! Now including telescoping arms, additional arm rotation points to widen or narrow grip spacing, a larger and more durable shoulder pad, lighter weight design, and an integrated kickstand for setting the rig down. Quick release shoulder rig based on ARRI standard dovetail and rosettes. Allows for Crossbar to be adjusted left and right on the NATO standard rail by unlocking center thumbscrew and sliding. Threaded holes on Crossbar for attaching monitors, rod clamps, cheese plates, battery mounts, and more. Works great with our NATO Lock Ultra Arm Monitor Mount for quickly moving a monitor from camera to shoulder mounted position. Two shoulder pad options are included to accommodate different shoulder sizes. Available in black rubber or brown leather. Also Available: Shoulder Rig v3 (Base) Specifications: Weight: 1535g (3.4 lbs) Dimensions: 419 x 165 x 108 mm (16.5 x 6.5 x 4.25 in)

Zip Box Pro 4x5.65 (Clamp On) is a lightweight and compact, clamp-on mattebox for up to 114mm diameter lenses which can hold three 4x5.65 filters that are loaded from the front and held by a spring loaded latch. The included top flag is made of lightweight carbon fiber and covers the front of the mattebox which is great for protecting the lens between takes. The flag can be removed by loosening the top thumbscrew, aligning the tab with the key slot, and pulling out. Rear opening of this back can be swapped by loosening the 4 thumbscrews and replacing with clamp on backs featuring diameters of 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm. If swing away version is desired, the clamp on back can be replaced with the Zip Box Pro 4x5.65 (Swing Away Back Only) . Available in the Following Diameters: 80mm, 85mm, 87mm, 95mm, 100mm, 104mm,110mm, 114mm Includes: - Mattebox with 3x 4x5.65 filter stages - Clamp On Back - Top flag Specifications: Weight: 225g (0.54 lbs) Dimensions: 196.8 x 50.8 x 165 mm (7.75 x 2 x 6.5 in)

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors , rosettes , handles , and other accessories to your camera rig using the rods’ locating pins that promise stability; never twisting, turning, or coming loose. In addition to bringing security and customization to your rig, our Dual Mount Bolt-On Rods are also sleek and unobtrusive, featuring a matte black finish. The Dual Mount Bolt On Rod can be mounted from one of two axes allowing the rods to extend from either the face or side of a rig - always keeping the rod parallel with the lens mount. Specifications: Dual Mount Bolt On Rod 15mm x 1.5” (3/8-16): 18 g (.04 lbs) | 64 x 20 x 20 mm (2.52 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 3” (3/8-16): 27.2 g (.06 lbs) | 102 x 20 x 20 mm (4.02 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 5” (3/8-16): 36.3 g (.08 lbs) | 153 x 20 x 20 mm (6.03 x .79 x .79 in)

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for shifting viewing angle. Upper attachment features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. Included 15mm mounting spud allows for upper attachment to be quick released and mounted onto any 15mm rod clamp. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors . Includes: 15mm Mounting Spud Specifications: Weight: 58g (0.1lbs) Dimensions: 27 x 39 x 51 mm (1 x 1 x 0.2 in)

A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance. Specifications: Weight: 325 g (0.7 lbs) Dimensions: 180 x 109 x 21 mm (7.09 x 4.29 x 0.83 in)

Customize your Accessory Plate setup by adding a lightweight dual 15mm rod attachment for bolt-on accessories. Compatible with the Bolt-On Accessory Rail Clamp or the Universal Accessory Hinge and Clamp . This rod mount offers the option of securing plates firmly on your camera via dual 15mm lightweight rods in a vertical or horizontal position, whichever works best for your build to keep it neat and organized. In addition to providing the maximum customization to your rig, our Universal Dual Rod Clamp For Bolt-On Accessories provide a sleek and unobtrusive design featuring a black anodized aluminum finish. Read the Accessory Plate blog to learn how each part of the system works together. Specifications: Weight: 65.5 g ( 0.14 lbs) Dimensions: 24 x 113 x 27 mm (0.94 x 4.44 x 1.1 in)

Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In)

Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Timecode Box, and Wireless Video TX to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Hook and Loop Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each System contains four Hook and Loop plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount items like your focus MDR or Timecode Box to any camera rig using the variable options in this kit including two plates consisting of ⅜-16 screw mounts with locating pins, and a ¼-20 version. In addition to providing the maximum customization to your rig, our Hook and Loop Plate Kit provides a sleek and unobtrusive design featuring a matte black finish. Each Kit contains 3 Hook and Loop plates in the following increments: 4”x1.5” and 2 versions of 2”x2” plates. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Mini Hook and Loop Plate (3/8"-16) Bolt-On Small Hook and Loop Plate (3/8"-16) Bolt-On Mini Hook and Loop Plate (1/4"-20)

Add a new way to stash your timecode sync box or camera port caps in a secure and organized way to your camera builds. This plate includes soft side hook and loop directly incorporated on the plate in addition to a ⅜”-16 or ¼”-20 screws and locating pins to prevent any movement of the plate. The Bolt-On Hook-and-Loop Plate also offers a secure attachment anywhere on your camera build or mounting point. In addition to providing the maximum customization to your rig, our Bolt-On Hook and Loop Plate provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Available sizes for the ⅜”-16 come in mini and small. Available size for the ¼”-20 is a mini plate. Read the Accessory Plate blog to learn how each part of the system works together. Specifications: Bolt-On MIni Hook and Loop Plate (3/8"-16): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm (2.2 x 1.6 x 0.56 in) Bolt-On Small Hook and Loop Plate (3/8"-16): 41.4 g (0.09 lbs) | 105 x 40 x 14 mm (4.1 x 1.6 x 0.56 in) Bolt-On MIni Hook and Loop Plate (1/4"-20): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twisting and were designed with tool passthrough for secure mounting. The Bolt-On Rosettes come in either ⅜”-16 and ¼”-20 options. Included Items: 4mm Hex Key Specifications: 25mm Bolt-On Rosette (1/4"-20) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm (1 x 1 x 0.6 in) 25mm Bolt-On Rosette (3/8"-16) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm ( 1 x 1 x 0.6 in)

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position. Specifications: 214 g (0.5 lbs) | 180 x 110.5 x 16 mm (7.1 x 4.4 x 0.6 in)

The Universal 15mm Rod Clamp is a single rod clamp that attaches a 15mm rod to any 3/8"-16 mounting point and includes four anti-twist pins for maximum security. The design of this clamp includes extended sides, meaning less flex on higher loaded items like EVF’s. Included Items: 3/16” Hex Key Specifications: Weight: 34.34 g (0.08 lbs) Dimensions: 29 x 33 x 45 mm (1.1 x 1.3 x 1.75 in)

When using a 15mm rod, like the SONY PWX-FX9 Top Handle rod, this extension allows you to maneuver the EVF system along the built-in extensions rail. Complete with a safety pin to prevent EVF slippage, this extension can be used on multiple camera systems. Specifications: Weight: 29.26 g (0.06 lbs) Dimensions: 131 x 34 x 11 mm (5.2 x 0.9 x 0.4 in)

The Universal EVF Swivel Arm is a fresh approach to the EVF system . The swivel arm uses a 15mm rod mount and includes a built-in rail, allowing for the Universal EVF Accessory Rail Swivel Clamp to easily attach and slide into the correct user position. The swivel arm also includes a safety cap to prevent the rod from coming out of the clamp, when extending the rod to its preferred positioning. Specifications: Weight: 40.51 g (0.09 lbs) Dimensions: 93 x 88 x 20 mm (3.7 x 3.5 x 0.8 in)

The Universal EVF Accessory Rail Swivel Clamp was designed to open up the mounting options for the EVF on Sony BURANO. This clamp utilizes rail extensions for mounting the EVF in the best optical position. Users can also mount additional accessories via a mini rail clamp using Accessory Rails. Specifications: Weight: 109.32 g (0.24 lbs) Dimensions: 85 x 57 x 41 mm (3.5 x 2.25 x 1.6 in)

The D-Box link cables are designed to establish a connection between Wooden Camera D-Boxes like the D-Box® for Sony BURANO and D-Box to Venice 2 to break out boxes or p ower strips , so that communication and power can be transferred between the systems. These cables utilize an EXT port and are right-angle on one side and straight on the other. There are varying lengths of this cable ranging from 2in, 3.5in and 5.5in allowing the user to adjust the positioning of items like the B-Box (Sony BURANO) . Specifications 2 in: Weight: 3.57g (0.01 lbs) | Dimensions: 4.3 x 1.2 x 0.35 in (109.3 x 30 x 8.8 mm) 3.5 in: Weight: 3.67g (0.01 lbs) | Dimensions: 5.6 x 1.2 x 0.4 in (143 x 30 x 11 mm) 5.5 in: Weight: 4.99g (0.01 lbs) | Dimensions: 7.8 x 1.2 x 0.35 in (199 x 30 x 8.8 mm)

The Universal 15mm Rod Clamp is a single rod clamp that attaches a 15mm rod to any 1/4"-20 or 3/8"-16 mounting point. Three options in removable bases offer various mounting options with detachable locating pins. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both SmallHD (CS) and ARRI-standard mounting points. Clamps ratcheting thumb screws make tie-down adjustments easy to maneuver. The Universal 15mm Rod Clamp is compatible with Wooden Camera Bolt-On Accessory Rods and Kits for quick and easy accessory attachment. Specifications: Weight: 44.5g (0.09 lbs) Dimensions: 27 x 10.5 x 70 mm (1.1 x 0.4 x 2.75 in)

The Universal 19mm Rod Clamp is a single rod clamp that attaches a 19mm rod to any 1/4"-20 or 3/8"-16 mounting point. Three options in removable bases offer various mounting options with detachable locating pins. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both SmallHD (CS) and ARRI-standard mounting points. Clamps ratcheting thumb screws make tie-down adjustments easy to maneuver. The Universal 19mm Rod Clamp is compatible with Wooden Camera Bolt-On Accessory Rods and Kits for quick and easy accessory attachment. Specifications: Weight: 45.5g (0.1 lbs) Dimensions: 33 x 25 x 70 mm (1.3 x 0.06 x 2.75 in)

The Accessory Plate NATO Bracket (Right Angle) allows users to attach Wooden Camera BURANO and KOMODO-X B-Boxes directly to 3rd party NATO side rails. These pieces can also be used with the Accessory Plate Collection like a Hook-and-Loop Plate or Accessory Plate through the M2.5 mounting points for a quick add-on or removal of accessories. This expands the Accessory Plate Collection , adding an option to connect to NATO Rail attachments for additional mounting options for users. Specifications: Weight: 16.6 g (0.04 lbs) Dimensions: 60 x 17 x 16 mm (2.4 x 0.7 x 0.6 in)

This slim profile Mounting Bracket for the Sony BURANO B-Box to ARRI Top Plate allows users to attach the Wooden Camera B-Box and Bolt-On Side Mount to the ARRI Top Plate for Sony BURANO cameras. A ¼”-20 screw with anti-twist pins attaches the bracket to the ARRI Top Plate while providing an additional mounting option for a ¼”-20 thread and variable anti-twist pins. Specifications: Weight: 16.6 g (0.04 lbs) Dimensions: 60 x 17 x 16 mm (2.4 x 0.7 x 0.6 in)

Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The receiving ⅜”-16 and ¼”-20 screw mount designs allow for many Universal Accessories like our ¼”-20 Cold Shoe , or Bolt-On Accessory Rail Clamp and Universal Hinge and Clamp to allow for Accessory Plates to be used in conjunction with this offset. These brackets come in four lengths 1in, 1.5in, 2in., and 3in., allowing users to choose the offset bracket that fits the accessory that needs to be mounted. In addition to providing the maximum customization to your rig, our Offset Brackets provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Included Items: 3/16” Hex Key Read the Accessory Plate blog to learn how each part of the system works together. Specifications: 1in (28mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 50 x 21 x 10 mm (1.97 x 0.83 x 0.39 in) 1.5in (38.1mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 58.7 x 21 x 11.5 mm (2.3 x 0.83 x 0.45 in) 2in (50.8mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 34.11 g (.08 lbs) | 71.6 x 21 x 11.5 mm (2.8 x 0.83 x 0.45 in) 3in (76.2mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 46.27 g (.1 lbs) | 97.1 x 21 x 11.5 mm (3.8 x 0.83 x 0.45 in)

Secure a Teradek Bolt 6 LT Transmitter in this Gold Mount Plus Dual Battery Plate Cradle and allow for pass-through power from the battery to the camera. This cradle has a voltage input range between 17.5 and 29V, with a maximum of 20A. Secure your Bolt 6 LT TX to the bottom of the cradle using an included captive ¼”-20 screw. Also compatible with Bolt 4K LT TX. This cradle requires a 2-pin cable to power the Bolt 6 LT TX/Bolt 4K LT TX. Specifications: Weight: 418 g (0.92 lbs) Dimensions: 74.6 x 81.7 x 119.4 mm (2.94 x 3.22 x 4.7 in)