WC Pro V-Mount (Sony FS7, FS5, Panasonic EVA1) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a DC connector compatible with Sony PXW-FS7, FS7mkII, FS5, and Panasonic EVA1 cameras. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Also works with Sony EX3 cameras. Cable length: 15 inches (381mm) Specifications: Weight: 181g (0.4 lbs) Dimensions: 120.7 x 83.8 x 20.8 mm (4.75 x 3.3 x 0.82 in) Pro Power Plates Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. D-Tap to Nikon D500, D610, D750, D800, D810, D850, D7000, D7100, D7200, D7500, Z6, Z7 (20") allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper voltage (9v) required by the camera. Cable length: 20 inches (508mm) Specifications: Weight: 136 g (0.3 lbs) Dimensions: 25.4 x 38.1 x 508 mm (1 x 1.5 x 20 in)

AIR EVF Mount (ARRI Alexa Mini MVF-1 / Mini LF MVF-2) is an ultra-lightweight EVF mount for the ARRI MVF-1 (K2.75004.0 ) used on Alexa Mini / Amira, the ARRI MVF-2 ( K2.00209160) used on the Alexa Mini LF, and the ARRI VF-1 (K2.72008.0 ) used on Alexa XT, SXT, SXT-W, and Classic. AIR EVF is almost half of the weight of products on the market, which is how it got the name! The system moves forwards and backwards over the lens area on two 15mm rods, left and right on a 19mm rod, and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. A top 15mm lightweight rod mount is required for proper attachment of the AIR EVF Mount, and the Master Top Handle, shown in the example photos and video is a good option for this. Alternatively, if you have the NATO Handle Plus v2 Kit or similar, a Rod Clamp (15mm LW) can be added to the front which would hold the two 15mm rods. Please contact us if you need any configuration assistance The tool-less design allows quick installation and removal of EVF and if further extension is needed for tripod shooting, the AIR EVF Extension Arm (ARRI Alexa Mini MVF-1 / Mini LF MVF-2) can be installed using the same method. Specifications: Weight: 282g (0.6 lbs) Dimensions: 158.8 x 145.5 x 45.4 mm (6.3 x 5.7 x 1.8 in) Master Top Handle Demo:

Alexa Mini Audio Cable (00 to 5pin XLR) adapts one 5pin connector to a single 5pin XLR (female) with a length of 18" (46cm). Note that Alexa Mini accepts two line level inputs only. Specifications: Weight: 136 g (0.3 lbs) Dimensions: 101.6 x 76.2 x 127 mm ( 4 x 3 x 5 in)

D-Tap to Alexa Mini / Mini LF connector allows you to power the ARRI Alexa Mini camera using any V-Mount or Gold Mount battery with a D-Tap plug. Extremely flexible version of this cable available here . Cable length: 16 inches (406mm) Specifications: Weight: 272.155 g (0.6 lbs) Dimensions: 25.4 x 127 x 152.4 mm (1 x 5 x 6 in)

D-Tap to Sony A7s connector allows you to power the A7, A7r, A7s, A7rII, or A7sII camera using any V-Mount or Gold Mount battery with a D-Tap plug. Voltage converter box mid cable adapts 14.4v to standard 7.4v required by camera. Cable length: 20 inches (508mm) Specifications: Weight: 23g (0.1 lbs) Dimensions: 508 x 25.8 x 11.6 mm (20 x 1.0 x 0.5 in)

Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Canon 5DmkIV DC connector. Works with Canon EOS R, R5, R6, 5DmkIV, 5D mkIII, 6D, 6DmkII, 70D, 7D, 7DmkII, Blackmagic Micro Cinema Camera, and Blackmagic Micro Studio Camera. Regulator integrated in the plate provides correct voltage to camera. 2x D-Taps on plate provide 12-16V depending on battery connected. Cable length: 16 inches (40cm) Specifications: Weight: 202g (0.4 lbs) Dimensions: 142.4 x 90.8 x 21.3 mm (5.6 x 3.6 x 0.8 in) Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. Battery door must be closed to power camera. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) .

ARRI LPL Mount for RED® Ranger Camera allows ARRI LPL Signature Prime Lenses to be used with RED® Ranger BRAINs with a full frame, VistaVision sized sensor (DSMC2™ MONSTRO). ARRI's LPL to PL Adapter is also compatible allowing easy change from standard PL lenses to LPL lenses. An external LDS-2 port is present but not currently utilized. Once external LDS-2 metadata workflows are created, this port can be connected to a metadata recorder. With Signature Prime SUP 2.1, 4pin data port will have Cooke /i metadata available. Click here for more details. Shim Set (stackable to achieve necessary thickness) Silver .0127mm (0.0005") Amber .0254mm (0.001") Purple .0381mm (0.0015") Red .0508mm (0.002") Green .0762mm (0.003") Tan .1016mm (0.004") Blue .127mm (0.005") Specifications: Weight: 216g (0.5 lbs) Dimensions: 81.8 x 81.8 x 46.5 mm (3.2 x 3.2 x 1.8 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified BMPCC4K / BMPCC6K Camera Cage (Bottom Bracket Only) attaches to the bottom of the Blackmagic Pocket Cinema Camera 4K / 6K for use with the Unified BMPCC4K / BMPCC6K Camera Cage .

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Post from Director's Monitor Cage v1. Included: (1) 1/4-20 x 2" socket cap screw

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Offset adapter from Director's Monitor Cage v1. Included: (2) 1/4-20 x 3/8" button head screws (2) 1/4-20 x 1/2" button head screws

WC Pro Gold Mount (Canon C200, C200B, C300mkII) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a Canon C300mkII, C200, C200B connector. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. 12" cable exits the right side of the plate allowing easy insertion into the camera. Custom lengths available up to 6ft for no additional charge. Additional lengths available as needed. Send us an email with your requirements: sales@woodencamera.com Mounting Options: To mount the WC Pro Gold Mount onto the C300mkII, C200, or C200B we recommend the below combination: Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . Specifications: Weight: 186g (0.41 lbs) Dimensions: 146.1 x 76.2 x 19.1 mm (5.75 x 3 x 0.75 in) Pro Power Plates Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. The UFF-1 Universal Follow Focus (Extension Only) hand wheel extension allows users to offset either wheel by 75mm (3 inches) which is great when using a large diameter lens or when in 15mm studio mode. UFF-1 Universal Follow Focus Demo:

15mm Tube Clamp (URSA) attaches under or over the Blackmagic URSA Handle, and to the camera bodies of the Sony FS5 and EVA1. Slotted screw pattern allows attaching to two 1/4-20 holes up to 54mm apart center to center. Includes 2x 1/4-20 socket cap screws Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 50.8 x 76.2 x 152.4 mm ( 2 x 3 x 6 in)

D-Tap to Mini USB is a voltage converter cable that accepts 12 to 24V input and converts to standard 5V mini USB output. Great for charging devices like RED®MOTE, iPhone cases, cell phones, etc. Plugs into standard D-Tap port on battery or power plate. Cable length: 20in (51cm) Specifications: Weight: 27g (0.1 lbs) Dimensions: 508.0 x 25.8 x 11.6 mm (20.0 x 1.0 x 0.5 in)

RED® Weapon/Scarlet-W/Epic-W/ Raven/Epic/Scarlet is a right angle power connector to flying leads with 24 inch cable (.6 meters) that allows you to wire custom power solutions for the camera. Wiring should be done by electrical engineer and triple checked prior to use. Wooden Camera, Inc. will not be held liable for faulty wiring or misuse. Cable length: 24 inches (.6 meters) Specifications: Weight: 78g (0.2 lbs) Dimensions: 609.6 x 12.3 x 12.3 mm (24.0 x 0.5 x 0.5 in)

D-Tap to Mini 4pin XLR (Unregulated) for unregulated applications such as TV Logic 5.6 or Alphatron EVF using any V-Mount or Gold Mount battery with a D-Tap plug. Please verify your devices requirements prior to use of any unregulated cable. Some devices, such as the TV Logic VFM-055A may require regulation. Cable length: 15 inches (380mm) Specifications: Weight: 23g (0.1 lbs) Dimensions: 380 x 25.8 x 11.6 mm (15.0 x 1.0 x 0.5 in)

RED® DSMC1™, DSMC2™ FLEX Power Extension (Right Angle, 24") is a power cable that extends any RED® Epic/Scarlet battery plate or AC adapter by 24 inches (.6 meters) and ends with a right angle connector. Cable is wired to transmit battery percentage data if present. Straight connector version also available. Compatible with: WC V-Mount (Epic/Scarlet) QB Switronix V-Mount QB Anton Bauer (QRC-EPIC) Switronix Gold Mount (Epic/Scarlet) Jetpack V-Mount (Epic/Scarlet) Jetpack Gold Mount (Epic/Scarlet) RED® brand battery plates for Epic/Scarlet 3rd party battery plates for Epic/Scarlet Specifications: Weight: 74g (0.2 lbs) Dimensions: 304.8 x 38.6 x 12.3 mm (12.0 x 1.5 x 0.5 in)

Converts Rod Clamp (19mm) & (15mm Studio) into top rods. Captured screw design. Includes: (2) 1/4-20 x 7/8" screws (3) 1/4-20 x 5/8" screws Specifications: Weight: 70g (0.2 lbs) Dimensions: 54.2 x 22.5 x 20.1 mm (2.1 x 0.9 x 0.8 in)

NATO Lock GoPro (Clamp Only) is the quick release clamp portion of the NATO Lock GoPro Kit which is based on NATO standards. The clamp portion of the kit includes a GoPro attachment point that can bolt to the underwater housing or frame. Includes M5 screw and the original GoPro thumbscrew can be used if preferred. Tilt and adjust 180 degrees. Loosen two phillips screws on clamp bottom to rotate mount orientation in relation to the gray thumbscrew. Compatible with RED® Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products. Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 50.8 x 76.2 x 25.4 mm ( 2 x 3 x 1 in) NATO Lock and Magic Arm Overview

Right angle Micro HDMI to Full HDMI with coiled cable. High quality connectors and cable. At rest, the cable measures 20 inches (50.8 cm) and stretches up to 32 inches (81 cm). * These cables are not compatible with 4K signals. Specifications: Weight: 90.7 g (.2 lbs) Resting length: 20 inches (50.8 cm) Fully stretched length: 32 inches (81.3 cm)

Canon C200, C200B, C300mkII FLEX Power Extension (Straight, 36") is a power cable that extends the Canon C200, C200B, and C300mkII plate or AC adapter by 36 inches (.9 meters) and ends with a right angle connector. Cable is wired to transmit battery percentage data if present. Compatible with: WC V-Mount (C200, C200B, C300mkII) WC Gold Mount (C200, C200B, C300mkII) 3rd party battery plates for Canon C300mkII Specifications: Weight: 136 g (0.3 lbs) Dimensions: 25.4 x 127 x 152.4 mm (1 x 5 x 6 in)

D-Tap to Canon C200, C200B, C300mkII (24") allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. Specifications: Weight: 136 g (0.3 lbs) Dimensions: 25.4 x 127 x 152.4 mm (1 x 5 x 6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Manufactured by our sister company, Rycote , using high quality materials, the VX Skateboard Camera Mic Deadcat Windscreen reduces wind noise when recording with the VX Mic . VX Skateboard Camera Mic Overview: VX Skateboard Camera Mic Features:

Wooden Camera brand Gold Mount plate utilizing an Anton Bauer mount and Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro connector. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . 2x D-Tap ports for accessory power. Cable length: 16 inches (406.4mm) Specifications: Weight: 187g (0.4 lbs) Dimensions: 142.6 x 92.1 x 21.9 mm (5.6 x 3.6 x 0.9 in)

D-Tap to Fujifilm X-H1, X-T2, X-T3 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper voltage required by the camera. Cable length: 20 inches (508mm) Specifications: Weight: 227 g (0.5 lbs) Dimensions: 69.9 x 38.1 x 508 mm (2.75 x 1.5 x 20 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Adapts two Easy Plates at a right angle. Includes: (3) 1/4-20 x 3/8" screws Specifications: Weight: 23g (0.1 lbs) Dimensions: 47 x 20 x 9.8 mm (1.9 x 0.8 x 0.4 in)

Gimbal Handle Bar Bracket (Gold Mount) combines all the necessary components together to mount Gold Mount batteries to your gimbal, c-stands, and more! The WC Super Clamp's rubberized jaws clamp extremely tight with no slippage and the Bolt On Battery Mount allows for the WC Gold Mount (Dual D-Tap) to be attached. Plate provides unregulated 12V power (12-16V depending on battery connected) through 2x D-Taps on plate. Specifications: Weight: 453.592 g (1 lb) Dimensions: 50.8 x 101.6 x 177.8 mm ( 2 x 4 x 7 in)

Adapts industry standard balanced 5 pin XLR using a female plug to a ARRI Alexa audio connector. Highest quality professional grade connectors. Cable is wired in an ARRI standard configuration with a 12 inch cable length.

Ultra Arm Ball (Super Clamp) is a component of our Ultra Arm lineup which has a universal clamping jaw on one end and a 25mm (1 inch) ball on the other. Ideal for use with 15mm Rods , 19mm Rods , Cruiser handlebars , C-stands, etc. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight: 136 g (0.3 lbs) Dimensions: 76.2 x 25.4 x 101.6 mm (3 x 1 x 4 in)

15V Power Supply UK for Canon C300mkII camera is a 1B cable that plugs into the 1B Power input on the camera and provides up to 10A.

Side mounting plate for Blackmagic URSA Camera. Attaches over right side LCD control interface to expand mounting surface for accessories. Arrays of 1/4-20 and 3/8-16 holes in standard spacing. Includes: (3) M3 socket cap screws Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 25.4 x 50.8 x 152.4 mm (1 x 2 x 6 in) Sideplate Adapters for Blackmagic URSA: Blackmagic URSA Camera Accessory Kit Configuration Guide

D-Box Sony Venice, Venice 2 Replacement Link Cable (With Recorder Installed, 3.5") is a replacment part for our Sony Venice, Venice 2 D-Box . For use when the Sony AXS-R7 Recorder is installed. Specifications: Weight: 22.7g (0.05 lbs) Dimensions: 146.1 x 31.8 x 12.7 mm (5.75 x 1.25 x 0.5 in)

D-Box Sony Venice, Venice 2 Replacement Link Cable (With Teradek Module and Recorder Installed, 5.5") is a replacment part for our Sony Venice, Venice 2 D-Box . For use when a Teradek Bolt and Sony AXS-R7 Recorder are installed. Specifications: Weight: 25g (0.055 lbs) Dimensions: 225.4 x 31.8 x 12.7 mm (8.875 x 1.25 x 0.5 in)

D-Box Flying Leads Cable (D-Tap) is a male D-Tap connector that is wired in an industry standard configuration with a 24 inch cable length. Wooden Camera will not be held responsible for any miswiring.

D-Box Flying Leads Cable (3pin Fischer) is a 3 pin Fischer that is wired in an ARRI standard configuration with a 24 inch cable length. One would typically use this connector assembly for 24V cables. Wooden Camera will not be held responsible for any miswiring. Connectors used in this assembly are not manufactured by Fischer but are made to the same specifications and are Fischer compatible.

Crossbar v2 Kit consists of a NATO rail on top with safety pins on each end, 1/4-20 and 3/8-16 holes for attaching accessories, 1/4 inch pass through slots for attaching to cheeseplates and rod clamps, and ARRI standard rosettes on each end for attaching Rosette Arms and Rosette Grips. Shoulder Rig Assembly: Camera Shoulder Support Rigs Options Guide

Wooden Camera Handgrip Trigger Box BNC for RED® cameras attaches to the Wooden Handgrip (Right) and (Left) to add start/stop functionality when combined with the B-Box (RED® DSMC2™) . This system is ideal for RED® Epic and Scarlet, as well as RED® Weapon, Epic-W,Scarlet-W, and Raven when using the Base Expander Module but note that the B-Box is also required. D-Tap power source is needed so the internal board can provide 5V to the camera to start and stop recording. The same control box works with both the Left and the Right grip. Simply remove the captured M3 screws and insert them from the opposite side. Special Note: If you do not own the Wooden Camera B-Box, you should instead choose Wooden Camera Handgrip Trigger Box 00 (RED® DSMC2™) , which is the 00 compatible connector version of this system. Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 177.8 x 127 x 152.4 mm (7 x 5 x 6 in)

3pin Fischer Trigger Cable BNC for RED® cameras connects the Wooden Camera Handgrip Trigger Box to add start/stop functionality when combined with the B-Box (RED® DSMC1™, DSMC2™) . This system is ideal for RED® Epic and Scarlet, as well as RED® Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven when using the Base Expander Module but note the B-Box is also required. D-Tap power source is required so the internal board can provide 5V to the camera to start and stop recording. The same control box works with both the Left and the Right grip. Simply remove the captured M3 screws and insert them from the opposite side. Special Note: If you do not own the Wooden Camera B-Box but do own the Trigger Box, you should instead choose 3pin Fischer Trigger Cable 00 (RED® DSMC1™, DSMC2™) , which is the 00 connector version of this cable. Connectors used in this assembly are not manufactured by Fischer but are made to the same specifications and are Fischer compatible. Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 50.8 x 101.6 x 177.8 mm ( 2 x 4 x 7 in)

Director's Monitor Cage v3 Vertical Conversion Kit allows users to adapt the Director’s Monitor Cage V3 for vertical video monitoring. Handle adapters are installed on the top and bottom brackets of the cage using 1/4-20 screws. Included c-stand adapter can be installed on the lower, 15mm rod, allowing the vertical configuration to be mounted on a baby pin. Includes: (2) Handle Adapters (1) C Stand Adapter (4) ¼-20 x ½ socket button head (1) 5/32 allen wrench Specifications: Weight: 70 g (0.15 lbs) Dimensions: 76.2 x 76.2 x 25.4 mm (3 x 3 x 1 in)

ARRI-standard, stainless steel rosette with M6 internal threads. Attaches to any 3/8-16 threaded hole with ARRI-standard locating pins. Perfect for attaching handles and other rosette-based accessories. Special Note: Be cautious when installing ARRI rosette accessories onto Bolt-On ARRI Rosette (3/8-16) due to 6mm screw depth. Specifications : Weight: 5g (0.01lbs) Dimensions: 32 x 32 x 20 mm (1 x 1 x 0.7 in)

Preston MDR2 V-Lock Accessory Mount Kit is an ultra-lightweight mounting plate for the Preston MDR2 control unit and includes a quick release set based on the standard V-Lock or V-Dock as it is sometimes referred. The V-Lock Accessory Wedge can attach to the MDR-2 bracket in many places and orientations. The Base Station portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws and ARRI accessory mount locating pins can be installed to prevent twisting. *Not compatible with V-Mount battery accessories Specifications: Weight: 181.437 g (0.4 lbs) Dimensions: 101.6 x 76.2 x 127 mm ( 4 x 3 x 5 in)

Wooden Camera brand Gold Mount plate utilizing an Anton Bauer Mount and Canon T5i DC connector. Works with Canon T2i, T3i, T4i, and T5i. Voltage regulator integrated in the plate provides constant 8V to camera . 2x D-Taps on plate provide 12-16V depending on battery connected. Cable length: 16 inches (40cm) Specifications: Weight: 98g (0.2 lbs) Dimensions: 119.2 x 85.1 x 12.9 mm (4.7 x 3.4 x 0.5 in) Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . Custom lengths up to 6ft available at the same price (additional length available with a small fee). Send us an email with your requirements: info@woodencamera.com Camera Configuration Guides: Canon T5i Camera Accessory Kit (Pro)

Wooden Camera brand Gold Mount plate utilizing an Anton Bauer Mount and Canon 5DmkIV DC connector. Works with Canon EOS R, R5, R6, 5DmkIV, 5DmkIII, 6D, 6DmkII, 70D, 7D, 7DmkII, Blackmagic Micro Cinema Camera, and Blackmagic Micro Studio Camera. Regulator integrated in the plate provides correct voltage to camera. Two D-Taps on plate provide 12-16V depending on battery connected. Cable length: 16 inches (40cm) Specifications: Weight: 98g (0.2 lbs) Dimensions: 119.2 x 85.1 x 12.9 mm (4.7 x 3.4 x 0.5 in) Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) .

D-Box Sony Venice, Venice 2 Replacement Link Cable (No Recorder Installed, 2") is a replacment part for our Sony Venice, Venice 2 D-Box . For use when the Sony AXS-R7 Recorder is not installed. Specifications: Weight: 22.7g (0.05 lbs) Dimensions: 111 x 31.8 x 12.7 mm (4.38 x 1.25 x 0.5 in)

VX Skateboard Camera Mic Horseshoe Mounting Bracket fits between a camera shoe and the VX Mic to allow for additional shoe mounted accessories to be attached to the top or side or a single 1/4-20 accessory to the top. Ideal for adding an on-camera LED light, SmallHD monitor, etc. It would not be advisable to attach a handle on top as there would be too much force and leverage on the shoe mount. Specifications: Weight: 26g (0.06 lbs) Dimensions: 41.1 x 19.1 x 64 mm (1.62 x .75 x 2.5 in) VX Skateboard Camera Mic Features:

Step-up Ring (77mm to 85mm) adapts lenses with 77mm front threads and to an outer 85mm outer lens diameter for use with the Zip Box Pro . Ring thickness of 10mm provides secure attachment. An 82mm filter can be screwed to the inside of the ring for additional mounting support. Users may experience vignetting at 20mm or wider depending on the lens. Contact support@woodencamera.com for more information. Specifications: Weight: 22 g (.05 lbs) Dimensions: 85 x 85 x 13 mm (3.35 x 3.35 x .6 in)