Gimbal Battery Bracket (RED® DSMC2™) attaches directly to the side of the RED® DSMC2™ Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2™ cameras using four M3 captured screws and provides mounting points for standard V-Mount and Gold Mount battery plates. The red colored lever allows the record and power button to remain functional while the bracket is installed. This product is ideal for use with the RED® Base Expander Module, Jetpack, and upcoming Wooden Camera power module where the standard DSMC power input is present. V-Mount and Gold Mount plates can be attached in many ways, all of which are engraved onto the product itself. This includes positions right side up, upside down, sideways, etc. Recommended with this product are the WC V-Mount (Epic/Scarlet) , WC Gold Mount (Epic/Scarlet) , and Power Extension Cables . Includes: (4) m3x8mm phillips screws (4) m3x12mm phillips screws Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 25.4 x 101.6 x 177.8 mm (1 x 4 x 7 in) RED® Weapon Accessories Overview:

Gimbal ARRI Rosette v2 for 30mm tubes attaches to gimbal crossbars with a 30mm diameter, like the DJI Ronin, and provides a threaded ARRI standard rosette for attaching handgrips. This is ideal for handles with start/stop capabilities like our Wooden Camera Handgrip with Trigger Box , Canon C300 Handgrip Relocator , and the Panasonic EVA1 Handgrip Relocator . Includes: - Ratcheting Thumbscrew - ARRI M6 Threaded Rosette Specifications: Weight: 226.8 g (.5 lbs) Dimensions: 50.8 x 76.2 x 152.4 mm ( 2 x 3 x 6 in) ARRI Rosette Gear:

Top Plate (Sony Rialto/Venice Extension Head) is a top cheeseplate for the Sony Rialto that contours to the shape of the camera body and offers LW 15mm rod support. Plate provides rows of 1/4-20 and 3/8-16 holes for attaching Handles, UVF Mount v2, Rod Clamps, and more. ARRI accessory mounts also in several places (3/8-16 threaded hole with locating pins adjacent). Mounting holes available and marked for Sony top handle. Specifications: Weight: 200 g (0.44 lbs) Dimensions: 120.65 x 79.5 x 28.7 mm ( 4.75 x 3.13 x 1.13 in)

Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and a DC connector compatible with Sony PXW-FS7, FS7mkII, FS5, and Panasonic EVA1. This model also works with Sony EX3 cameras. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Voltage regulator integrated in the plate provides constant 12V to camera . Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . 2x D-Tap ports for accessory power. Cable length: 16 inches (406mm) Specifications: Weight: 187g (0.4 lbs) Dimensions: 142.6 x 92.1 x 21.9 mm (5.6 x 3.6 x 0.9 in) Custom lengths up to 6ft available at the same price. Send us an email with your requirements: info@woodencamera.com Camera Configuration Guides: Sony FS5 Unified Camera Accessory Kit (Pro) Sony FS7 Unified Camera Accessory Kit (Pro)

WC Pro V-Mount (Canon C100, C100mkII, C300, C500) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a C-Series DC connector. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. 16" cable exits the right side of the plate allowing easy insertion into the camera. Custom lengths available up to 6ft for no additional charge. Additional lengths available as needed. Send us an email with your requirements: info@woodencamera.com Please note: This device is also compatible with the 9V DC Input of the FUJIFILM VG-XT3 Vertical Battery Grip, allowing for external power of Fuji X-series cameras when using the grip in our Unified DSLR Cage (Large) . Specifications: Weight: 186g (0.41 lbs) Dimensions: 146.1 x 76.2 x 19.1 mm (5.75 x 3 x 0.75 in) Pro Power Plates Overview: