8" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mountin...
View full details
NATO standard, 70mm long, quick release rail attaches to any two 1/4-20 holes up to 42mm apart center to center and provides a mount for NATO Handl...
View full details
GorillaGrip® by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than ...
View full details
GorillaGrip by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than st...
View full details
GorillaGrip® by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than ...
View full details
NATO Rosette (ARRI) combines the quick release functionality of NATO accessories with ARRI standard rosettes. Attaches to Safety NATO Rail, Safety ...
View full details
Universal Lens Support (19mm/15mm Studio) supports heavy lenses when using 19mm or 15mm studio rods. Convertible between both studio rod standards....
View full details
Double sided velcro cable ties great for managing excess cable on set. Pack of 10 ties.Specifications:Weight: 90.7 g (0.2 lbs)Dimensions: 228.6 x 1...
View full details
Coiled HD-SDI - BNC to BNC cable. Extends from 10" resting length to 20" to allow mobility and adjusting of on board monitors, wireless systems, an...
View full details
Coiled HD-SDI – BNC to BNC cable. Extends from 20" resting length to 36" to allow mobility and adjusting of on-board monitors, wireless systems, an...
View full details
Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridg...
View full details
Ultra Arm Ball (NATO Clamp) is a component of our Ultra Arm lineup which clamps to any quick release, NATO standard accessory rail and has a 25mm (...
View full details
Ultra Arm Ball (Cold Shoe) is a component of our Ultra Arm lineup which attaches to any camera hot shoe or accessory hot shoe mount and has a 25mm ...
View full details
UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simpl...
View full details
The V-Lock Base Station and Wedge Kit (ARRI Accessory Mount 3/8-16) is a quick release set based on the standard V-Lock or V-Dock as it is sometime...
View full details
The Universal Ultra Arm is a strong articulating arm for attaching accessories to your camera or rig. It has two points of articulation so you can ...
View full details
Mini Offset Cold Shoe Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a ...
View full details
Cold Shoe Riser Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standa...
View full details
Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of yo...
View full details
Universal Lens Support (15mm LW) supports heavy lenses when using 15mm lightweight rods. Includes 1/4"-20 cap for attaching to tripod collars and ...
View full details
Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to ...
View full details
The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 i...
View full details
Wooden Camera Multi-Tool features an all metal construction and folds up into a compact form that easily fits into a pocket or toolbox. The Multi-T...
View full details
Zip Box Pro 4x5.65 (Complete Kit) is a lightweight and compact, clamp-on mattebox for various diameter lenses which can hold three 4x5.65 filters t...
View full details
Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to ...
View full details
Zip Box Pro 4x5.65 (Clamp On) is a lightweight and compact, clamp-on mattebox for up to 114mm diameter lenses which can hold three 4x5.65 filters t...
View full details
Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors, rosettes, handles, and oth...
View full details
Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for l...
View full details
Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for...
View full details
The 3/8"-16 Accessory Cube provides five sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two ...
View full details
Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...
View full details
A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance.Specifications:Weight: 325 g (0.7 lbs)Dimensions: 180...
View full details
Customize your Accessory Plate setup by adding a lightweight dual 15mm rod attachment for bolt-on accessories. Compatible with the Bolt-On Accessor...
View full details
Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. S...
View full details
Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a h...
View full details
Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount it...
View full details
Add a new way to stash your timecode sync box or camera port caps in a secure and organized way to your camera builds. This plate includes soft sid...
View full details
The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...
View full details
The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plat...
View full details
Customize your carrying style with any of the modular and ergonomic Ultra Handle Systems or Kits. Each offering features lightweight, durable, non-...
View full details
The Ultra Handle 5" NATO Kit features a lightweight, durable, non-slip handle with Bocote hardwood inserts for comfort, and two pass-through holes ...
View full details
The Universal 15mm Rod Clamp is a single rod clamp that attaches a 15mm rod to any 1/4"-20 or 3/8"-16 mounting point.Three options in removable bas...
View full details
The Universal 19mm Rod Clamp is a single rod clamp that attaches a 19mm rod to any 1/4"-20 or 3/8"-16 mounting point.Three options in removable bas...
View full details
The 1/4”-20 Accessory Cube provides 5 sides of ¼”-20 mounting points for adding accessories to your build and comes in a 1/4"-20 or 3/8"-16 screw a...
View full details
Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, sili...
View full details
The NATO Rail (¼”-20) was specifically designed to be a quick solution to mount SmallHD and Teradek accessories to your setup like an Ultra 7 or Bo...
View full details
Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnet...
View full details
