The Ultra Handle Support Bracket is a lightweight, yet sturdy bracket designed to stabilize longer handle configurations and offset any flexing. This bracket mounts to the Ultra Handle using either the ¼”-20 mounting option or the ⅜”-16 option. This works on systems with threaded hole patterns that are on 1” centers. Included Items: 3/16” Hex Key Specifications: Ultra Handle Support Bracket (1/4"-20): 28.5 g (0.06 lbs) | 18.5 x 22 x 65.4 mm (0.04 x 0.9 x 2.6 in) Ultra Handle Support Bracket (3/8"-16): 28.5 g (0.06 lbs) | 18.5 x 22 x 65.4 mm (0.04 x 0.9 x 2.6 in)

Developed based on a direct request from a user, the Rigging Top Plate for RED® KOMODO-X™ expands the possibilities of adding accessories to the top of the camera body. This Top Plate offers an abundance of ⅜”-16 and ¼”-20, anti-twist mounting points on the top and sides of this plate allowing users to reposition the top handle or mount additional accessories. Additionally, this Top Plate protects the top screen of the camera and allows for added rigging for car mounts or camera arrays. Designed to be used with the Top Cheese Plate and Rear Cage , four ¼”-20 screws securely attach all these elements adding stability and function. Included Items: 3/16” Hex Key Specifications: Weight: 144.5 g (0.3 lbs) Dimensions: 105.6 x 86 x 16.5 mm (4.2 x 3.4 x 0.65 in)

The Top Cheese Plate securely mounts to the KOMODO® or KOMODO-X™ using two ¼”-20 screws with anti-twist pins and adds seven ¼”-20, anti-twist mounting points. The plate connects directly to the top of the camera, allowing the contact pins to pass Run/Stop connection through the plate. This Top Plate can be used in tandem with the Ultra Handle Upright for RED® DSMC3™ as well as the Rigging Top Plate. Included Items: 3/16” Hex Key Specifications: Weight: 52 g (0.11 lbs) Dimensions: 31.4 x 85 x 10.5 mm (1.2 x 3.3 x 0.4 in)

Expand your power options on the KOMODO-X™ by adding the D-Box® to your system, this D-Box converts from the camera’s native V-Mount to Gold Mount. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box as well as the B-Box for (KOMODO®, KOMODO-X™, V-RAPTOR®) . On the assistant's side of the camera there is a DC-In port for connecting additional power items like block batteries and an EXT Out option is also included to pass connectivity options to a B-Box to be connected to the system, as needed. Included Items: EXT Cable (9-pin 0B RA Male to 9-pin 0B RA Male, 5in) Specifications: D-Box® - Gold Mount (RED® KOMODO-X™): 259 g (0.6 lbs) | 38.9 x 78.25 x 105 mm (1.5 x 3.1 x 4.1 in) D-Box® - V Mount (RED® KOMODO-X™): 273.5 g (0.6 lbs) | 48 x 103 x 100 mm (1.9 x 4.1 x 3.9 in)

This cable connects from the EXT port of the camera to the D-Box® for KOMODO-X™ system providing Run/Stop abilities to the 3-pin connector port.

Add ⅜”-16 and ¼”-20 mounting points on the sides of your build by attaching these sleek, lightweight Side Rails. These rails give users the flexibility to mount accessories like Bolt-On Rods for lens motors and 25mm Bolt-On Rosettes on either side of the camera. Can be used as a stand-alone accessory or in addition to the Rear Cage and Top Cheese Plate to give users a complete Cage System, these side rails were made to give KOMODO® and KOMODO-X™ users much-needed real estate for adding accessories. The side rails are designed to be compatible with the Adapter Support Brackets for RED’s KOMODO RF to PL lens mount with their forward facing M4 holes. For KOMODO: Left side Rail does cover up the audio ports Microphone and Headphones. Included Items: Side Rail - Left - RED® KOMODO®, KOMODO-X™ Side Rail - Right - RED® KOMODO®, KOMODO-X™ Specifications: Weight: 95 g (0.2 lbs) Dimensions: 53 x 33 x 97 mm ( 2.1 x 1.3 x 3.8 in)

The Ultra Handle System is a modular, integrated system designed to adapt to any shooting style and camera build by adding or removing handle extensions as needed. This system comes with a riser allowing the contacts on the camera to pass a 3-pin connector with trigger ability through the handle, thereby allowing third-party options to start and stop the camera roll. Also included in the system is a ¼”-20 Support Bracket for added stability, a non-slip 4” Handle with durable Bocote hardwood inserts for comfort. The Handle has two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. It also includes two 3” Handle extensions, a 1” Extension, a Right Angle Extension with Bocote hardwood insert, and a Hex Wrench. Lastly, this full system includes 24 color rings (six each in red, blue, green, and yellow) to place between components. Included Items: 3/16" Hex T Handle Ultra Handle Upright for RED® DSMC3™) Ultra Handle Extension Module 1" Ultra Handle Extension Module 4" 2x Ultra Handle Extension Module 3" Ultra Handle Extension Module Right Angle Ultra Handle Support Bracket (1/4-20) Ultra Handle Color Ring Pack Ultra Handle Support Bracket (RED® KOMODO-X™ with RMI) Specifications: Weight: 649 g (1.43 lbs) Dimensions: 300 x 61 x 147 mm ( 11.8 x 2.4 x 5.8 in)

These EXT cables connect from the D-Box® for KOMODO-X™ to the B-Box (KOMODO®, KOMODO-X, V-RAPTOR®), allowing for EXT options like Timecode, Control, Genlock as well as 24V power and Run/Stop ability to the 3-pin port on the B-Box. When the Rear Cage is in use and the B-Box is connected, the 3” Right Angle cable is the best option. The 5” and 12” Right Angle to Straight adds length to allow for alternative placement of the B-Box.

These EXT Cables connect from the camera's EXT port to the B-Box for (KOMODO®, KOMODO-X™, V-RAPTOR®) directly, breaking out control options like Timecode, Control, Genlock and 3-pin Run/Stop ability. Two length options of 4” or 12“ were intended to keep your B-Box in the place that works best for the user's needs. The 4” length was designed to be used with the Rear Cage and keeps the build tidy. The 12” length allows users to place the B-Box anywhere that works best for them, this could be along the camera's cage system like Side Rails or 3rd party system options. Please note, the 3-pin port will not provide 24V power in this configuration unless connected to the D-Box® for KOMODO-X. Pre-Order Terms and Conditions

The ARCA Base Plate was designed for dual 15mm LW rods and allows for maintaining optimal lens height for studio-style builds. This Base Plate comes with a quick-release lever to be used with the ARCA Riser when lightweight builds are necessary. This Base Plate includes a Bridge Plate Dovetail for use with either 15mm or 19mm Bridge Plates and tripod plates. Our ARCA system allows quick adjustments from a studio build to a Steadicam or Handheld build in seconds. Included Items: Bridge Plate Dovetail P00109 Specifications: Weight: 337 g (0.75 lbs) Dimensions: 88.25 x 117.5 x 44.5 mm (3.5 x 4.6 x 1.75 in)

The ARCA Riser incorporates an anti-twist block design built into the bottom of the camera. The Riser was intended for use with the ARCA Baseplate , allowing users to transition to a lightweight rig when rods and lens support are no longer needed. The design prevents any movement on the Riser itself providing the user with a safe and secure connection. Safety features prevent the camera from sliding off the baseplate. The ARCA Riser plate keeps the camera at its optimal lens height while offering mounting points along the base of the system as well as Lens Support mounts to prevent mount shift on Cine-style lenses. Included Items: 3/16” Hex Key Specifications: Weight: 157 g (0.3 lbs) Dimensions: 108 x 95.25 x 20.8 mm (4.25 x 3.75 x 0.8 in)

There are three options in Mount Support for KOMODO-X™ between RF to LPL and RF to PL that are compatible with the ARCA Riser for KOMODO-X. Mount supports help prevent any rotation in mount adapters, providing a solid connection when rotating the lens barrels for the desired shot. The RF to PL Supports offer a secure mounting point between the PL mount and Riser, users can adjust the height and tighten the clamp to the riser screw to prevent mount flex. V1 is compatible with the Canon RF to PL Mount Adapter (Pro) and V2 is compatible with the Canon RF to PL Mount Pro (RED® V-Raptor®, KOMODO®, KOMODO-X™) The RF to LPL Support secures your LPL mount to the Riser and allows users to adjust the height as well as tighten the clamp to the riser screw to prevent mount flex. This Support is compatible with the Canon RF Mount to ARRI LPL Mount Adapter. Included Items: 3/16” Hex Key Specifications: RF to PL (V1) Mount Support (RED® KOMODO-X™): 42.5 g (0.09 lbs) | 20.5 x 60.6 x 15 mm (0.8 x 2.4 x 0.6 in) RF to PL (V2) Mount Support (RED® KOMODO-X™): 53.8 g (0.1 lbs) | 25.2 x 60.6 x 20 mm (1 x 2.4 x 0.8 in) RF to LPL Mount Support (RED® KOMODO-X™): 1.53 g (0.1 lbs) | 21.8 x 60.6 x 17 mm (0.85 x 2.4 x 0.7 in)

The Ultra Handle Upright for the RED® system has the appropriate ¼”-20 spacing for use with KOMODO-X™, KOMODO® and V-RAPTOR® camera s. This Upright includes pogo pins for the 3-pin connector that allows for Run/Stop trigger function. The design also includes six ⅜”-16, anti-twist pin inserts and dual front-facing ¼”-20 screw holes. This Upright is also compatible with the DSMC3™ RED® Touch 7.0” Monitor’s RMI connection. Specifications: Weight: 97.3g (0.21 lbs) Dimensions: 25.4 x 63.7 x 70 mm (1 x 2.5 x 2.75 in)

The Side Rail - Left gives users mounting points on the left side of the KOMODO® or KOMODO-X™ as well as Sensor Plane markings. This rail offers four ⅜”-16 and two ¼”-20, anti-twist mounting points where you can add accessories like Bolt-On Rods for lens motors or any of our universal accessories. Can work as a standalone item or in tandem with the Rear Cage and Side Rail - Right , this system together was designed to provide all-around rigging for the KOMODO-X. The side rails are designed to be compatible with the Adapter Support Brackets for RED’s KOMODO RF to PL lens mount with their forward facing M4 holes. Included Items: 3mmHex Key Specifications: Weight: 47.5 g (0.10 lbs) Dimensions: 53 x 16.5 x 97 mm (2.1 x 0.65 x 3.8 in)

Expand your handheld game by adding Side Grips to your setup. These grips include cold shoe mounts at the top of each handle, allowing you to mount accessories like mics for those compact shooting scenarios. The lightweight grips include ⅜”-16 and ¼”-20 mounting points on the outside of the grips to allow for mounting any additional accessories. Included Items: Ultra Handle Side Offset - Top Right Ultra Handle Side Offset - Bottom Right Ultra Handle Side Offset - Top Left Ultra Handle Side Offset - Bottom Left 2 x Ultra Handle 4” 3/16” Hex Key Specifications: 95 g (0.2 lbs) | 53 x 33 x 97 mm (2.1 x 1.3 x 3.8 in)

Customize your carrying style with any of the modular and ergonomic Ultra Handle Systems or Kits. Each offering features lightweight, durable, non-slip handles with Bocote hardwood inserts for comfort, and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. All handles add an array of ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots, one ⅜”-16 bolt, and two 3mm location pins. These Ultra Handle Systems and Kits are compatible with Wooden Camera, ARRI, and third-party accessories. The top-tier Ultra Handle System includes two 5” Handles, a Universal Front and Rear Upright, 3” Handle, 1” Extension, Right Angle Extension, as well as 24 color rings (six each in red, blue, green, and yellow) to place between components. The Standard Kit features one 5” Handle, a Universal Front and Rear Upright, 1” extension, and a Hex Wrench. The 5” and 3” Kits include a 5” and 3” extension, respectively, as well as a single Universal Upright, 1” Extension, and a Hex Wrench. Included Items: A00104 | Ultra Handle System (Universal 3/8"-16) 2 x Ultra Handle Extension (5") Ultra Handle Extension (3") Ultra Handle Extension (Right Angle) Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) Ultra Handle Color Rings Pack (6x Red, 6x Blue, 6x Green, 6x Yellow) 3/16" T Handle Hex Wrench Specifications: Weight: 759 g (1.7 lbs) Dimensions: 400 x 50 x 147 mm (15.7 x 1.97 x 5.8 in) A00426 | Ultra Handle Standard Kit (Universal 3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 474 g (1.04 lbs) Dimensions: 203 x 50 x 70 mm (8 x 2 x 2.8 in) A00338 | Ultra Handle 5" Kit (3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 376 g (0.8 lbs) Dimensions: 178 x 50 x 70 mm (7 x 2 x 2.8 in) A00337 | Ultra Handle 3" Kit (3/8"-16) Ultra Handle Extension (3") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 339.5 g (0.75 lbs) Dimensions: 127 x 50 x 70 mm (5 x 2 x 2.8 in)

The ergonomic, modular Ultra Handle Systems and Kits integrate seamlessly into the Sony VENICE and Rialto Extension. All the elements of each system are lightweight, durable and focus on adding functionality to your VENICE. The Ultra Handles add multiple ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots, a ⅜”-16 bolt, and two 3mm location pins. Each non-slip extension includes Bocote hardwood inserts and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. All systems are a part of the Ultra Handle Collection and compatible with all Wooden Camera, ARRI, and third-party accessories. The Ultra Handle System is the ultimate setup that features 5” Handles, Front and Rear Upright, 3” Handle, 1” Extension, Right Angle Extension, and 24 color rings (six each in red, blue, green, and yellow) to place between components. The Sony Venice Ultra Handle Standard Kit focuses on the essentials for cinema shoots and includes a 5” Handle, 1” Extension, a Front and Rear Upright, as well as a Hex Wrench. The Ultra Handle 5” and 3" Kits include the 5” and 3” extensions respectively, as well as the 1” extension and the Front Upright for Sony VENICE. Included Items: A00103 | Ultra Handle System (Sony VENICE) 2 x Ultra Handle Extension (5") Ultra Handle Extension (3") Ultra Handle Extension (Right Angle) Ultra Handle Extension (1") Ultra Handle Front Upright (Sony VENICE) Ultra Handle Rear Upright (Sony VENICE) Ultra Handle Color Rings Pack (6x Red, 6x Blue, 6x Green, 6x Yellow) 3/16" T Handle Hex Wrench Specifications : Weight: 759 g (1.7 lbs) Dimensions: 400 x 50 x 147 mm (15.7 x 1.97 x 5.8 in) A00302 | Ultra Handle Standard Kit (Sony VENICE) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (Sony VENICE) Ultra Handle Rear Upright (Sony VENICE) 3/16" T Handle Hex Wrench Specifications: Weight: 474 g (1.04 lbs) Dimensions: 203 x 50 x 70 mm (8 x 2 x 2.8 in) A00303 | Ultra Handle 5" Kit (Sony VENICE) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (Sony VENICE) 3/16" T Handle Hex Wrench Specifications: Weight: 376 g (0.8 lbs) Dimensions: 178 x 50 x 70 mm (7 x 2 x 2.8 in) A00304 | Ultra Handle 3" Kit (Sony VENICE) Ultra Handle Extension (3") Ultra Handle Extension (1") Ultra Handle Front Upright (Sony VENICE) 3/16" T Handle Hex Wrench Specifications: Weight: 339.5 g (0.75 lbs) Dimensions: 127 x 50 x 70 mm (5 x 2 x 2.8 in)

These lightweight, simple, non-slip Extensions come in 5”, 4”, 3”, 2”, 1” and Right Angle options. Each extension includes a durable Bocote hardwood insert for comfort and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached ( Hex Wrench sold separately ). All variations add multiple ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots, and include one ⅜”-16 bolt, and two 3mm location pins. These extensions integrate seamlessly with other Ultra Handle products and are compatible with all Wooden Camera, ARRI, and third-party accessories. Specifications : Ultra Handle Extension (5"): Weight: 110.5g (0.24 lbs) | Dimensions: 136 x 30 x 30mm (1.42 x 1.18 x 1.18 in) Ultra Handle Extension (4"): Weight: 92.5 g (0.2 lbs) | Dimensions: 110 x 29 x 28 mm (4.3 in x 1.14 in x 1.10 in) Ultra Handle Extension (3"): Weight: 74g (0.16 lbs) | Dimensions: 85 x 30 x 30mm (3.35 x 1.18 x 1.18 in) Ultra Handle Extension (2"): Weight: 56.25 g (0.12 lbs) | 60 x 29 x 28 mm (2.4 x 1.14 x 1.10 in) Ultra Handle Extension (1"): Weight: 36.5g (0.08 lbs) | Dimensions: 34.5 x 30 x 30mm (1.36 x 1.18 x 1.18 in) Ultra Handle Extension (Right Angle): Weight: 90g (0.19 lbs) | Dimensions: 80 x 30 x 80mm (3.15 x 1.18 x 3.15 in)

The lightweight and modular Front or Rear Upright for the Sony VENICE camera system feature multiple ⅜”-16 and ¼”-20 tapped holes, one ⅜”-16 bolt, two 3mm location pins, and two ¼”-20 bolts. These Uprights integrate seamlessly with other Ultra Handle products and are compatible with all Wooden Camera, ARRI, and third-party accessories. Specifications: Ultra Handle Front Upright (Sony Venice): Weight: 83.5g (0.18 lbs) | Dimensions: 35 x 50 x 70mm (1.38 x 1.97 x 2.76 in) Ultra Handle Rear Upright (Sony Venice): Weight: 97g (0.21 lbs) | Dimensions: 35 x 50 x 70mm (1.38 x 1.97 x 2.76 in)

The lightweight and modular Universal Uprights add multiple ⅜”-16, two ¼”-20 tapped holes with anti-twist pin slots, a ⅜”-16 bolt for mounting and 3mm location pins. Each Universal Upright integrates seamlessly with other Ultra Handle products and is compatible with all Wooden Camera, ARRI, and third-party accessories. Specifications: Ultra Handle Front Upright (3/8"-16 Universal): Weight: 74g (0.16 lbs) | Dimensions: 50 x 30 x 70mm (1.97 x 1.18 x 2.76 in) Ultra Handle Rear Upright (3/8"-16 Universal): Weight: 74g (0.16 lbs) | Dimensions: 50 x 30 x 70mm (1.97 x 1.18 x 2.76 in)

Customize your handheld setup with these Grip Mount accessories. Each Top Grip Mount includes a cold shoe mount for adding accessories like mics to your side grip. When combined with extensions like the 5” and 4” Ultra Handle Extensions , users have a comfortable, lightweight side handle grip attachment for when they need a hand held option. Each Grip Mount includes a 3/8”-16 screw to mount this accessory to a Cage or Side Rail. Specifications: Ultra Handle Grip Mount (Top Left): Weight: 50.35 g (0.11 lbs) | 62 x 44 x 52 mm (2.09 x 0.94 x 2.05 in) Ultra Handle Grip Mount (Bottom Left): 28.80 g (0.06 lbs) | 53 x 37 x 36 mm (2.09 x 1.46 x 1.42 in) Ultra Handle Grip Mount (Top Right): Weight: 50.35 g (0.11 lbs) | 62 x 44 x 52 mm (2.09 x 0.94 x 2.05 in) Ultra Handle Grip Mount (Bottom Right): 28.80 g (0.06 lbs) | 53 x 37 x 36 mm (2.09 x 1.46 x 1.42 in)

24 color rings (six each in red, blue, green, and yellow) to place between components. Use to customize your setup and/or instantly identify A camera from B, C, and D cameras. Included Items: 6x Red Color Rings 6x Blue Color Rings 6x Green Color Rings 6x Yellow Color Rings Specifications: Weight: 12g (0.02 lbs) Dimensions: 79 x 28 x 28 mm (3.11 x 1.1 x 1.1 in)

Expand your handheld game by adding these Side Grips to your setup. Each lightweight grip includes a cold shoe mount at the top of the handle, allowing you to mount accessories like mics for compact shooting scenarios. The grips include ⅜”-16 and ¼”-20 mounting points on the outside of the grip to allow for mounting additional accessories. Specifications: Weight: 171.5 g (0.38 lbs) Dimensions: 119 x 61 x 61 mm (4.7 x 2.4 x 2.4 in)

Micro Battery Plate Adapter V-Mount to Gold Mount (RED® V-Raptor™), designed specifically for the RED V-RAPTOR and RED KOMODO-X, converts a V-Mount system to accept a Gold Mount battery. It is made from anodized aluminum which ensures both durability and secure battery mounting. A thicker construction is utilized to allow for full-sized cinema batteries to clear the connectors on the V-RAPTOR or KOMODO X camera. This power plate features 2x D-Taps for accessory power at battery voltage (11-17V) - supported by a resettable 3.8A digital E-Fuse. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. It is compatible with both micro and full-sized cinema batteries. Specifications: Weight: 242g (0.54 lbs) Dimensions: 75 x 30 x 108 mm (2.96 x 1.19 x 4.26 in)

A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance. Specifications: Weight: 325 g (0.7 lbs) Dimensions: 180 x 109 x 21 mm (7.09 x 4.29 x 0.83 in)

Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Full Accessory Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each Full Accessory Kit contains two versions of four plates, a cheese plate as well as a hook and loop plate in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position. Specifications: 214 g (0.5 lbs) | 180 x 110.5 x 16 mm (7.1 x 4.4 x 0.6 in)

The Rosette Standoff was designed to extend cameras like the Sony BURANO's built-in rosette past Side Rails or other obstructions, allowing users to maintain rosette functionality with the use of a Cage System or Side Rail. This useful hardware allows users to mount accessories like Remote Control Grips or handle extensions. This Standoff is ARRI Standard with a M6 Screw and utilizes a 4mm Hex to tighten. Included Items: 4mm Hex Key Specifications: Weight: 84.82 g (0.19 lbs) Dimensions: 32 x 24 x 32 mm (1.25 x 0.9 x 1.25 in)

The Universal 15mm Rod Clamp is a single rod clamp that attaches a 15mm rod to any 3/8"-16 mounting point and includes four anti-twist pins for maximum security. The design of this clamp includes extended sides, meaning less flex on higher loaded items like EVF’s. Included Items: 3/16” Hex Key Specifications: Weight: 34.34 g (0.08 lbs) Dimensions: 29 x 33 x 45 mm (1.1 x 1.3 x 1.75 in)

When using a 15mm rod, like the SONY PWX-FX9 Top Handle rod, this extension allows you to maneuver the EVF system along the built-in extensions rail. Complete with a safety pin to prevent EVF slippage, this extension can be used on multiple camera systems. Specifications: Weight: 29.26 g (0.06 lbs) Dimensions: 131 x 34 x 11 mm (5.2 x 0.9 x 0.4 in)

The Universal EVF Swivel Arm is a fresh approach to the EVF system . The swivel arm uses a 15mm rod mount and includes a built-in rail, allowing for the Universal EVF Accessory Rail Swivel Clamp to easily attach and slide into the correct user position. The swivel arm also includes a safety cap to prevent the rod from coming out of the clamp, when extending the rod to its preferred positioning. Specifications: Weight: 40.51 g (0.09 lbs) Dimensions: 93 x 88 x 20 mm (3.7 x 3.5 x 0.8 in)

The Universal EVF Accessory Rail Swivel Clamp was designed to open up the mounting options for the EVF on Sony BURANO. This clamp utilizes rail extensions for mounting the EVF in the best optical position. Users can also mount additional accessories via a mini rail clamp using Accessory Rails. Specifications: Weight: 109.32 g (0.24 lbs) Dimensions: 85 x 57 x 41 mm (3.5 x 2.25 x 1.6 in)

The D-Box link cables are designed to establish a connection between Wooden Camera D-Boxes like the D-Box® for Sony BURANO and D-Box to Venice 2 to break out boxes or p ower strips , so that communication and power can be transferred between the systems. These cables utilize an EXT port and are right-angle on one side and straight on the other. There are varying lengths of this cable ranging from 2in, 3.5in and 5.5in allowing the user to adjust the positioning of items like the B-Box (Sony BURANO) . Specifications 2 in: Weight: 3.57g (0.01 lbs) | Dimensions: 4.3 x 1.2 x 0.35 in (109.3 x 30 x 8.8 mm) 3.5 in: Weight: 3.67g (0.01 lbs) | Dimensions: 5.6 x 1.2 x 0.4 in (143 x 30 x 11 mm) 5.5 in: Weight: 4.99g (0.01 lbs) | Dimensions: 7.8 x 1.2 x 0.35 in (199 x 30 x 8.8 mm)

The Wooden Camera Bridge Plate Dovetail is a replacement base plate that can be attached to any tripod plate or ARRI standard bridge plate for quick release when using the LW 15mm Base Plate and ARCA Base Plate (RED® KOMODO-X™) . Specifications: Weight: 53.07g (0.12 lbs) Dimensions: 90 x 68 x 7 mm (3.5 x 2.7 x 0.3 in)

The Viewfinder Adaptor Bracket is compatible with the ARRI VMB-5 Viewfinder Mounting Set. This Adaptor Bracket provides a low-profile mounting solution to the top handle of the camera like the ⅜”-16 Universal Ultra Handle or accessories like the Universal Dual Rod Clamp for Bolt-On Accessories . This bracket is mounted using a ⅜”-16 screw and 3mm threaded mounting pins to maximize sturdiness. Additional mounting pins are stored within the bracket and can be used as support. Specifications: Weight: 73 g (0.16 lbs) Dimensions: 62 x 32 x 37 mm (2.4 x 1.25 x 1.5 in)

The ARCA Base Plate features an intuitive wedge-clamp locking system with a wing thumb-screw for added security. Comes with ⅜”-16 mounting points to attach the Bridge Plate. Specifications: Weight: 442 g (1 lbs) Dimensions: 175 x 130 x 22 mm (6.9 x 5.1 x 0.9 in)

Ideal standalone Top Plate segment for a minimalist rig. Supports LCS-1 handle, Ultra Handle, rod brackets and EVF viewfinder. Specifications: Weight: 143 g (0.31 lbs) Dimensions: 64.5 x 122 x 13 mm (2.54 x 4.8 x 0.12 in)

Expands the Front Top Plate, giving you extra mounting points and the ability to mount a CCH-5 handle and Dual Rod Bracket. Specifications: Weight: 173 g (0.38 lbs) Dimensions: 107 x 122 x 13 mm (4.21 x 4.8 x 0.51 in)