Optimize your Canon EOS C80 with an accessory system that compliments its design and adds features to efficiently build out your camera. This cage system for Canon C80 starts with an ARCA Base Plate and Riser that offers a base that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Two 12” 15mm rods and a Safety Dovetail are included to round out the foundation of your setup. The NATO Side Rail provides additional mounting points to the operator's side, connecting the Top and Riser plates, creating a robust, secure design that wraps around the camera. To cap off this Elite System is the 2-piece Top Plate that is secured to the top of the camera via a single ¼”-20 screw and through the hot shoe mount on the back of the camera. The design includes a removable back plate, if the user wants to use the hot shoe mount. This system also includes an Ultra Handle that allows users to securely hold on to your camera as well as adds mounting options for additional accessories. The power component of the Elite System is our Pro Gold Mount or V-Mount battery slides that provide external power to the Canon EOS C80. The Battery Slides feature 3x D-Tap ports for accessory power– including a digital fuse, which cuts off accessory outputs while leaving the camera powered. This battery plate can be attached to the Top Plate or Riser Plate by aligning the interlocking ridges and turning the thumbwheel to tighten a ¼”-20 screw. When mounted to the Top Plate, this system still allows access to the original battery compartment– enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Included Items: Battery Slide Pro Gold Mount/Battery Slide Pro V-Mount (Canon EOS C70/C80) Top Plate for Canon EOS C80 ARCA Riser Plate for Canon EOS C80 ARCA Base Plate for Canon EOS C80/C400 NATO Side Rail for Canon EOS C80 Ultra Handle Upright (Universal ⅜”-16) Ultra Handle 4” Extension Ultra Handle Extension 1” Safety Dovetail 8” 15mm Rod 12” (x2) Specifications: Elite Accessory System for Canon EOS C80 (Gold Mount): Weight: 1955 g (4.3 lbs) Dimensions: 135 x 175 x 110 mm (11.2 x 5 x 12.7 in) Elite Accessory System for Canon EOS C80 (V-Mount): Weight: 1955 g (4.3 lbs) Dimensions: 135 x 175 x 110 mm (11.2 x 5 x 12.7 in)

Our Core System was designed to provide users with the essentials of connectivity while providing a sturdy foundation for growing their build. This lightweight cage system for Canon C80 includes a Top Plate and Ridge Adapter, so users can make use of the native Canon EOS C80 handle. The foundation of this Core System includes an ARCA Base Plate and ARCA Riser that keep your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Included Items: ARCA Base Plate for Canon EOS C80/ C400 ARCA Riser Plate for Canon EOS C80 Top Plate for Canon EOS C80 Canon 1/4"-20 Ridge Plate (Dual 3/8"-16 Mount) Specifications: Weight: 789.3 g (1.7 lbs) Dimensions: 120 x 117.7 x 89.9 mm (4.7 x 4.6 x 3.5 in)

The Base Plate System includes an ARCA Base Plate and ARCA Riser that positions the camera at the appropriate optical height for mounting accessories and allows for quick setup transitions. The Riser Plate can be used alone with the ARCA Shoulder Plate or ARCA Steadicam Plate ; the Base Plate is required for tripod or dovetail systems. The ARCA Riser Plate includes a Lens Mount Adapter with an adjustable rail to distribute any strain from the lens mount to the camera body. This Adapter also prevents the shifting of accessories (like the RF to PL mount ) while adjusting lenses. Side-facing ¼”-20 mounting points let you keep accessories attached while transitioning between setups. The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a safety dovetail. This plate includes spacing to add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS) . Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8” , Unified Bridge Plate , or the Shoulder Rig V3 . Included Items: ARCA Riser Plate for Canon EOS C80 ARCA Base Plate for Canon EOS C80/ C400 Specifications: Weight: 535.2 g (1.18 lbs) Dimensions: 120 x 117.7 x 70.4 mm (4.7 x 4.6 x 2.8 in)

The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a dovetail. Optional 15mm rods in a lightweight spacing add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS) . Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8” , Unified Bridge Plate , or the Shoulder Rig V3 . A safety button prevents accidental release. (The ARCA Riser Plate for Canon EOS C400 or ARCA Riser Plate for Canon EOS C80 are required to attach the Base Plate to the camera and to maintain the proper height for studio baseplate and rod use.) Specifications: Weight: 327 g (0.7 lbs) Dimensions: 89 x 117.7 x 25.8 mm (3.5 x 4.6 x 1 in)

The ARCA Riser Plate mounts to the bottom of the Canon EOS C80, keeping the camera at the proper optical height when attached to the Base Plate. Included in the design is a Lens Adapter Support Rod to reduce the stress off the RF Mount. An adjustable slide rail allows you to adjust the position of the plate to accommodate your lens mount adapter (like our Canon RF to PL Mount Pro and RF to ARRI LPL Mount ). The back of the Riser Plate includes a mounting point for the Battery Slide Pro . 10x ¼”-20 mounting points along the bottom let you add accessories like the ARCA Shoulder Plate and Steadicam Plate without a Bridge Plate. (Base Plate required for tripod or bridge plate systems.) Specifications: Weight: 205.9 g (0.45 lbs) Dimensions: 120 x 105.3 x 44.6 mm (4.7 x 4.15 x 1.75 in)

The Top Plate for Canon EOS C80 features a 2-piece design to allow users to remove the section and use the hot shoe on the camera. This plate is securely mounted to the top of the camera using a ¼”-20 screw and includes tie-down ridges for added stability. When you are not using the hot shoe, the second piece of the top plate securely attaches to the camera using a cold shoe. On the rear of the Top Plate is a mounting point to attach a Battery Slide Pro , ridges on this point add stability by preventing the plate from twisting. The design includes a cut-out to keep the tape hook in its original place, but if you would like to remove it, the design also includes mounting options for the tape hook on the left or right side of the plate. Across the Top Plate and along the sides, are an abundance of mounting points to attach accessories. The two ⅜”-16 mounting points are symmetrical on the front and back, allowing you to attach a Top Plate Dual Rod Clamp and mount 15mm rod-based accessories to the top plate. Specifications: Weight: 233.1 g (0.51 lbs) Dimensions: 95.5 x 92 x 19.5 mm (3.8 x 3.6 x 0.8 in)

The NATO Side Rail for Canon EOS C80 allows you to add accessories along the side of the camera body. It securely attaches to the Top Plate and ARCA Riser for EOS C80 and incorporates a NATO Rail with our patented dual push pins for added safety. This allows you to mount accessories like the NATO Lock Ultra Arm (3”) or the Accessory Plate NATO Bracket to hold your monitors or accessory plates securely. ⅜”-16 and ¼”-20 mounting points run down the rail adding mounting points to the Operator’s side of the camera with a single forward-facing ⅜”-16 mounting point for accessories like Bolt-On Rods . A Tape Hook mounting point is also included on this Side Rail along with a removable HDMI safety clamp to support the connector on the camera. The design on the bottom of the rail allows the ARCA Riser to slide forward or backward depending on the mount being used, like the Canon RF to PL Mount Pro and Canon RF to ARRI LPL Mount Adapter . Specifications: Weight: 76.7 g (0.17 lbs) Dimensions: 162.7 x 37.7 x 26.2 mm (6.4 x 1.5 x 1 in)

Custom WC Gold Mount or V-Mount Pro battery plate for providing external power to the Canon EOS C70 and Canon EOS C80 cameras. Features 3x D-Tap ports for accessory power, including a digital fuse which cuts off accessory outputs while leaving the camera powered. Battery Slide Pro (Canon EOS C70/ C80) can be attached to any standard Canon Accessory Mount by aligning the interlocking ridges and turning the attachment thumbwheel to tighten a ¼”-20 screw; rods are not required. This system retains access to the original C70 battery compartment, enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Compatible with Canon EOS C70, Canon EOS C80, Wooden Camera Top Plate (Canon C70 ) , Wooden Camera Mini Top Handle (Canon C70) , Top Plate for Canon EOS C80 , ARCA Riser Plate for Canon EOS C80 , and more.

This Ridge Plate was specifically designed for users who would like to use our Top Plate with the native Canon EOS C80 Carry Handle. This Ridge Plate easily attaches to the Top Plate or any mounting location with ⅜”-16 screws featuring 1-inch spacing. Because the Ridge Plate can be mounted in any direction, it opens up the option to mount compatible accessories like the 5” Ultra Handle Kit or Monitor Hinges . Specifications: Weight: 20.59 g (0.5 lbs) Dimensions: 41.4 x 21.6 x 12.7 mm (1.6 x 0.85 x 0.5 in)

Canon RF to PL Mount Pro adapts PL lenses to Canon RF Mounts. Flange focus is set to match camera prior to shipping but shims are included should further adjustment be desired. This mount works with RED® cameras such as the V-Raptor™, KOMODO-X, KOMODO™ and Canon cameras such as the Canon EOS C70, C80 and C400. Tabs on PL collar allow for easy lock and unlock and 1/4-20 on mount base allows for lens support to be added like that on the LW 15mm Baseplate (RED® KOMODO™), ARCA Riser Plate for Canon EOS C80, or ARCA Riser Plate for Canon EOS C400. Includes: (3) Vertical lens support posts (Small, Medium, Large) Specifications: Weight: 240 g (0.53 lbs) Dimensions: 95.25 x 95.25 x 57.15 mm (3.75 x 3.75 x 2.25 in)

Canon RF Mount to ARRI LPL Mount Adapter allows ARRI LPL Signature Prime Lenses to be used with Canon RF Mount cameras - like the RED® V-RAPTOR™. Other LPL lenses like Leica Thalia LPL are also compatible. The 1/4-20 threaded hole on the bottom reduces strain on the camera mount by attaching to a tripod or the vertical lens support hole on the Unified DSLR Cage . LPL Cap included to prevent dust from entering sensor area when lens is not attached. A third tab is included for use with mount when not installed in a DSLR cage. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. ARRI's LPL to PL Adapter is also compatible, allowing easy change from standard PL lenses to LPL lenses. LPL Mount is passive and does not communicate lens data to the camera. Shim Set (stackable to achieve necessary thickness) Silver .0127mm (0.0005") Amber .0254mm (0.001") Purple .0381mm (0.0015") Red .0508mm (0.002") Green .0762mm (0.003") Tan .1016mm (0.004") Blue .127mm (0.005") Specifications: Weight: 216g (0.5 lbs) Dimensions: 81.8 x 81.8 x 46.5 mm (3.2 x 3.2 x 1.8 in)

Ultra Arm Ball (Cold Shoe) is a component of our Ultra Arm lineup which attaches to any camera hot shoe or accessory hot shoe mount and has a 25mm (1 inch) ball on the end. Ideal for use with DSLRs, Canon C-series cameras, Sony FS7/FS5, and many more. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 25.4 x 50.8 x 25.4 mm ( 1 x 2 x 1 in)

Adapts industry standard balanced XLR male plugs to mini-XLR balanced plugs (female). Highest quality professional grade connectors. Comes with a Bolt On 19mm Rod for attaching to any 1/4-20 threaded hole. A-Box (Mini-XLR) is compatible with cameras like the Canon C70, Canon C400, Blackmagic Pocket Cinema Camera 6K Pro, and RED® ONE cameras. Includes: (1) 1/4-20 x 3/8" screw 15mm Adapter Bushing Specifications: Weight: 224g (0.5 lbs) Dimensions: 96.7 x 40 x 38.5 mm (3.8 x 1.6 x 1.5 in)

Canon Accessory Rod Bracket provides 15mm LW pass-through support for top mounting compatible 15mm LW accessories. Can be attached to any standard Canon Accessory Mount ridges via (1) 1/4”-20 screw. Compatible with Canon C70 camera, Wooden Camera Top Plate (Canon C70 ) , Wooden Camera Mini Top Handle (Canon C70) , and more. Features: - 1/4”-20 holes - 3/8”-16 standard ARRI mounts - Canon Accessory Mounts Specifications: Weight: 62g (0.1 lbs) Dimensions: 120 x 250 x 250mm (4.7 x 9.8 x 9.8 in)

The D-tap to Canon EOS C70/ C80 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper voltage required by the camera. Cable length: 20 inches (508mm) Specifications: Weight: 90.72 g (0.2 lbs) Dimensions: 571.5 x 34.8 x 19 mm (22.5 x 1.37 x .75 in)

Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, silicon-molded magnet cable ties that give you an innovative, intuitive way to streamline your cable management, identify your runs, and personalize your setup. Available in 105mm and 175mm lengths with an integrated loop for attachment via a 1/4”-20 camera screw or directly to the cable itself to prevent misplacement. In addition, the silicon is stretchable allowing it to fit over cable connectors making sure they always travel with your cables on or off your setups. Select from 13 colors: yellow, red, green, blue, orange, teal, purple, pink, black, neon blue, neon green, neon orange, and neon pink. Specifications: Cine Mag Ties 105mm/4.1in: Weight: 21.68 g (0.05 lbs) | Dimensions: 105 x 18.1 x 21.5 mm (4.1 x 0.7 x 0.8 in) Cine Mag Ties 175mm/6.8in: Weight: 445.9 g (0.98 lbs) | Dimensions: 175 x 18.1 x 21.5 mm (6.9 x 0.7 x 0.8)

Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnetic strip at the top to hold small screws and tools when making adjustments to your build or project, a comfortable area to perform adjustments, and anti-slip material on the back to prevent the mat from moving on solid surfaces. Branded with all the Creative Solutions brands including Wooden Camera, SmallHD, and Teradek, this desk mat will help to keep your gear in place and define your work area. The comfortable cloth material allows you to keep your station scratch-free and allows your mouse to move freely in a large space. Specifications: Weight: 1300 g (2.9 lbs) Dimensions: 813 x 406.4 x 3.5 mm (32 x 16 x 0.14 in)

A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance. Specifications: Weight: 325 g (0.7 lbs) Dimensions: 180 x 109 x 21 mm (7.09 x 4.29 x 0.83 in)

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position. Specifications: 214 g (0.5 lbs) | 180 x 110.5 x 16 mm (7.1 x 4.4 x 0.6 in)

Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Full Accessory Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each Full Accessory Kit contains two versions of four plates, a cheese plate as well as a hook and loop plate in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

Customize your carrying style with any of the modular and ergonomic Ultra Handle Systems or Kits. Each offering features lightweight, durable, non-slip handles with Bocote hardwood inserts for comfort, and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. All handles add an array of ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots, one ⅜”-16 bolt, and two 3mm location pins. These Ultra Handle Systems and Kits are compatible with Wooden Camera, ARRI, and third-party accessories. The top-tier Ultra Handle System includes two 5” Handles, a Universal Front and Rear Upright, 3” Handle, 1” Extension, Right Angle Extension, as well as 24 color rings (six each in red, blue, green, and yellow) to place between components. The Standard Kit features one 5” Handle, a Universal Front and Rear Upright, 1” extension, and a Hex Wrench. The 5” and 3” Kits include a 5” and 3” extension, respectively, as well as a single Universal Upright, 1” Extension, and a Hex Wrench. Included Items: A00104 | Ultra Handle System (Universal 3/8"-16) 2 x Ultra Handle Extension (5") Ultra Handle Extension (3") Ultra Handle Extension (Right Angle) Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) Ultra Handle Color Rings Pack (6x Red, 6x Blue, 6x Green, 6x Yellow) 3/16" T Handle Hex Wrench Specifications: Weight: 759 g (1.7 lbs) Dimensions: 400 x 50 x 147 mm (15.7 x 1.97 x 5.8 in) A00426 | Ultra Handle Standard Kit (Universal 3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 474 g (1.04 lbs) Dimensions: 203 x 50 x 70 mm (8 x 2 x 2.8 in) A00338 | Ultra Handle 5" Kit (3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 376 g (0.8 lbs) Dimensions: 178 x 50 x 70 mm (7 x 2 x 2.8 in) A00337 | Ultra Handle 3" Kit (3/8"-16) Ultra Handle Extension (3") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 339.5 g (0.75 lbs) Dimensions: 127 x 50 x 70 mm (5 x 2 x 2.8 in)

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for shifting viewing angle. Upper attachment features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. Included 15mm mounting spud allows for upper attachment to be quick released and mounted onto any 15mm rod clamp. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors . Includes: 15mm Mounting Spud Specifications: Weight: 58g (0.1lbs) Dimensions: 27 x 39 x 51 mm (1 x 1 x 0.2 in)

Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. 15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ** Sold as single rods. If a pair of rods are required, add two to cart. ** Availab le in le ngths 3" (142200), 6" (142300), 9" (142400), 12 " (142500), 15" (142600), 18" (142700), 24" (142800) Weight: 3": 36g (0.08lb) 6": 72g (0.16lb) 9": 110g (0.24lb) 12": 152g (0.335lb) 15": 286g (0.63lb) 18": 350g (0.775lb) 24": 470g (1.04lb) Rod Standards Tutorial:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. 19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ** Sold as single rods. If a pair of rods are required, add two to cart. ** Available in lengths 3" (142900), 6" (143000), 9" (143100), 12" (143200), 15" (143300), 18" (143400), 24" (143500) Weight: 3": 50g (0.11lb) 6": 98g (0.215lb) 9": 148g (0.325lb) 12": 198g (0.435lb) 15": 384g (0.845lb) 18": 460g (1.02lb) 24": 622g (1.37lb) Rod Standards Tutorial:

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twisting and were designed with tool passthrough for secure mounting. The Bolt-On Rosettes come in either ⅜”-16 and ¼”-20 options. Included Items: 4mm Hex Key Specifications: 25mm Bolt-On Rosette (1/4"-20) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm (1 x 1 x 0.6 in) 25mm Bolt-On Rosette (3/8"-16) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm ( 1 x 1 x 0.6 in)

3/16" T Handle Hex Wrench features a high-quality alloy steel construction. Heat treated for optimum strength and ductility, the 3/16" T Handle Hex Wrench is finished to resist rust. Cushion grip features a vinyl surface for extra comfort. Specifications: Weight: 91g (0.2 lbs) Dimensions: 10.16 x 104.14 x 180.34 mm (0.4 x 4.1 x 7.1 in)

The 3/8"-16 Accessory Cube provides 5 sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two detachable locating pins are utilized to prevent twisting. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both Wooden Camera and ARRI-standard mounting points. Specifications: Weight: 30.5g (0.67 lbs) Dimensions: 25.4 x 25.4 x 25.4 mm (1 x 1 x 1 in)

Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount items like your focus MDR or Timecode Box to any camera rig using the variable options in this kit including two plates consisting of ⅜-16 screw mounts with locating pins, and a ¼-20 version. In addition to providing the maximum customization to your rig, our Hook and Loop Plate Kit provides a sleek and unobtrusive design featuring a matte black finish. Each Kit contains 3 Hook and Loop plates in the following increments: 4”x1.5” and 2 versions of 2”x2” plates. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Mini Hook and Loop Plate (3/8"-16) Bolt-On Small Hook and Loop Plate (3/8"-16) Bolt-On Mini Hook and Loop Plate (1/4"-20)

Add a new way to stash your timecode sync box or camera port caps in a secure and organized way to your camera builds. This plate includes soft side hook and loop directly incorporated on the plate in addition to a ⅜”-16 or ¼”-20 screws and locating pins to prevent any movement of the plate. The Bolt-On Hook-and-Loop Plate also offers a secure attachment anywhere on your camera build or mounting point. In addition to providing the maximum customization to your rig, our Bolt-On Hook and Loop Plate provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Available sizes for the ⅜”-16 come in mini and small. Available size for the ¼”-20 is a mini plate. Read the Accessory Plate blog to learn how each part of the system works together. Specifications: Bolt-On MIni Hook and Loop Plate (3/8"-16): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm (2.2 x 1.6 x 0.56 in) Bolt-On Small Hook and Loop Plate (3/8"-16): 41.4 g (0.09 lbs) | 105 x 40 x 14 mm (4.1 x 1.6 x 0.56 in) Bolt-On MIni Hook and Loop Plate (1/4"-20): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm

Cold Shoe Riser Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount raised 23mm vertically from the center of the 3/8"-16 screw. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 29.5g (.07 lbs) Dimensions: 28 x 25 x 27 mm (1.1 x 1 x 1.06 in)

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors , rosettes , handles , and other accessories to your camera rig using the rods’ locating pins that promise stability; never twisting, turning, or coming loose. In addition to bringing security and customization to your rig, our Dual Mount Bolt-On Rods are also sleek and unobtrusive, featuring a matte black finish. The Dual Mount Bolt On Rod can be mounted from one of two axes allowing the rods to extend from either the face or side of a rig - always keeping the rod parallel with the lens mount. Specifications: Dual Mount Bolt On Rod 15mm x 1.5” (3/8-16): 18 g (.04 lbs) | 64 x 20 x 20 mm (2.52 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 3” (3/8-16): 27.2 g (.06 lbs) | 102 x 20 x 20 mm (4.02 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 5” (3/8-16): 36.3 g (.08 lbs) | 153 x 20 x 20 mm (6.03 x .79 x .79 in)

Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Timecode Box, and Wireless Video TX to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Hook and Loop Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each System contains four Hook and Loop plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for leveling equipment. A single detachable locating pin is utilized to prevent twisting. The 3/8"-16 locating pin is compatible with any ARRI-standard mounting point. The 1/4"-20 locating pin is compatible with both Wooden Camera and ARRI-standard mounting points. Specifications: Weight: 14.6g (0.03 lbs) Dimensions: 34 x 23.3 x 19 mm (1.3 x .92 x 0.75 in)

Mini Offset Cold Shoe Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount offset 26.3mm horizontally from the center of the 3/8"-16 screw. The adjustable set pin can be moved to either side of the cold shoe for both left and right engagement. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 22.6g (.05 lbs) Dimensions: 50 x 26 x 8 mm (2 x 1.02 x .3 in)

The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 inches or 42.5mm apart center to center. The NATO ARRI Rail is a new version of our popular Safety NATO Rail which has a safety pin on one end and an ARRI accessory mount on the other which is great for adding our Microphone Shock Mount , Universal Offset Bracket , or other ARRI accessory devices. Great for attaching our new NATO Handle Plus v2 , RED®, and third-party NATO accessories. Includes: (2) 1/4-20 x 3/8" screws Specifications: Weight: 36g (0.08 lbs) Dimensions: 82.6 x 20.5 x 16.4 mm (3.25 x 0.8 x 0.6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Quick release clamp for Safety NATOs. Great for attaching monitors, handles, and more. Specifications: Weight: 50g (0.1 lbs) Dimensions: 47.2 x 47.2 x 18.3 mm (1.9 x 1.9 x 0.7 in)

The NATO Rail (¼”-20) was specifically designed to be a quick solution to mount SmallHD and Teradek accessories to your setup like an Ultra 7 or Bolt 6. Using NATO clamp items like the NATO Lock Ultra Arm , speeds up your build or tear-down time on those quick-moving production days. This rail allows users to install it to their accessory once and forget about it, users do not need to remove this rail to store their accessories. There are 2 sizes available, 50mm and 32mm, allowing users to determine the best length to offset their accessories. Retractable safety pins keep accessories secure, and a ¼”-20 mounting point ensures users can mount these rails to any build. Specifications: 50mm: Weight: 23.5 g (0.05 lbs) | Dimensions: 50 x 21 x 20 mm (2 x 0.8 x 0.8 in) 32mm: Weight: 18.6 g (0.04 lbs) | Dimensions: 32 x 21 x 20 mm (1.3 x 0.8 x 0.8 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. NATO Rosette (ARRI) combines the quick release functionality of NATO accessories with ARRI standard rosettes. Attaches to Safety NATO Rail, Safety Arm, Cage NATO Arm, or third party NATO standard device. Specifications: Weight: 72g (0.2 lbs) Dimensions: 33.9 x 48 x 28.2 mm (1.3 x 1.9 x 1.1 in)

Oconnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety latches allow for smoother camera installation. Provides 1/4-20 and 3/8-16 mounting points as well as mounting points for rack gear to be used on OConnor 120ex heads for driving heavy feature film payloads back and forth for accurate balancing. Also attaches to any tripod head via screws. Attaches natively to: OConnor 2560 OConnot 2575 OConnor 2060 OConnor 2065 OConnor 120EX Specifications: Weight: 758g (1.68 lbs) Dimensions: 365.76 x 95.25 x 25.4 mm (14.4 x 3.75 x 1 in)

Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The receiving ⅜”-16 and ¼”-20 screw mount designs allow for many Universal Accessories like our ¼”-20 Cold Shoe , or Bolt-On Accessory Rail Clamp and Universal Hinge and Clamp to allow for Accessory Plates to be used in conjunction with this offset. These brackets come in four lengths 1in, 1.5in, 2in., and 3in., allowing users to choose the offset bracket that fits the accessory that needs to be mounted. In addition to providing the maximum customization to your rig, our Offset Brackets provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Included Items: 3/16” Hex Key Read the Accessory Plate blog to learn how each part of the system works together. Specifications: 1in (28mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 50 x 21 x 10 mm (1.97 x 0.83 x 0.39 in) 1.5in (38.1mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 58.7 x 21 x 11.5 mm (2.3 x 0.83 x 0.45 in) 2in (50.8mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 34.11 g (.08 lbs) | 71.6 x 21 x 11.5 mm (2.8 x 0.83 x 0.45 in) 3in (76.2mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 46.27 g (.1 lbs) | 97.1 x 21 x 11.5 mm (3.8 x 0.83 x 0.45 in)

Quick Release Bridgeplate (15mm Studio) is an ARRI standard bridgeplate with 15mm studio offset spacing (rods spaced 100mm center to center). The new design allows the bridgeplate to drop down and lock on, anywhere along an ARRI standard dovetail. A safety catch adds security to the lever release function. Unlock the lever half way to slide on the dovetail or push the release button to allow the lever to move further and release the camera vertically. ARRI standard height makes it compatible with most camera rigs including those using our Unified Baseplates . Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. When combining this Bridgeplate with a RED® DSMC2™ or earlier RED® systems, the lens height will be approximately +3mm too tall. If you need to achieve the correct RED® lens height spacing, please choose our Unified Bridgeplate (15mm Studio) . QR Includes: (2) 3/8-16 screws Specifications: Weight: 420g (0.93 lbs) Dimensions: 101.6 x 152.4 x 31.75 mm (4 x 6 x 1.25 in)

Quick Release Bridgeplate (19mm) is an ARRI standard bridgeplate with 19mm rod openings. The new design allows the bridgeplate to drop down and lock on, anywhere along an ARRI standard dovetail. A safety catch adds security to the lever release function. Unlock the lever half way to slide on the dovetail or push the release button to allow the lever to move further and release the camera vertically. ARRI standard height makes it compatible with most camera rigs including those using our Unified Baseplates . Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings. When combining this Bridgeplate with a RED® DSMC2™ or earlier RED® systems, the lens height will be approximately +3mm too tall. If you need to achieve the correct RED® lens height spacing, please choose our Unified Bridgeplate (19mm) . QR Includes: (2) 3/8-16 screws Specifications: Weight: 420g (0.93 lbs) Dimensions: 101.6 x 152.4 x 31.75 mm (4 x 6 x 1.25 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes: Rosette Bracket 2x Rosette Handle (Brown Leather) 2x Rosette Arm Specifications: Weight: 1081g (2.4 lbs) Dimensions: 152.40 x 101.60 x 279.40 mm (6.0 x 4.0 x 11.0 in)

Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for leveling equipment. Specifications: Round Bubble Level (3/8"-16): 3g (0.007 lbs) 7.5 x 7.5 x 13 mm (0.3 x 0.3 x 0.52 in) Round Bubble Level (1/4"-20): 2g (0.004 lbs) 6.25 x 6.25 x 19 mm (0.25 x 0.25 x 0.25 in)

8" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. Attach to Shoulder Pad for custom handheld configurations Perfect for Manfrotto, Miller, Cartoni, and more. Specifications: Weight: 292g (0.6 lbs) Dimensions: 203.2 x 68.2 x 13.2 mm (8.0 x 2.7 x 0.5 in) Bridgeplates, Dovetails, & Dovetail Clamp Overview:

NATO standard, 70mm long, quick release rail attaches to any two 1/4-20 holes up to 42mm apart center to center and provides a mount for NATO Handles and NATO Clamps. Spring loaded pins on each end to prevent accidental accessory removal. Compatible RED® and third party NATO style accessories. Includes: (2) 1/4-20 x 3/8" screws Specifications: Weight: 33g (0.1 lbs) Dimensions: 70.4 x 20.5 x 16.4 mm (2.8 x 0.8 x 0.6 in)