IN STOCK Complete purchase by 3pm CST and order will ship same business day. Rosette Side Plate (URSA Mini, URSA Mini Pro / 12K) attaches to the right side of the Blackmagic URSA Mini and URSA Mini Pro /12K cameras by the ARRI rosette to add additional 1/4-20 and 3/8-16 mounting points. An ARRI standard rosette is available for attaching the handgrip or extension arm. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent). Specifications: Weight: 136 g (0.3 lbs) Dimensions: 101.6 x 101.6 x 25.4 mm ( 4 x 4 x 1 in) URSA Mini Side Plates:

Quick Release Plate Only for our Touch and Go system . Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to 1/3 lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Our Touch and Go System is compatible with: -120mm O'Connor Euro -Sachtler 35 -Ronford Baker RBQ Specifications: Weight: 118g (0.26 lbs) Dimensions: 114.3 x 77.47 x 6.6 mm (4.5x 3.05 x .26 in) Touch and Go System Overview:

Quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumb screws per side. ARRI standard M6 rosettes are located on both sides along with 1/4"-20 threaded holes. (1) 3/8"-16 ARRI accessory mount also available on camera-right side. Baseplate features upper ARCA Swiss standard dovetail with 3/8”-16 screw and locating pin for attaching to the bottom of the camera. Upper ARCA Swiss standard dovetail slides into the LW 15mm Baseplate core, and includes a push-pull safety release pin for removal. Also features vertical lens support post system. Lower dovetail slot is ARRI standard for attaching to compatible ARRI dovetails or the included Quick Dovetail. With Quick Dovetail attached, the baseplate and camera combination can be combined with an ARRI standard bridge plate like Quick Release Bridgeplate (19mm) or Quick Release Bridgeplate (15mm Studio) . Features: - Multiple 1/4”-20 Screw Holes - 2x ARRI Standard M6 Rosette - 1x 3/8 ”-16 ARRI Accessory Mount Specifications: Weight: 400g (0.8lbs) Dimensions: 90 x 120 x 40mm (3.54 x 4.72 x 1.5 in)

A wrap-around Right Grip with 3x ¼”-20 and 1x ⅜”-16 mounting points and a pass-through cutaway for effortless battery swaps. Specifications: 61 x 50.7 x 80 mm 0.09 lbs / 39.1 g Included Items: Right Angle Hex Keys

The LW 15mm Baseplate is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height compatible with Sony FX3, FX30, Fujifilm GFX100S, X-H2S, X-H2 and Panasonic GH6/GH7 cameras. 15mm rods pass through front to back and have two locking thumb screws per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. Baseplate features an updated ARCA safety system, as well as an updated ARRI standard safety dovetail system, a vertical lens support post system, and two standard 15mm LW rod clamps. Baseplate features an updated upper ARCA Swiss standard dovetail with two 3/8”-16 screws for attaching to the bottom of the camera. Updated for safety, the upper ARCA Swiss standard dovetail slides into the LW 15mm Baseplate core, and includes a safety release button for removal. Engraved arrows assist installing the dovetail in the correct direction. Lower dovetail slot is ARRI standard, for attaching to compatible ARRI dovetails or the included Quick Dovetail. The updated Quick Dovetail is now more user friendly; utilizing a new shape and locating pins, the Quick Dovetail can easily be installed at the same position every time. The offset bolt pattern allows for mounting to any bridge plate following the ARRI Standard bolt pattern and optical height. With Quick Dovetail attached, the baseplate and camera combination can be attached to an ARRI standard bridge plate like Quick Release Bridgeplate (19mm) or Quick Release Bridgeplate (15mm Studio) . Specifications: Weight: 348g (0.77 lbs) Dimensions: 50x118x90 mm (1.9x4.65x3.6 in)

Unified Baseplate (Sony FS5, VariCam LT, VariCam 35, Panasonic EVA1) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. On the sides, there are 1/4-20 holes and the ARRI standard accessory mount (3/8-16 threaded hole with locating pins adjacent). Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. An example of this would be the Sony FS5 using a Metabones Canon EF adapter. The upper dovetail would be positioned with the vertical 15mm rod opening to the front and the Unified Lens Adapter Support Kit would be installed and threaded into the Metabones support foot. The bottom of the baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) . To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails , Safety Dovetails , or Shoulder Rigs . For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate , providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head. Additional Unified Lower Quick Dovetails can be puchased to mount to gimbals, jibs, cranes, etc, making for quick and repeatable camera transitions. ** The Unified Baseplate is backwards compatible with our original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large) ** Includes: (2) 1/4-20 low profile screw (2) 3/8-16 low profile screw Specifications: Weight: 498.9 g (1.1 lbs) Dimensions: 50.8 x 152.4 x 152.4 mm ( 2 x 6 x 6 in) Unified Baseplate Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. MFT to PL Adapter (Pocket) is a micro four thirds lens mount adapter that enables mounting of all PL mount lenses onto the Blackmagic Design Pocket Cinema Camera. The Adapter includes a foot for attaching to a tripod directly eliminating strain on the camera. The foot can also attach directly to the Pocket Cage by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. This adapter will also work with any MFT camera like the BMCC MFT, GH3, AF100, etc. Features: - 1/4-20 foot for attaching tripod plate or support Includes: (2) M4x20mm socket cap screw Specifications: Weight: 241g (0.5 lbs) Dimensions: 83.6 x 81.5 x 52.6 mm (3.3 x 3.2 x 2.1 in)

Top Plate (Sony Venice) is a top cheeseplate for the Sony Venice, Venice 2 that contours to the shape of the camera body and leaves the USB port area open. Plate provides rows of 1/4-20 and 3/8-16 holes for attaching Handles, UVF Mount v2, Rod Clamps, and more. ARRI accessory mount also in several places (3/8-16 threaded hole with locating pins adjacent). Mounting holes available and marked for Master Top Handle and ARRI top handle (CCH-2) . Features: 1/4-20 holes - in standard spacing (9mm center to center) 3/8-16 holes - in ARRI standard spacing (50mm center to center) Includes: (4) 1/4-20 x 1/2 captured socket cap screws Specifications: Weight: 230g (0.50 lbs) Dimensions: 177.8 x 101.6 x 12.7 mm (7 x 4 x 0.5 in) Sony Venice, Venice 2 Accessory Overview:

LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K G2 / 6K Pro) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumb screws per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. Baseplate features an upper ARCA Swiss standard dovetail with 2x 3/8”-16 screw for attaching to the bottom of the camera. Upper ARCA Swiss standard dovetail slides into the LW 15mm Baseplate core, and includes a safety release button for removal. Engraved arrows assist installing the dovetail in the correct direction. Also features a vertical lens support post system. Lower dovetail slot is ARRI standard for attaching to compatible ARRI dovetails or the included Quick Dovetail. With Quick Dovetail attached, the baseplate and camera combination can be combined with an ARRI standard bridge plate like Quick Release Bridgeplate (19mm) or Quick Release Bridgeplate (15mm Studio) . Specifications: Weight: 369g (0.82 lbs) Dimensions: 90 x 118 x 32 mm (3.6 x 4.7 x 1.3 in)

Mini Touch and Go System is an industry standard, quick release system compatible with OConnor 80mm, Sachtler, and Ronford Baker. Our version is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Touch and Go System is compatible with: - 80mm O'Connor Euro - Sachtler 16 - Ronford Baker Mini-RBQ Complete System: Weight: 305g (.67 lbs) Dimensions: 139.7 x 76.2 x 16 mm (5.5 x 3 x .63 in) Touch and Go Plate Only: Weight: 53g (0.12 lbs) Dimensions: 79.5 x 63.5 x 6.35 mm (3.13 x 2.5 x .25 in) Touch and Go Receiver Only: Weight: 252g (0.56 lbs) Dimensions: 139.7 x 76.2 x 16 mm (5.5 x 3 x .63 in)

DISCONTINUED This item has been discontinued and is no longer stocked. Accessory L Bracket provides a mounting surface for recorders, wireless receivers, transmitters, battery plates, and much more. Attaches to any two 1/4-20 screw points up to 45mm center to center and also an option of 54mm center to center. Bracket provides holes for standard V-Mount plates (IDX, Switronix, etc) and QRC style Gold Mount plates (Anton Bauer, Switronix, etc). Includes: (2) 1/4-20 x 3/8" screws (2) 1/4-20 x 1/2" screws (4) 1/4-20 nuts Specifications: Weight: 132g (0.3 lbs) Dimensions: 137 x 80.3 x 3.4 mm (5.4 x 3.2 x 0.1 in)

Short Pass Through Top Plate (RED® DSMC2™) provides a 3pin trigger handle interface as well as arrays of 1/4-20 holes in RED® spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws and leaves the LCD pogo interface available for direct monitor or Adapter A attachment. Compatible with RED® DSMC2™ Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and other DSMC2™ cameras. Not compatible with RED® Raven. This product is great for adding mounting points to your DSMC2™ camera and allows for other cage and cable components like our Safety NATO Arm (RED® DSMC2™) and RED® Male Pogo to Female Pogo LCD/EVF Cables to be attached as well. Includes: (4) 1/4-20 x captured screws Specifications: Weight: 136.1 g (.3 lbs) Dimensions: 101.6 x 76.2 x 12.7 mm (4 x 3 x .5 in)

Mini Offset Cold Shoe Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount offset 26.3mm horizontally from the center of the 3/8"-16 screw. The adjustable set pin can be moved to either side of the cold shoe for both left and right engagement. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 22.6g (.05 lbs) Dimensions: 50 x 26 x 8 mm (2 x 1.02 x .3 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. 24 inch ARRI standard dovetail with safety catches on each end. Attaches natively to: O'Connor 2060 O'Connor 2575 O'Connor 120EX Sachtler Cine 30 Specifications: Weight: 1220g (2.7 lbs) Dimensions: 609.6 x 95.2 x 23 mm (24.0 x 3.7 x 0.9 in) Also attaches to any tripod head via screws. Review by Finner Knows Best Bridgeplates, Dovetails, & Dovetail Clamp Overview

Solid Baseplate (Sony Venice, F55, F5) is a fixed baseplate that provides pass-through lightweight 15mm rod support at the correct lens height along with ARRI standard rosettes on each side. The baseplate is also the correct thickness to bring the camera up to the correct lens height on ARRI standard bridge plates like our Unified Bridgeplate (19mm) and (15mm Studio) . Specifications: Weight: 410g (.9 lbs) Dimensions: 119.38 x 119.38 x 31.75 mm (4.75 x 4.75 x 1.25 in) Sony Venice, Venice 2 Accessory Overview: NAB 2018 New Products Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage (Large) is a quick release, height adjustable cage that fits larger DSLR cameras like Canon 1DC, 1DX, 1DX mkII, 1DmkIV, 1DmkIII, Nikon D4, D3x, D800 and many cameras with battery grips installed. The open shoe mount area allows for hot shoe accessories to be installed without obstruction. The minimalist design provides mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible. The cage includes a reversible top handle which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip! Cameras with fold-out LCD screens can be positioned easily and an included HDMI cable clamp can be mounted to the vertical rod to secure video cables and prevent port damage. The Unified DSLR Cage (Large) includes a height adjustable 15mm lightweight rod clamp for positioning 15mm rods at the correct distance to the center of the lens, ensuring compatibility with standard matteboxes and follow focus units. Features: 1/4"-20 holes - in standard spacing (9mm center to center) 3/8"-16 holes - includes ARRI style locating pins and Manfrotto locating slots Folding and reversible top handle Manfrotto dovetail receiver plate Rod Length: 194mm Camera Compatibility: DSLR Cameras 5" or taller Canon 1DC, 1DX, 1DXmkII, 1DmkIII, 1DmkIV, 1DXmkIII Nikon D4s, D4, D3x, D5, D800, D810, D850 DSLR Cameras with installed Battery Grip such as Sony Alpha series or Fujifilm X-H1 *Compatible with many additional cameras with battery grips installed Don't see your camera? Choose Small (DSLR Cameras up to 4" tall) or Medium (DSLR Cameras 4" to 5" tall) For the Nikon D800 / D810/ D850, to better match the form factor of the camera we recommend using the Unified DSLR Cage Vertical Rod (Medium) as well as the Unified DSLR 15mm Baseplate to ensure correct rod height if rod support is needed. Includes: (2) 1/4"-20 low profile screw S pecifications: Weight: 590g (1.3 lbs) Dimensions: 292.1 x 114.3 x 152.4 mm (11.5 x 4.5 x 6 in) Unified DSLR Cages and Baseplate:

Blackmagic Pocket Cinema Camera 6K G2 / 6K Pro Camera Cage is a feature-rich camera cage designed exclusively for the Blackmagic Pocket Cinema Camera 6K G2 and 6K Pro cameras. The cage wraps around three sides of the camera, leaving the handgrip exposed for accessibility. The custom cage design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. Two 3/8"-16 mounting points can be found on the front of the cage for adding top rod configurations. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The cage also features several pass-through slots for improved cable management, engraved markings to indicate the camera’s focal plane, and an offset cold shoe mount for adding on-camera lights, microphones, and more. Also included on the side of the cage is a detachable HDMI and USB-C Support Bracket for ensuring secure cable connections. If lightweight 15mm rod support is desired, the cage may be combined with our LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro / 6K Pro G2) to provide pass through rod support (sold separately). Included items: - Right Angle HDMI Adapter Specifications: Weight: 361g (.79 lbs) Dimensions: 103 x 143 x 142 mm (4.06 x 5.63 x 5.6 in)

MFT to PL Adapter Pro is a shimmable version of our popular micro four thirds lens mount adapter that enables mounting of PL mount lenses onto the MFT cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Pocket Cage or the Micro Cage by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. Features: - 1/4-20 foot for attaching tripod plate or support Shim Set (stackable to achieve necessary thickness) Silver .0127mm (0.0005") Amber .0254mm (0.001") Purple .0381mm (0.0015") Red .0508mm (0.002") Green .0762mm (0.003") Tan .1016mm (0.004") Blue .127mm (0.005") Compatibility : This adapter will also work with any MFT cameras like the below: Blackagic Pocket Cinema Camera 4k (BMPCC4K) Blackagic Micro Camera Panasonic GH2, GH3, GH4, GH5 Panasonic AF100 ...and many more!

Receiver Only for our Touch and Go system. Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to 1/3 lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Our Touch and Go System is compatible with: -120mm O'Connor Euro -Sachtler 35 -Ronford Baker RBQ Specifications: Weight: 390g (0.85 lbs) Dimensions: 184.2 x 91.44 x 19.05 mm (7.25 x 3.6 x .75 in) Touch and Go System Overview:

Unified Baseplate (Canon C300mkIII, C500mkII, C200, C200B, C700) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. On the sides, there are 1/4-20 holes and the ARRI standard accessory mount (3/8-16 threaded hole with locating pins adjacent). Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. The bottom of the baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) . To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails , Safety Dovetails , or Shoulder Rigs . For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate , providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head. Additional Unified Lower Quick Dovetails can be purchased to mount to gimbals, jibs, cranes, etc, making for quick and repeatable camera transitions. ** The Unified Baseplate is backwards compatible with our original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large) ** Includes: (2) 1/4-20 low profile screw (2) 3/8-16 low profile screw Specifications: Weight: 498.9 g (1.1 lbs) Dimensions: 50.8 x 152.4 x 152.4 mm ( 2 x 6 x 6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage Vertical Rod (Medium) is a component included with the Unified DSLR Cage (Medium) designed to achieve the required cage height for medium sized cameras like Canon 5DmkIV, 5DmkIII, 5DmkII, 7D, 6D, and Nikon D300, D600, D800. Great for shooters that want to use their Quick Cage (DSLR) with medium cameras but that may have already purchased the Unified DSLR Cage (Small) or Unified DSLR Cage (Large). Rod Length: 142mm Specifications: Weight: 38g (0.1 lbs) Dimensions: 142 x 15 x 15 mm Unified DSLR Cages and Baseplate:

A professional camera support system designed for the Sony FX3/FX30 camera. The FX3/FX30 Elite Accessory System includes: Cage; Cage Grip; Top Plate; Carry Handle Cheese Plate; Base Plate; 2x 9” Rods; 8” Safety Dovetail; D-Tap Dummy Battery; Micro Battery Slide (Gold Mount) , and Hex Keys. Included Items: Cage for Sony FX3/FX30 Top Plate for Sony FX3/FX30 Cage Right Grip for Sony FX3/FX30 Carry Handle Cheese Plate for Sony FX3/FX30 Micro Battery Plate Battery Slide LW 15mm Baseplate Safety Dovetail (8") D-Tap to Sony NP-FZ100 Battery (Dummy) 2 x 15mm Rod (9") Right Angle Hex Keys Specifications: K10022 | Accessory System for Sony FX3/FX30 (Gold Mount) Weight: 1479.3 g (3.2 lbs) Dimensions: 228 x 155.5 x 108 mm ( 9 x 6.1 x 4.25 in) K10023 | Accessory System for Sony FX3/FX30 (V-Mount) Weight: 1500.6 g (3.3 lbs) Dimensions: 228 x 155.5 x 102 mm ( 9 x 6.1 x 4 in)

Micro Touch and Go System is an industry standard, quick release system compatible with Sachtler FSB 10T, 8T, FSB 6T, and Touch and Go Plate S. Our version is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Our Touch and Go System is compatible with: - Sachtler FSB 10T - Sachtler 8T - Sachtler FSB 6T - Sachtler Touch and Go Plate S Complete System: Weight: 221 g (.49 lbs) Dimensions: 119.93 x 57 x 16.6 mm (4.73 x 2.25 x .65 in) Touch and Go Plate Only: Weight: 35 g (0.08 lbs) Dimensions: 57.15 x 47.5 x 6.35 mm (2.25 x 1.87 x .25 in) Touch and Go Receiver Only: Weight: 186 g (0.41 lbs) Dimensions: 119.93 x 57 x 16.6 mm (4.73 x 2.25 x .65 in)

Quick Release Plate Only for our Mini Touch and Go System . Mini Touch and Go System is an industry standard, quick release system compatible with OConnor 80mm, Sachtler 16, and Ronford Baker Mini RBQ. Our version is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Our Touch and Go System is compatible with: - 80mm O'Connor Euro - Sachtler 16 - Ronford Baker Mini-RBQ Specifications: Weight: 53g (0.12 lbs) Dimensions: 79.5 x 63.5 x 6.35 mm (3.13 x 2.5 x .25 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Lens Adapter Foot (1/4-20) attaches to the bottom of our all Wooden Camera MFT to PL Adapters and E-Mount to PL Adapters. Includes: (2) M3 x 12mm Phillips (2) M4 x 20mm socket cap Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 50.8 x 76.2 x 25.4 mm ( 2 x 3 x 1 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage Shoe Pincher Add-on provides hot shoe attachment functionality to any of our Unified DSLR Cages by creating a connection between the underside of the Unified DSLR Top Plate and DSLR hot shoe mount for a second point of contact and added security. Each of our Unified DSLR Cages offer two points in which to mount the Shoe Pincher Add-on, maximizing range for connecting to various cameras. SPECIFICATIONS: Weight: 45.35g (1.6 oz.) Dimensions: 60 x 50 x 15 mm (2.36 x 1.96 x .59 in) Unified DSLR Cages and Baseplate: Panasonic GH5 Install:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified Baseplate Camera Dovetail (Canon C300mkIII, C500mkII, C200, C200B, C700) is a plate which can attach to the base of those cameras and when combined with the Unified Baseplate Core Unit (No Dovetails) , provides 15mm lightweight rods at the correct lens height. The slotted design allows multiple included 1/4-20 and 3/8-16 screws to be attached to the camera bottom up to 70mm apart center to center and non-slip, rubber surface prevents the camera from twisting. The bottom portion of this Unified Camera Dovetail features an ARCA Swiss standard dovetail shape, our patented serrated dovetail design, and 1/4-20 threaded holes for attaching to gimbal mounts and other devices. Additionally the 15mm vertical rod opening can be combined with our Unified Lens Adapter Support Kit components to attach adapters like Wooden Camera, Metabones, etc. securely onto a camera body. Included: (2) 1/4-20 low profile screws (2) 3/8-16 low profile screws Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 101.6 x 127 x 25.4 mm (4 x 5 x 1 in) Unified Baseplate Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage (Small/Medium Cable Clamp Only) is a replacement cable clamp for securely holding the camera's HDMI cable in place while using the Unified DSLR Cage (Small) and Unified DSLR Cage (Medium).

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified Baseplate Core Unit (No Dovetails) is the central assembly in every Unified Baseplate. If the full assembly is desired, purchase the below versions instead: Unified Baseplate (Sony FS7, Canon C100mkII, C300mkII, C100, C300, C500) Unified Baseplate (URSA Mini, Sony F55, F5) Unified Baseplate (Alexa Mini) Unified Baseplate (Sony FS5, VariCam LT, VariCam 35) With the Core Unit, 15mm rods pass through front to back and have two locking thumbscrews per side. The top dovetail slot features a specialized ARCA Swiss shape which can attach to the below camera dovetails: Unified Baseplate Camera Dovetail (Sony FS7, Canon C100mkII, C300mkII, C100, C300, C500 ) Unified Baseplate Camera Dovetail (URSA Mini, Sony F55, F5) Unified Baseplate Camera Dovetail (Alexa Mini) Unified Baseplate Camera Dovetail (Sony FS5, VariCam LT, VariCam 35) The bottom of the baseplate has an integrated ARRI dovetail slot which attaches to the Unified Baseplate Lower Quick Dovetail but can also attach directly to any 2060 Dovetails , Safety Dovetails , or Shoulder Rigs . For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate , providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head. ** The Unified Baseplate is backwards compatible with our original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large) ** Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 101.6 x 127 x 25.4 mm (4 x 5 x 1 in) Unified Baseplate Overview:

A streamlined Cheese Plate that attaches directly to the stock FX3/FX30 carry handle to enhance configurability. Includes 7 x ¼”–20, 2 x ⅜”-16, and a cold shoe mounting point. Included Items: Right Angle Hex Keys Specifications: Weight: 52.2g (0.16 lbs) Dimensions: 80 x 45 x 26 mm (3.15 x 1.75 x 1 in)

L-Mount to PL Mount Pro (Panasonic and Leica) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto the Panasonic and Leica L-Mount cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Medium) by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. If you are using the L-Mount to PL Mount Pro (Panasonic and Leica) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Includes: (2) M4x20mm socket cap screw (1) 1/4-20 Support Foot (1) Universal Support Foot Shim Set (stackable to achieve necessary thickness) Silver .0127mm (0.0005") Amber .0254mm (0.001") Purple .0381mm (0.0015") Red .0508mm (0.002") Green .0762mm (0.003") Tan .1016mm (0.004") Blue .127mm (0.005") Specifications: Weight: 251g (0.6 lbs) Dimensions: 85.1 x 81.8 x 48 mm (3.4 x 3.2 x 1.9 in) Flange Focus Adjustment Procedure:

Unified Baseplate Camera Dovetail (Sony FX6, Rialto, URSA Mini, Mini Pro, Mini Pro 12K) is a plate which can attach to the base of those cameras and when combined with the Unified Baseplate Core Unit (No Dovetails) , provides 15mm lightweight rods at the correct lens height. The slotted design allows multiple included 1/4-20 and 3/8-16 screws to be attached to the camera bottom up to 70mm apart center to center and non-slip, rubber surface prevents the camera from twisting. The bottom portion of this Unified Camera Dovetail features an ARCA Swiss standard dovetail shape, our patented serrated dovetail design, and 1/4-20 threaded holes for attaching to gimbal mounts and other devices. Additionally the 15mm vertical rod opening can be combined with our Unified Lens Adapter Support Kit components to attach adapters like Wooden Camera, Metabones, etc. securely onto a camera body. Included: (2) 1/4-20 low profile screws (2) 3/8-16 low profile screws Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 152.4 x 76.2 x 25.4 mm (6 x 3 x 1 in) Unified Baseplate Overview:

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twisting and were designed with tool passthrough for secure mounting. The Bolt-On Rosettes come in either ⅜”-16 and ¼”-20 options. Included Items: 4mm Hex Key Specifications: 25mm Bolt-On Rosette (1/4"-20) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm (1 x 1 x 0.6 in) 25mm Bolt-On Rosette (3/8"-16) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm ( 1 x 1 x 0.6 in)

Kits A00310 | Baseplate System (Sony VENICE, VENICE 2) Low-profile and compatible with any make of bridge plate that uses ARRI Standard height, this ARCA Baseplate design keeps the center of gravity as low and spread out as possible, allowing you to easily add shoulder pads or other accessories while maintaining optimal stability. Lens-centered Front and Rear Rod Clamps allow you to use longer rods or mount additional accessories to the back of your rig. A double-locking system on the Rod Clamps provides incredible friction to prevent torque and rotation from your lens motors. Intuitive access holes allow you to convert to a Rialto 2 setup without removing the Baseplate. The Base Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security. Comes with ⅜”-16 mounting points to attach the Bridge Plate. Included Items: ARCA Baseplate (Sony VENICE, VENICE 2), and ARCA Base Plate Specifications : Weight: 759 g (1.7 lbs) Dimensions: 400 x 50 x 147 mm (15.7 x 1.97 x 5.8 in) A00306 | Baseplate System (Sony Rialto, Rialto 2) Lens-centered ARCA Baseplate (Sony Rialto, Rialto 2) and Base Plate with the same low-profile footprint and optical center as their VENICE 2 counterparts. Designed to integrate seamlessly with the VENICE 2 Baseplate, Riser, Rods, and Camera Dovetails while maintaining the same low-profile footprint and optical center. Included Items: ARCA Baseplate (Sony Rialto, Rialto 2), and ARCA Base Plate Specifications : Weight: 431.5 g (1 lbs) Dimensions: 100 x 116 x 32 mm (3.9 x 4.6 x 1.3 in) A La Carte A00275 | ARCA Baseplate (Sony VENICE, VENICE 2) The ARCA Baseplate keeps the center of gravity low, allowing you to add shoulder pads or other accessories while maintaining optimal stability. Lens-centered front and rear Rod Clamps ensure extra security and the ability to mount accessories to the back of your build. A high-friction, double-locking system on the rod clamps prevent torque and rotation from your lens motors. Intuitive access holes allow you to convert to a Rialto 2 setup without removing the Baseplate. The elegant cutout pattern is lightweight, but strong. Specifications: Weight: 442 g (1 lbs) Dimensions: 175 x 130 x 22 mm (6.9 x 5.1 x 0.9 in) A00276 | ARCA Baseplate (Sony Rialto, Rialto 2) Lens-centered and fully integrated with the VENICE 2 Baseplate. Easily detach and reattach while maintaining the same low-profile footprint and optical center. Specifications: Weight: 207 g (0.5 lbs) Dimensions: 54 x 130 x 22 mm (2.1 x 5.1 x 0.9 in)

Replacement ARCA-Swiss Dovetail for Sony FX3/FX30 Cage and Panasonic GH6/GH7 Cage . The lower ARCA-Swiss Wedge can be removed and attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. Specifications: Weight: 81g (.18 lbs) Dimensions: 87 x 38 x 22 mm (3.4 x 1.5 x 0.9in)

Fujifilm X-H2S / X-H2 Camera Cage is a feature-rich camera cage designed exclusively for the Fujifilm X-H2S and X-H2 cameras. This is a full wrap around, one-piece cage. The custom design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The lower Arca-Swiss Wedge found on the Arca-Swiss Dovetail can be removed and attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. The cage also features a detachable cable clamp, engraved markings to indicate the camera’s focal plane, location tabs to make sure the camera is square to the cage, and a hot shoe clamp for securing the camera into the cage. Features: - Location Tabs - Focal Plane Markings - Full Wrap-Around Cage - 1/4"-20 and 3/8"-16 Mounting Points with ARRI-Standard Location Pins Specifications: Weight: 219g (.48 lbs) Dimensions: 110 x 160.5 x 71.2 mm (4.3 x 6.3 x 2.8 in)

Canon RF to PL Adapter (Pro) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto cameras that utilize the Canon RF Mount - such as that on the RED® V-RAPTOR™ and Canon EOS series cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Small) by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. If you are using the Canon RF to PL Mount (Pro) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Includes: (2) M4x20mm socket cap screw (1) 1/4-20 Support Foot (1) Universal Support Foot Specifications: Weight: 251g (0.6 lbs) Dimensions: 85.1 x 81.8 x 48 mm (3.4 x 3.2 x 1.9 in) Flange Focus Adjustment Procedure:

Canon Accessory Rod Bracket provides 15mm LW pass-through support for top mounting compatible 15mm LW accessories. Can be attached to any standard Canon Accessory Mount ridges via (1) 1/4”-20 screw. Compatible with Canon C70 camera, Wooden Camera Top Plate (Canon C70 ) , Wooden Camera Mini Top Handle (Canon C70) , and more. Features: - 1/4”-20 holes - 3/8”-16 standard ARRI mounts - Canon Accessory Mounts Specifications: Weight: 62g (0.1 lbs) Dimensions: 120 x 250 x 250mm (4.7 x 9.8 x 9.8 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage (1/4-20 Mounting Screw Only) for installing camera onto the bottom bracket of the DSLR Cage.

The Symmetrical Left/Right Top Plates can be flipped and attached to either side of the EOS C400, providing additional ⅜”-16 and ¼”-20 mounting points for accessories like the NATO Side Rail, with or without the native top handle. Forward-facing ⅜”-16 mounting points allow accessories like Bolt-On Rods and Rod Clamps , and the Top Plate Dual Rod Clamp - Front can be attached when both plates are used and the native handle is detached. Note: users will need to remove the film plane tape hook and install it on the top plate so the left/ right plate is installed correctly if the user intends on using the tape hook. Specifications: Weight: 85.3 g (0.2 lbs) Dimensions: 120.8 x 44.2 x 19.2 mm (4.75 x 1.7 x 0.75 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage (Complete Screw Set Only) includes all screws used in the Unified DSLR Cage: 2x 1/4 screws 1x m3 thumb screw 1x m4x5 screw 2x m4x8 screws 2x m4x12 screws 1x m4x16 screws 1x 1/4-20x5/8 screw

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified DSLR Cage (Handle Grip Only) is a replacement wooden grip top handle for the Unified DSLR Cages.

Camera support package, compatible with Canon EOS C70 camera. Kit includes a top handle for handheld camera operation, top plate (cheese plate) for accessory attachments, 180-degree tilting hinge for mounting on-camera monitors, a quick-release baseplate system, and an 8” dovetail for easy slide-mounting on tripod heads. All accessories feature a variety of ¼”-20 holes, ⅜”-16 standard ARRI mounts, and standard Canon Accessory Mounts for a multitude of attachment options. Includes: Mini Top Handle (Canon C70) Top Plate (Canon C70) LW 15mm Baseplate (Canon C70) 15mm Rod (12in) 8” Safety Dovetail Specifications: Weight: 1202 g (2.65 lbs) Dimensions: 450 x 170 x 120 mm (17.7 x 6.6 x 4.7 in)

Kit A00215 | Faceplate Cage System (Sony VENICE, VENICE 2, Rialto, Rialto 2) The only Faceplate designed to integrate perfectly with existing sensor-block screw locations on the VENICE 2, allowing you to easily switch from camera mode to Rialto 2 Extension Mode while keeping your accessories attached. Features include DLC-coated stainless steel rosettes, a lens-centered Rod Clamp for use when the Base Plate is removed, configurable swing-out tape hooks, a dedicated rod-mounting point for lens control motors, EVF cable clips, and more. Included Items: Faceplate Cage (Sony VENICE, VENICE 2, Rialto, Rialto 2), and Faceplate Cage 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2) Specifications: Weight: 312 g (0.69 lbs) Dimensions: 46.5 x 170 x 180 mm (1.8 x 6.7 x 7.1 in) A La Carte A00296 | Faceplate Cage (Sony VENICE, VENICE 2, Rialto, Rialto 2) The only Faceplate that attaches directly to VENICE 2 using its existing sensor-block screws. DLC-coated stainless steel rosettes and an optional lens-centered Rod Clamp let you create a standalone rig that can be quickly removed from VENICE 2 for handheld, studio, and gimbal use. Mount everything to the Faceplate, and unlock the Top and Base Plates to slide off the camera, leaving an independent sensor cage with viewfinder and all accessories attached. Includes configurable swing-out tape hooks, a dedicated rod mounting point for lens control motors, EVF cable clips, and more. Specifications: Weight: 254 g (0.56 lbs) Dimensions: 130 x 170 x 152 mm (5.1 x 6.7 x 5.9 in) A00258 | Faceplate Cage 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2) The lens-centered 15mm Front Rod Clamp allows for lens support, lens control motors, or handheld grip use when the Baseplate is removed for gimbal or handheld configurations. Specifications: Weight: 254 g (0.56 lbs) Dimensions: 113 x 20 x 43.5 mm (4.4 x 0.8 x 1.7 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Top Plate (URSA Mini, URSA Mini Pro / 12K) is a top mounting cheese plate for Blackmagic URSA Mini and URSA Mini Pro / 12K cameras. Attaches to camera top by (4) 1/4-20 screws. Arrays of 1/4-20 holes in standard 9mm spacing and multiple 3/8-16 holes for large accessories. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent). Includes tape hook for accurate focus measuring. Original Blackmagic handle can be reinstalled on the Top Plate using center 1/4-20 threaded holes. Includes: (4) 1/4-20 socket cap screws Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 12.7 x 127 x 152.4 mm (0.5 x 5 x 6 in) Camera Configuration Guides: Blackmagic URSA Mini Camera Accessory Kit (Pro)

Blackmagic Pocket Cinema Camera 6K G2 / 6K Pro Unified Accessory Kit (Pro, Gold Mount) is a camera support package designed for the Blackmagic Pocket Cinema Camera 6K G2 and 6K Pro cameras. The BMPCC 6K Pro unified accessory package features our Blackmagic Pocket Cinema Camera 6K Pro Camera Cage - a form fitting camera cage for secure camera accessory attachment, the compact Top Handle (3/8-16) , LW 15mm Baseplate for BMPCC6K Pro - a quick release baseplate that holds two 15mm rods at the correct lens height, Safety Dovetail (12") which interfaces with the ARRI dovetail slot on the bottom of the LW 15mm Baseplate, two 15mm Rods (15”) , and the Micro Battery Slide Pro . Included items: - Top Handle (3/8-16) - Blackmagic Pocket Cinema Camera 6K Pro Camera Cage - LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro) - Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, Gold Mount) - 2x 15mm Rod (15") - Safety Dovetail (12") Specifications: Weight: 2267.96 g (5 lbs) Dimensions: 455 x 170 x 120 mm (17.7 x 6.6 x 4.7 in)

Blackmagic Pocket Cinema Camera 6K G2 / 6K Pro Unified Accessory Kit (Pro, V-Mount) is a camera support package designed for the Blackmagic Pocket Cinema Camera 6K G2 and 6K Pro cameras. The BMPCC 6K Pro unified accessory package features our Blackmagic Pocket Cinema Camera 6K Pro Camera Cage - a form fitting camera cage for secure camera accessory attachment, the compact Top Handle (3/8-16) , LW 15mm Baseplate for BMPCC6K Pro - a quick release baseplate that holds two 15mm rods at the correct lens height, Safety Dovetail (12") which interfaces with the ARRI dovetail slot on the bottom of the LW 15mm Baseplate, two 15mm Rods (15”) , and the Micro Battery Slide Pro . Included items: - Top Handle (3/8-16) - Blackmagic Pocket Cinema Camera 6K Pro Camera Cage - LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro) - Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, V-Mount) - 2x 15mm Rod (15") - Safety Dovetail (12") Specifications: Weight: 2267.96 g (5 lbs) Dimensions: 455 x 170 x 120 mm (17.7 x 6.6 x 4.7 in)