The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 inches or 42.5mm apart center to center. The NATO ARRI Rail is a new version of our popular Safety NATO Rail which has a safety pin on one end and an ARRI accessory mount on the other which is great for adding our Microphone Shock Mount , Universal Offset Bracket , or other ARRI accessory devices. Great for attaching our new NATO Handle Plus v2 , RED®, and third-party NATO accessories. Includes: (2) 1/4-20 x 3/8" screws Specifications: Weight: 36g (0.08 lbs) Dimensions: 82.6 x 20.5 x 16.4 mm (3.25 x 0.8 x 0.6 in)

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twisting and were designed with tool passthrough for secure mounting. The Bolt-On Rosettes come in either ⅜”-16 and ¼”-20 options. Included Items: 4mm Hex Key Specifications: 25mm Bolt-On Rosette (1/4"-20) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm (1 x 1 x 0.6 in) 25mm Bolt-On Rosette (3/8"-16) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm ( 1 x 1 x 0.6 in)

Oconnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety latches allow for smoother camera installation. Provides 1/4-20 and 3/8-16 mounting points as well as mounting points for rack gear to be used on OConnor 120ex heads for driving heavy feature film payloads back and forth for accurate balancing. Also attaches to any tripod head via screws. Attaches natively to: OConnor 2560 OConnot 2575 OConnor 2060 OConnor 2065 OConnor 120EX Specifications: Weight: 758g (1.68 lbs) Dimensions: 365.76 x 95.25 x 25.4 mm (14.4 x 3.75 x 1 in)

The Universal 19mm Rod Clamp is a single rod clamp that attaches a 19mm rod to any 1/4"-20 or 3/8"-16 mounting point. Three options in removable bases offer various mounting options with detachable locating pins. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both SmallHD (CS) and ARRI-standard mounting points. Clamps ratcheting thumb screws make tie-down adjustments easy to maneuver. The Universal 19mm Rod Clamp is compatible with Wooden Camera Bolt-On Accessory Rods and Kits for quick and easy accessory attachment. Specifications: Weight: 45.5g (0.1 lbs) Dimensions: 33 x 25 x 70 mm (1.3 x 0.06 x 2.75 in)

Cold Shoe Riser Bracket (3/8-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standard cold shoe mount raised 23mm vertically from the center of the 3/8"-16 screw. Great for mounting on-camera lights, microphone shock mounts, and more. Specifications: Weight: 29.5g (.07 lbs) Dimensions: 28 x 25 x 27 mm (1.1 x 1 x 1.06 in)

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position. Specifications: 214 g (0.5 lbs) | 180 x 110.5 x 16 mm (7.1 x 4.4 x 0.6 in)

Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In)

Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Full Accessory Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each Full Accessory Kit contains two versions of four plates, a cheese plate as well as a hook and loop plate in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance. Specifications: Weight: 325 g (0.7 lbs) Dimensions: 180 x 109 x 21 mm (7.09 x 4.29 x 0.83 in)

Zip Box Pro 4x5.65 (Complete Kit) is a lightweight and compact, clamp-on mattebox for various diameter lenses which can hold three 4x5.65 filters that are loaded from the front and held by a spring loaded latch. The included top flag is made of lightweight carbon fiber and covers the front of the mattebox which is great for protecting the lens between takes. The flag can be removed by loosening the top thumbscrew, aligning the tab with the key slot, and pulling out. Rear opening can be swapped by loosening the 4 thumbscrews and replacing with included clamp on backs featuring diameters of 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm. If swing away version is desired, the clamp on back can be replaced with the Zip Box Pro 4x5.65 (Swing Away Back Only). Includes: - Mattebox with 3x 4x5.65 filter stages - Clamp On 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, 80mm Backs - Top flag Specifications: Weight: 807.4g (1.78 lbs) Dimensions: 228.6 x 76.2 x 203.2 mm (9 x 3 x 8 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes: Rosette Bracket 2x Rosette Handle (Brown Leather) 2x Rosette Arm Specifications: Weight: 1081g (2.4 lbs) Dimensions: 152.40 x 101.60 x 279.40 mm (6.0 x 4.0 x 11.0 in)

Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Timecode Box, and Wireless Video TX to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Hook and Loop Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each System contains four Hook and Loop plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

Secure a Teradek Bolt 6 LT Transmitter in this Gold Mount Plus Dual Battery Plate Cradle and allow for pass-through power from the battery to the camera. This cradle has a voltage input range between 17.5 and 29V, with a maximum of 20A. Secure your Bolt 6 LT TX to the bottom of the cradle using an included captive ¼”-20 screw. Also compatible with Bolt 4K LT TX. This cradle requires a 2-pin cable to power the Bolt 6 LT TX/Bolt 4K LT TX. Specifications: Weight: 418 g (0.92 lbs) Dimensions: 74.6 x 81.7 x 119.4 mm (2.94 x 3.22 x 4.7 in)

The 12G-SDI Splitter (1x2) is a high-performance signal distribution device for broadcast, live production, and professional video applications. It accepts a single 12G-SDI input, supporting resolutions up to 2160p (4K UHD) with full 10-bit color depth and HDR metadata, ensuring pristine video quality. The signal is distributed to two independent 12G-SDI outputs without any loss or degradation. This splitter features a 2-pin 10-32V DC power input for seamless integration with camera batteries, AC power devices, and professional power distribution systems. The USB-C 5V power input enables operation with cameras and monitors that lack dedicated power options. Designed for zero-latency transmission, this splitter ensures smooth, uninterrupted video feeds, making it an essential tool for directors, DITs, and video engineers working in demanding production environments. Multiple 1/4"-20, 3/8"-16, and M2.5 threads offer flexible mounting options for ergonomic rig setups. Add accessories like NATO brackets , Bolt-On Adapters , Mini Rails , and Universal Hinges to build your perfect configuration. The kit option includes a high-powered USB 3.0 Type C Male 30-Watt AC Adapter. Specifications: 12G-SDI Splitter (1x2): Weight: 53.07 g (0.12 lbs) | Dimensions: 54 x 71.7 x 23 mm (2.13 x 2.82 x 2.82 in) 12G-SDI Splitter (1x2) Kit: Weight: 278.5 g (0.61 lbs) | Dimensions: 59 x 60.6 x 30.3 mm (2.3 x 2.4 x 1.2 in)