RED KOMODO-X & KOMODO Camera Accessories

Timecode In/Out Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a female, 5pin to right angle, RED EXT, 9pin. The connector exits toward the operato...

Control Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ CTRL is a Female 4pin 00 connector to a right angle, RED® EXT, 9pin. The connector exits toward...

3pin Fischer Trigger Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a Female 3pin Fischer wired in ARRI standard configuration to a right angle, RE...

Genlock Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a female BNC connector to a right angle, RED EXT, 9pin. The connector exits toward the opera...

Replacement Upper ARCA Dovetail for the LW15mm Baseplate (RED® KOMODO™) also compatible with KOMODO-X. Includes:(1) 1/4"-20 low profile screws(1) ...

RED® KOMODO™, KOMODO-X Revolva Riser provides clearance for the Wooden Camera RED® KOMODO™ Top Mount Kits to be utilized with the KipperTie Revolva...

OConnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety ...

A-Box (RED® V-Raptor™, KOMODO-X, ARRI ALEXA Mini) adapts one 5 pin connector to two balanced, 3 pin XLRs (female) with the highest quality, profess...

Micro Battery Plate Adapter V-Mount to Gold Mount (RED® V-Raptor™), designed specifically for the RED V-RAPTOR and RED KOMODO-X, converts a V-Mount...

Micro Battery Plate Adapter V-Mount to V-Mount (RED® V-Raptor™) allows users to attach full-sized V-Mount batteries to their RED V-RAPTOR and RED K...

Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for l...

Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for...

The Wooden Camera Bridge Plate Dovetail is a replacement base plate that can be attached to any tripod plate or ARRI standard bridge plate for quic...

Quick release clamp for Safety NATOs. Great for attaching monitors, handles, and more.Specifications:Weight: 50g (0.1 lbs)Dimensions: 47.2 x 47.2 x...

NATO standard, 70mm long, quick release rail attaches to any two 1/4-20 holes up to 42mm apart center to center and provides a mount for NATO Handl...

15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ** Sold as single rods. I...

GorillaGrip® by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than ...

GorillaGrip by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than st...

GorillaGrip® by Bondhus fold-up sets are compact, fitting easily into pockets or toolboxes. The GorillaGrip® fold-up handle is 40% stronger than ...

NATO Rosette (ARRI) combines the quick release functionality of NATO accessories with ARRI standard rosettes. Attaches to Safety NATO Rail, Safety ...

Universal Lens Support (19mm/15mm Studio) supports heavy lenses when using 19mm or 15mm studio rods. Convertible between both studio rod standards....

19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.** Sold as single rods. If...

Double sided velcro cable ties great for managing excess cable on set. Pack of 10 ties.Specifications:Weight: 90.7 g (0.2 lbs)Dimensions: 228.6 x 1...

Coiled HD-SDI - BNC to BNC cable. Extends from 10" resting length to 20" to allow mobility and adjusting of on board monitors, wireless systems, an...

Coiled HD-SDI – BNC to BNC cable. Extends from 20" resting length to 36" to allow mobility and adjusting of on-board monitors, wireless systems, an...

Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridg...

Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). New design...

Ultra Arm Ball (NATO Clamp) is a component of our Ultra Arm lineup which clamps to any quick release, NATO standard accessory rail and has a 25mm (...

Ultra Arm Ball (Cold Shoe) is a component of our Ultra Arm lineup which attaches to any camera hot shoe or accessory hot shoe mount and has a 25mm ...

UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simpl...

The V-Lock Base Station and Wedge Kit (ARRI Accessory Mount 3/8-16) is a quick release set based on the standard V-Lock or V-Dock as it is sometime...

Mini Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass-through slots on both the horizontal and vertical plates for attachin...

The Universal Ultra Arm is a strong articulating arm for attaching accessories to your camera or rig. It has two points of articulation so you can ...

Mini Offset Cold Shoe Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a ...

Cold Shoe Riser Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standa...

Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of yo...

Universal Lens Support (15mm LW) supports heavy lenses when using 15mm lightweight rods. Includes 1/4"-20 cap for attaching to tripod collars and ...

Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to ...

The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 i...

Wooden Camera Multi-Tool features an all metal construction and folds up into a compact form that easily fits into a pocket or toolbox. The Multi-T...

Zip Box Pro 4x5.65 (Complete Kit) is a lightweight and compact, clamp-on mattebox for various diameter lenses which can hold three 4x5.65 filters t...

Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to ...

Zip Box Pro 4x5.65 (Clamp On) is a lightweight and compact, clamp-on mattebox for up to 114mm diameter lenses which can hold three 4x5.65 filters t...

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors, rosettes, handles, and oth...

3/16" T Handle Hex Wrench features a high-quality alloy steel construction. Heat treated for optimum strength and ductility, the 3/16" T Handle Hex...

The 3/8"-16 Accessory Cube provides five sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two ...