New Releases (RED)

Take your compact camera setup to the next level by adding the Elite Accessory System for RED® KOMODO-X™. This top-tier system expands the reach of...

The Core Accessory System for RED® KOMODO-X™ is a lightweight approach to extending the camera's on-set capabilities. The system includes an ARCA B...

Expand your power options on the KOMODO-X™ by adding the D-Box® to your system, this D-Box converts from the camera’s native V-Mount to Gold Mount....

The Ultra Handle System is a modular, integrated system designed to adapt to any shooting style and camera build by adding or removing handle exten...

Expand your handheld game by adding Side Grips to your setup. These grips include cold shoe mounts at the top of each handle, allowing you to mount...

This system includes the D-Box®, B-Box, cables, and mounting options to attach the B-Box to the Rear Cage. The D-Box® offers hot swap abilities whe...

The ARCA Base Plate was designed for dual 15mm LW rods and allows for maintaining optimal lens height for studio-style builds. This Base Plate come...

The ARCA Riser incorporates an anti-twist block design built into the bottom of the camera. The Riser was intended for use with the ARCA Baseplate,...

The Top Cheese Plate securely mounts to the KOMODO® or KOMODO-X™ using two ¼”-20 screws with anti-twist pins and adds seven ¼”-20, anti-twist mount...

The Ultra Handle Upright for the RED® system has the appropriate ¼”-20 spacing for use with KOMODO-X™, KOMODO® and V-RAPTOR® cameras. This Upright...

These EXT Cables connect from the camera's EXT port to the B-Box for (KOMODO®, KOMODO-X™, V-RAPTOR®) directly, breaking out control options like Ti...

These EXT cables connect from the D-Box® for KOMODO-X™ to the B-Box (KOMODO®, KOMODO-X, V-RAPTOR®), allowing for EXT options like Timecode, Control...

There are three options in Mount Support for KOMODO-X™ between RF to LPL and RF to PL that are compatible with the ARCA Riser for KOMODO-X. Mount s...

The Side Rail - Left gives users mounting points on the left side of the KOMODO® or KOMODO-X™ as well as Sensor Plane markings. This rail offers fo...

This cable connects from the EXT port of the camera to the D-Box® for KOMODO-X™ system providing Run/Stop abilities to the 3-pin connector port.

Developed based on a direct request from a user, the Rigging Top Plate for RED® KOMODO-X™ expands the possibilities of adding accessories to the to...

The Ultra Handle Support Bracket is a lightweight, yet sturdy bracket designed to stabilize longer handle configurations and offset any flexing. T...

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...

The Side Rail - Right gives users mounting points on the right side of the KOMODO® and KOMODO-X™ as well as Sensor Plane markings. This rail offers...

Making use of the tie-in points at the top end of the camera's body, this Rear Cage - Right provides rear mounting points on the back and right sid...

The Rear Cage - Left is one piece of the Rear Cage, singled out for purchasing if you only need mounting points on the left rear side of the camera...

Our line of Bolt-On Accessory Plate Adapters were designed to mount accessories that have M2.5 threaded holes to your build, like the Accessory Pla...

The Ultra Handle Support Bracket helps stabilize longer handle configurations to prevent flexing while handle extensions are added to the camera sy...

The B-Box enhances the capabilities of the EXT port by offering multiple ports such as Run/Stop, timecode, control, and genlock. The B-Box has eigh...

The Ultra Handle 4” Kit comes with the Ultra Handle Upright for RED® DSMC3™, a 4” extension, and a 1” extension. The upright has a 3-pin connector ...

Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the...

Add ⅜”-16 and ¼”-20 mounting points on the sides of your build by attaching these sleek, lightweight Side Rails. These rails give users the flexibi...

Lens Mount Support for Canon RF to PL Mount Adapter Pro (RED® V-Raptor™) is a lens mount adapter support bracket designed for the Canon RF to PL Mo...

Lens Mount Support for Canon RF to PL Mount Adapter (RED® V-Raptor™) is a lens mount adapter support bracket designed for the Canon RF to PL Mount ...

Lens Mount Support for Canon RF Mount to ARRI LPL Mount (RED® V-Raptor™) is a lens mount adapter support bracket designed for the Canon RF Mount to...

RED® DSMC2™ EVF Mounting Plate with 1/4-20 and 3/8-16 ARRI Accessory Mount provides mounting points for the DSMC2™ RED® EVF (OLED) and attaches to ...

RED® KOMODO™, KOMODO-X Revolva Riser provides clearance for the Wooden Camera RED® KOMODO™ Top Mount Kits to be utilized with the KipperTie Revolva...

Replacement Upper ARCA Dovetail for the LW15mm Baseplate (RED® KOMODO™) also compatible with KOMODO-X. Includes:(1) 1/4"-20 low profile screws(1) ...

Canon RF to PL Mount Pro adapts PL lenses to Canon RF Mounts. Flange focus is set to match camera prior to shipping but shims are included should f...

B-Box (RED® KOMODO™) attaches to the camera-right BP-9 battery slot and provides a breakout for the camera’s EXT connector. Battery Slide Pro V-Mou...

Battery Slide Extension for Canon BP-955 Hot Swap for RED KOMODO-X & KOMODO allows either Battery Slide Pro V-Mount or Gold Mount (RED® KOMODO™...

Battery Slide Pro V-Mount (RED® KOMODO™) attaches to the camera-left, BP-9 battery slot and powers the camera using a right angle connector. Thumbs...

Top Mount Only for RED KOMODO-X & KOMODO is a Top Mount that attaches to the camera body using two captive 3/4" screws and provides a center AR...

LW15mm Baseplate (RED® KOMODO™, KOMODO-X) provides 15mm lightweight rod openings at the correct distance to the center of the lens. ARRI standard M...

The Revolva Pass Through Top Plate (DSMC2™) has all same features as our Pass Through Top Plate (RED® DSMC2™) and adds a small cut out on the front...