15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ** Sold as single rods. I...
View full details
19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.** Sold as single rods. If...
View full details
Sale
Zip Box Double 4x5.65 holds two 4x.5.64" (100x114mm) filters and clamps on the the front of the lens. Available in four sizes, 80-85mm, 90-95mm, 10...
View full details
Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). New design...
View full details
Sale
24V Power Supply (ARRI Amira / ALEXA Mini / Mini LF / ALEXA 35) is an ALEXA Mini / Mini LF cable for ARRI Amira, ALEXA Mini, ALEXA Mini LF and ALEX...
View full details
12 inch ARRI-standard dovetail with safety catches on each end. Attaches natively to: O'Connor 2060 O'Connor 2575 O'Connor 120EX Sachtler Cine 30 ...
View full details
D-Tap to 2-pin Cable (18") has a standard D-Tap on one end and a 0B, 2-pin connector on the other. Cable is wired in an ARRI standard configuration...
View full details
A-Box (ALEXA Mini LF, ALEXA 35) adapts one 6pin connector to two balanced, 3 pin XLRs (female) with the highest quality, professional grade connect...
View full details
D-Tap to 2-pin Cable (12") has a standard D-Tap on one end and a 0B, 2-pin connector on the other. Cable is wired in an ARRI standard configuration...
View full details
Unified VCT Wedge Plate is a Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates. The reduced-height ARRI dovetai...
View full details
2-pin to 2-pin Cable (18") is a 0B, 2-pin cable that is wired in an ARRI standard configuration with a 18 inch cable length.
2-pin to 2-pin Power Cable (12") is a 0B, 2-pin cable that is wired in an ARRI standard configuration with a 12 inch cable length.
4 pin XLR male connector to 4 pin XLR female. Power rated connectors and cable. Ideal for use with block batteries and camera 4pin XLR adapter cabl...
View full details
Sold out
Master Top Handle (ARRI Accessory Mount End Cap) is installed into the 15mm opening on rear portion of the Master Top Handle and is clamped down us...
View full details
18 inch ARRI standard dovetail with safety catches on each end.Attaches natively to:O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30Specifi...
View full details
3pin XLR to Alexa Mini / Mini LF / Alexa 35 (Straight, 120") is an 8pin Alexa Mini cable which is great for powering the camera off a 24V block bat...
View full details
Quick Release Bridgeplate (19mm) is an ARRI standard bridgeplate with 19mm rod openings. The design allows the bridgeplate to drop down and lock on...
View full details
18" ARRI standard dovetail with stopper screw on one end and safety latch on the other to prevent accidental camera removal. Arca Swiss standard do...
View full details
Replacement LPL Mount Cap for any ARRI standard LPL mount including ARRI LPL Mount for RED® DSMC2™ Cameras Specifications:Weight: 36g (0.1 lbs)Dime...
View full details
24 inch ARRI standard dovetail with safety catches on each end.Attaches natively to:O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30Specifi...
View full details
UVF Mount (ARRI Rosette, Adapter Only) includes only the item that adapts the Zacuto Gratical, F&V SpectraHD 4 EVF, or any other EVF/LCD based ...
View full details
A-Box ALEXA Mini - Flying Lead Replacement is a replacement cable for our A-Box (ALEXA Mini). Wiring should be done by electrical engineer and trip...
View full details
Quick Release Bridgeplate (15mm Studio) is an ARRI standard bridgeplate with 15mm studio offset spacing (rods spaced 100mm center to center). The n...
View full details
The AIR EVF Mount (19mm Tube Clamp Under 15mm LW Rods) slides on to any 15mm rods with standard light weight spacing and puts our AIR EVF Mount (RE...
View full details
