Universal Accessories

Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, sili...

Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for...

Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for l...

The 3/8"-16 Accessory Cube provides five sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two ...

This camera shoulder strap kit features a 1.5" wide, extra-long adjustable sling (47"-80") with double-end elastic cords and four thumb buckles for...

Meet the 15mm Maxi Rod Light, a product that resulted from a collaboration with a member of our community. This small rod light was designed specif...

Camera Strap System for Quick Detach and Release The Quick Disconnect Kits introduce a secure way to carry gear and an easy way to swap out rigs, s...

Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnet...

Customize your rig with Wooden Camera’s Accessory Plates. Securely mount items like your focus MDR, Accessory Cube, WC Battery Plates, and more to ...

Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The recei...

The 1/4”-20 Accessory Cube provides 5 sides of ¼”-20 mounting points for adding accessories to your build and comes in a 1/4"-20 or 3/8"-16 screw a...

Professional 4K signal splitter with reclocking, dual power inputs, and flexible mounting. The 4K 12G-SDI Distribution Amplifier is a high-performa...

This extra-long, adjustable camera sling, measuring 1.5" wide and extending from 47" to 80", features double-end elastic cords and four thumb buckl...

This camera shoulder pad with high-quality foam and breathable mesh reduces shoulder strain. Measuring 9.5 x 2.5 inches, it fits most 1.25-inch str...

The QD Swing Swivel has a triangle design and quick-disconnect swivel for easy, one-handed sling attachment and 360° rotation, enhancing sling cont...

Add or replace Gold Mount Studs for your setup with this 3-pack kit. The Kit includes 10mm M3 Phillips Head screws and Gold Mount Studs. By attachi...

The Bolt-On Monitor Hinge Cube was designed to securely mount monitors to the items via ¼”-20 mounting points. Using the dual Rosettes design, the ...

The NATO Rail (¼”-20) was specifically designed to be a quick solution to mount SmallHD and Teradek accessories to your setup like an Ultra 7 or Bo...

Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rai...

Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. S...

Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a h...

Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount it...

Customize your Accessory Plate setup with three movable Mini Accessory Rails. Compatible with the Bolt-On Accessory Rail clamp and Universal Access...

Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Terade...

The Accessory Plate NATO Bracket (Right Angle) allows users to attach Wooden Camera BURANO and KOMODO-X B-Boxes directly to 3rd party NATO side rai...

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...

Tilting hinge for mounting on-camera monitors to Canon EOS C70. Designed with a 180-degree tilt for shifting viewing angle. The lower mount feature...

Replacement Hinge Arm that allows you to mount any of SmallHD’s Smart 5 monitors on the opposite side of the pivot that is included with the Monito...

Our line of Bolt-On Accessory Plate Adapters were designed to mount accessories that have M2.5 threaded holes to your build, like the Accessory Pla...

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...

Specialized heat and shock protection for your Teradek Bolt 6 LT TX. The cage features a fiberglass-injected nylon plastic construction - ensuring...

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...

Tilting hinge for mounting on-camera monitors to Canon EOS C70. Designed with a 180-degree tilt for shifting viewing angle. The lower thumbwheel fe...

Mini Monitor Hinge (Canon C300mkIII, C400, C500mkII) attaches the Canon LCD to the camera body or top handle via a captured ¼”-20 screw with a gro...

Monitor Hinge (ARCA Swiss) can attach into ARCA slot like the one found on a Top mount, which is sold separately. When combined with Top Mount, sys...

SmallHD 1/4"-20 to 3/8"-16 ARRI Accessory Mount Adapter attaches to SmallHD monitors, providing an offset ARRI 3/8"-16 accessory mount for attachin...

Further customize your rig with Wooden Camera’s Bolt-On Accessory Rods. Securely mount remote lens motors, rosettes, handles, and other accessories...

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors, rosettes, handles, and oth...

Customize your rig with Wooden Camera’s Bolt-On Rod Accessory Kits, bundling the rods you need. Securely mount remote lens motors, rosettes, handle...

Compact mounting bracket designed for the Teradek Bolt 6 LT TX to integrate seamlessly onto your camera via one captive 1/4"-20 screw in up to six ...

Streamlined and versatile bracket designed for mounting the Teradek Bolt 6 LT TX in up to six different positions via a single captive 1/4"-20 scre...

Offset Mount and V-Lock Kit for Bolt 6 LT TX is a comprehensive kit that features a versatile mounting bracket for the Teradek Bolt 6 LT TX and a q...

Cold Shoe Riser Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a standa...

Mini Offset Cold Shoe Bracket (3/8"-16) attaches to any 3/8"-16 mounting point and features removable locating pins for added security. Provides a ...

Wooden Camera LCD Sun Shade (4-5") attaches quickly using elastic straps to monitors 4 to 5 inches (measured diagonally) which is perfect for the R...

Wooden Camera LCD Sun Shade (6-7") attaches quickly using elastic straps to monitors 6 to 7 inches (measured diagonally) which is perfect for the R...

V-Lock Base Station and Wedge Kit is a quick release set based on the standard V-Lock or V-Dock as it is sometimes referred. The Base Station porti...