Replacement Parts

1/4"-20 Screw replacement for Shoulder Rigs

2060 Dovetail Lever, Spring, Set Screw for 2060 Dovetail assembly.

The complete set of Swing Away Reduction Rings that come with our Zip Box Pro (Swing Away). Includes Reduction Rings in the Following Sizes: 110mm,...

Unified VCT Shoulder Foam Only is a replacement shoulder foam pad for the Unified VCT Wedge Plate. Includes velcro strips for attachment.

NATO Rail that attaches to the right side of the main mattebox shell and the side of the rear metal structure. Includes two M5 low profile socket c...

Replacement shell for FGJ 1B connector used with RED® Epic and Scarlet power input. Useful if someone stepped on your power cable.

Pin, Spring, and Socket Set Screw from Safety NATO and Safety Arm.

DISCONTINUED This item has been discontinued and is no longer stocked. Arca Swiss based shoulder pad that will attach to an Arca Swiss dovetail sha...

Hard Stop Knob for the Hard Stop Bit on the UFF-1 Universal Follow Focus and Zip Focus. Specifications:Weight: 4g (0.01 lbs)Dimensions: 6.35 x 6.35...

Single replacement Director's Monitor Cage v3 (Handle Bracket Only). The bracket clamps to the Director's Monitor Cage v3 (Carbon Fiber Grip Only) ...

Director's Monitor Cage v3 (Rod Only) is a single 6.5" long 15mm rod used to connect the Director's Monitor Cage v3 (Top Bracket Only) and Director...

Zip Box Pro 4x5.65 (Top Flag Only) is a replacement top flag for the Zip Box Pro 4x5.65 (Clamp On) and Zip Box Pro 4x5.65 (Swing Away) Specificatio...

Replacement Shaft, Pin, Spring for LW 15mm Baseplate (Canon C70). Includes: (1) Baseplate Shaft (1) Pin (1) SpringSpecifications: Weight: 4g (0.00...

Replacement 3/8"-16 Slider with Locating Pin for the Upper ARCA Dovetail (Canon C70) and LW 15mm Baseplate (Canon C70). Specifications:Weight: 16 ...

Universal Ultra Arm Knob (3/8-16) is a replacement knob for the Universal Ultra Arm Ball (Combo 1/4-20 & 3/8-16).

Director's Monitor Cage v2 (Handle Assembly) is a replacement handle and bracket for the Director's Monitor Cage v2. Specifications: Weight: 140g (...

Unified DSLR Cage (Lens Adapter Support Bracket Only) attaches beneath the Unified DSLR Cage providing support for Wooden Camera lens adapters or M...

Replacement Medium 15mm post for Universal Baseplate. 1/4"-20 x 1/4" socket cap screw included.

Unified DSLR Cage Vertical Rod (Small) is a component included with the Unified DSLR Cage (Small) and accommodates smaller cameras like Sony A7s, A...

C-Stand Locking Screw for the Director's Monitor Cage v2. Specifications:Weight: 181.4 g (.5 lbs)Dimensions: 12.7 x 177.8 x 177.8 mm (0.5 x 7.5 x 7...

Replacement power cable for Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, V-Mount) and Micro Battery Slide Pro (Blackmagic Pocke...

Replacement PL Lens Mount Tabs includes 2 replacement tabs for the Canon RF to PL Mount Pro (RED® KOMODO™), PL Mount Modification Kit (Blackmagic P...

Unified DSLR Cage (Handle Pivot Piece Only) is a replacement part for the Unified DSLR Cage to attach the Unified DSLR Cage (Handle Assembly Only)....

Unified Baseplate (Arca Wedge and Spring Set Only) is a replacement part for our Unified Baseplates. This set is included in the below baseplates a...

Replacement screw set for UMB-1 Studio Adapters. Includes 1/4"-20 captured screws, 3/8"-16 captured screw, and two locating pins.

3/8"-16 knurled knob.Specifications:Weight: 8g (0.0 lbs)Dimensions: 15 x 14.5 x 14.5 mm (0.6 x 0.6 x 0.6 in)

Replacement Large 15mm post for Universal Baseplate. 1/4"-20 x 1/4" socket cap screw included.

Replacement 1/4"-20 flat head screws for Panasonic BGH1 Camera Cage.

D-Box® SONY VENICE, VENICE 2 Replacement Power Strip Only is a replacement part for our SONY VENICE, VENICE 2 D-Box® and requires the full D-Box® u...

UMB-1 Left Side Small Support Arm (3 Stage) attaches to the left side of the main mattebox. The support arm is a replacement part for UMB-1 Left Si...

Replacement end cap for 19mm AIR EVF Mount rod. Specifications:Weight: 282g (0.2 lbs)Dimensions: 25.4 x 25.4 x 12.2 mm (1 x 1 x 0.5 in)

Replacement M4 Thumbscrew Knob for AIR EVF Mounts and AIR EVF Extensions. Specifications:Weight: 282g (0.2 lbs)Dimensions: 25.4 x 25.4 x 12.2 mm (1...

The Main Rod for the Director's Monitor Cage v2 is a 6" long 15mm rod used to connect the Director's Monitor Cage v2 (Top Bracket Only) and Directo...

Replacement screws for our Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Includes: (2) 1/4-20 x 1/4" screws (2) 1/4-20 x 3/4...

Replacement badge for the side of the UMB-1 main plastic shell.Specifications:Dimensions: 28.2 x 6.3 x 20.6 mm (1.1 x 0.2 x 1 in)

Lanyard from Director's Monitor Cage.