Canon C300mkII Accessory Kits

The Canon C300mkII PL Modification Kit allows users to convert their Canon C300mkII camera to PL Mount through a short modification process. All ne...

D-Tap to Canon C200, C200B, C300mkII (Braided Flex Cable) allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug....

15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ** Sold as single rods. I...

Coiled HD-SDI - BNC to BNC cable. Extends from 10" resting length to 20" to allow mobility and adjusting of on board monitors, wireless systems, an...

Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, sili...

19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.** Sold as single rods. If...

Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for...

8" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mountin...

The Universal Ultra Arm is a strong articulating arm for attaching accessories to your camera or rig. It has two points of articulation so you can ...

Universal Lens Support (19mm/15mm Studio) supports heavy lenses when using 19mm or 15mm studio rods. Convertible between both studio rod standards....

Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for l...

The 3/8"-16 Accessory Cube provides five sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two ...

Ultra Arm Ball (NATO Clamp) is a component of our Ultra Arm lineup which clamps to any quick release, NATO standard accessory rail and has a 25mm (...

Coiled HD-SDI – BNC to BNC cable. Extends from 20" resting length to 36" to allow mobility and adjusting of on-board monitors, wireless systems, an...

Mini Vertical Camera Bracket has 1/4"-20 and 3/8"-16 threaded holes plus pass-through slots on both the horizontal and vertical plates for attachin...

Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridg...

Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). New design...

Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The recei...

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors, rosettes, handles, and oth...

Universal Lens Support (15mm LW) supports heavy lenses when using 15mm lightweight rods. Includes 1/4"-20 cap for attaching to tripod collars and ...

The V-Lock Base Station and Wedge Kit (ARRI Accessory Mount 3/8-16) is a quick release set based on the standard V-Lock or V-Dock as it is sometime...

Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnet...

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for s...