RED Komodo-X

8" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mountin...

Dovetail Clamp adapts any camera system, baseplate, or accessory to an ARRI standard dovetail. Great for use with our Fixed Bases, Quick Bases, Uni...

12" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounti...

LW15mm Baseplate (RED® KOMODO™, KOMODO-X) provides 15mm lightweight rod openings at the correct distance to the center of the lens. ARRI standard M...

12 inch ARRI standard dovetail with safety catches on each end. Attaches natively to: O'Connor 2060 O'Connor 2575 O'Connor 120EX Sachtler Cine 30 A...

Monitor Hinge Only for RED KOMODO-X & KOMODO can attach into ARCA slot like the one found on Top Mount Only (RED® KOMODO™) which is sold separa...

Safety NATO Arm (RED® KOMODO™, KOMODO-X) is a NATO standard side mounting arm for the RED KOMODO-X and KOMODO camera with arrays of 1/4”-20 and 3/8...

RED® KOMODO™, KOMODO-X Revolva Riser provides clearance for the Wooden Camera RED® KOMODO™ Top Mount Kits to be utilized with the KipperTie Revolva...

RED® KOMODO™ Accessory Kit (Advanced) is an accessory kit for RED KOMODO-X & KOMODO that includes the LW 15mm Baseplate, Complete Top Mount Kit...

Control Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ CTRL is a Female 4pin 00 connector to a right angle, RED® EXT, 9pin. The connector exits toward...

Micro Battery Plate Adapter V-Mount to V-Mount (RED® V-Raptor™) allows users to attach full-sized V-Mount batteries to their RED V-RAPTOR and RED K...

3pin Fischer Trigger Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a Female 3pin Fischer wired in ARRI standard configuration to a right angle, RE...

Quick Release Bridgeplate (19mm) is an ARRI standard bridgeplate with 19mm rod openings. The new design allows the bridgeplate to drop down and l...

Timecode In/Out Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a female, 5pin to right angle, RED EXT, 9pin. The connector exits toward the operato...

Replacement Upper ARCA Dovetail for the LW15mm Baseplate (RED® KOMODO™) also compatible with KOMODO-X. Includes:(1) 1/4-20 low profile screws(1) 3...

Top Mount Only for RED KOMODO-X & KOMODO is a Top Mount that attaches to the camera body using two captive 3/4" screws and provides a center AR...

Micro Battery Plate Adapter V-Mount to Gold Mount (RED® V-Raptor™), designed specifically for the RED V-RAPTOR and RED KOMODO-X, converts a V-Mount...

Top Handle Only for RED KOMODO-X & KOMODO slides into an ARCA Swiss slot like the one found on Top Mount Only (RED® KOMODO™) which is sold sepa...

Quick Release Bridgeplate (15mm Studio) is an ARRI standard bridgeplate with 15mm studio offset spacing (rods spaced 100mm center to center). The n...

Top Plate Only for RED KOMODO-X & KOMODO slides into an ARCA Swiss slot like the one found on Top Mount Only (RED® KOMODO™) which is sold separ...

Genlock Cable for RED® V-Raptor™, KOMODO-X, KOMODO™ is a female BNC connector to a right angle, RED EXT, 9pin. The connector exits toward the opera...

A-Box (RED® V-Raptor™, KOMODO-X, ARRI ALEXA Mini) adapts one 5 pin connector to two balanced, 3 pin XLRs (female) with the highest quality, profes...

Our line of Bolt-On Accessory Plate Adapters were designed to mount accessories that have M2.5 threaded holes to your build, like the Accessory Pla...

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twis...

Oconnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12”) is a 12 inch ARRI standard dovetail with safety latches on each end. New easy-load safety ...

The Top Cheese Plate securely mounts to the KOMODO® or KOMODO-X™ using two ¼”-20 screws with anti-twist pins and adds seven ¼”-20, anti-twist mount...

Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the...

The ARCA Base Plate was designed for dual 15mm LW rods and allows for maintaining optimal lens height for studio-style builds. This Base Plate come...

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plat...

There are three options in Mount Support for KOMODO-X™ between RF to LPL and RF to PL that are compatible with the ARCA Riser for KOMODO-X. Mount s...

The ARCA Riser incorporates an anti-twist block design built into the bottom of the camera. The Riser was intended for use with the ARCA Baseplate,...

The B-Box enhances the capabilities of the EXT port by offering multiple ports like Run/Stop, timecode, control, and genlock. The B-Box has eight M...

The Ultra Handle 4” Kit comes with the Ultra Handle Upright for RED® DSMC3™, a 4” extension, and a 1” extension. The upright has a 3-pin connector ...

The Side Rail - Left gives users mounting points on the left side of the KOMODO® or KOMODO-X™ as well as Sensor Plane markings. This rail offers fo...

Add ⅜”-16 and ¼”-20 mounting points on the sides of your build by attaching these sleek, lightweight Side Rails. These rails give users the flexibi...