Secure a Teradek Bolt 6 LT Transmitter in this Gold Mount Plus Dual Battery Plate Cradle and allow for pass-through power from the battery to the camera. This cradle has a voltage input range between 17.5 and 29V, with a maximum of 20A. Secure your Bolt 6 LT TX to the bottom of the cradle using an included captive ¼”-20 screw. Also compatible with Bolt 4K LT TX. This cradle requires a 2-pin cable to power the Bolt 6 LT TX/Bolt 4K LT TX. Specifications: Weight: 418 g (0.92 lbs) Dimensions: 74.6 x 81.7 x 119.4 mm (2.94 x 3.22 x 4.7 in)

Meet the 15mm Maxi Rod Light, a product that resulted from a collaboration with a member of our community. This small rod light was designed specifically for cinema-like environments, where using 15mm style rods is standard. The housing is made from aluminum, allowing the user a sturdy place to mount a lens motor or other accessories. It offers 3 different, dimmable lighting options in Red, UV, and White LED, controlled by a joystick for a tactile way to scroll through the settings. This light is powered by a 2-pin locking connector and comes in three sizes, you can choose between 4", 6", or 8". This light was designed to shine a light on your lens without having to maneuver a flashlight or other awkward light source. Additionally, you can attach this light to a monitor like a SmallHD Cine 13 to illuminate your hand unit or other tools. Specifications: 4": Weight: 18.87 g (0.04 lbs)| Dimensions: 99.6 x 14 x 14 mm (3.48 x 0.55 x 0.55") 6": Weight: 28.3 g (0.06 lbs) | Dimensions: 151 x 14 x 14 mm (5.98 x 0.55 x 0.55") 8": Weight: 35.42 g (0.08 lbs) | Dimensions: 202 x 14 x 14 mm (7.96 x 0.55 x 0.55") Warning: To prevent potential eye injury, avoid direct exposure to the light beam. Do not stare into the light source.

Extend your accessories further away from the camera build with this Offset Bracket and prevent unwanted movement with incorporated pins. The receiving ⅜”-16 and ¼”-20 screw mount designs allow for many Universal Accessories like our ¼”-20 Cold Shoe , or Bolt-On Accessory Rail Clamp and Universal Hinge and Clamp to allow for Accessory Plates to be used in conjunction with this offset. These brackets come in four lengths 1in, 1.5in, 2in., and 3in., allowing users to choose the offset bracket that fits the accessory that needs to be mounted. In addition to providing the maximum customization to your rig, our Offset Brackets provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Included Items: 3/16” Hex Key Read the Accessory Plate blog to learn how each part of the system works together. Specifications: 1in (28mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 50 x 21 x 10 mm (1.97 x 0.83 x 0.39 in) 1.5in (38.1mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 32.07 g (.07 lbs) | 58.7 x 21 x 11.5 mm (2.3 x 0.83 x 0.45 in) 2in (50.8mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 34.11 g (.08 lbs) | 71.6 x 21 x 11.5 mm (2.8 x 0.83 x 0.45 in) 3in (76.2mm) Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female): 46.27 g (.1 lbs) | 97.1 x 21 x 11.5 mm (3.8 x 0.83 x 0.45 in)

Organize your workstation with our CS Desk Mat. This unique desk mat works great for sets, carts, or your desktop. This mat includes a light magnetic strip at the top to hold small screws and tools when making adjustments to your build or project, a comfortable area to perform adjustments, and anti-slip material on the back to prevent the mat from moving on solid surfaces. Branded with all the Creative Solutions brands including Wooden Camera, SmallHD, and Teradek, this desk mat will help to keep your gear in place and define your work area. The comfortable cloth material allows you to keep your station scratch-free and allows your mouse to move freely in a large space. Specifications: Weight: 1300 g (2.9 lbs) Dimensions: 813 x 406.4 x 3.5 mm (32 x 16 x 0.14 in)

The NATO Rail (¼”-20) was specifically designed to be a quick solution to mount SmallHD and Teradek accessories to your setup like an Ultra 7 or Bolt 6. Using NATO clamp items like the NATO Lock Ultra Arm , speeds up your build or tear-down time on those quick-moving production days. This rail allows users to install it to their accessory once and forget about it, users do not need to remove this rail to store their accessories. There are 2 sizes available, 50mm and 32mm, allowing users to determine the best length to offset their accessories. Retractable safety pins keep accessories secure, and a ¼”-20 mounting point ensures users can mount these rails to any build. Specifications: 50mm: Weight: 23.5 g (0.05 lbs) | Dimensions: 50 x 21 x 20 mm (2 x 0.8 x 0.8 in) 32mm: Weight: 18.6 g (0.04 lbs) | Dimensions: 32 x 21 x 20 mm (1.3 x 0.8 x 0.8 in)

Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, silicon-molded magnet cable ties that give you an innovative, intuitive way to streamline your cable management, identify your runs, and personalize your setup. Available in 105mm and 175mm lengths with an integrated loop for attachment via a 1/4”-20 camera screw or directly to the cable itself to prevent misplacement. In addition, the silicon is stretchable allowing it to fit over cable connectors making sure they always travel with your cables on or off your setups. Select from 13 colors: yellow, red, green, blue, orange, teal, purple, pink, black, neon blue, neon green, neon orange, and neon pink. Specifications: Cine Mag Ties 105mm/4.1in: Weight: 21.68 g (0.05 lbs) | Dimensions: 105 x 18.1 x 21.5 mm (4.1 x 0.7 x 0.8 in) Cine Mag Ties 175mm/6.8in: Weight: 445.9 g (0.98 lbs) | Dimensions: 175 x 18.1 x 21.5 mm (6.9 x 0.7 x 0.8)

The 1/4”-20 Accessory Cube provides 5 sides of ¼”-20 mounting points for adding accessories to your build and comes in a 1/4"-20 or 3/8"-16 screw attachment. Two detachable locating pins are employed to prevent twisting with two additional pins stored at the top of the cube. The 3/8"-16 screw version has locating pins that are compatible with any ARRI 15mm standard mounting points. The 1/4"-20 screw version has moveable locating pins that are compatible with SmallHD’s (CS) 11.68mm, 3rd party 15mm and ARRI 10.4mm mounting points. Specifications: Weight: 30.5g (0.07 lbs) Dimensions: 25.4 x 25.4 x 25.4 mm (1 x 1 x 1 in)

The Universal 19mm Rod Clamp is a single rod clamp that attaches a 19mm rod to any 1/4"-20 or 3/8"-16 mounting point. Three options in removable bases offer various mounting options with detachable locating pins. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both SmallHD (CS) and ARRI-standard mounting points. Clamps ratcheting thumb screws make tie-down adjustments easy to maneuver. The Universal 19mm Rod Clamp is compatible with Wooden Camera Bolt-On Accessory Rods and Kits for quick and easy accessory attachment. Specifications: Weight: 45.5g (0.1 lbs) Dimensions: 33 x 25 x 70 mm (1.3 x 0.06 x 2.75 in)

The Universal 15mm Rod Clamp is a single rod clamp that attaches a 15mm rod to any 1/4"-20 or 3/8"-16 mounting point. Three options in removable bases offer various mounting options with detachable locating pins. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both SmallHD (CS) and ARRI-standard mounting points. Clamps ratcheting thumb screws make tie-down adjustments easy to maneuver. The Universal 15mm Rod Clamp is compatible with Wooden Camera Bolt-On Accessory Rods and Kits for quick and easy accessory attachment. Specifications: Weight: 44.5g (0.09 lbs) Dimensions: 27 x 10.5 x 70 mm (1.1 x 0.4 x 2.75 in)

The Ultra Handle 5" NATO Kit features a lightweight, durable, non-slip handle with Bocote hardwood inserts for comfort, and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. This Kit adds an array of ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots. The Ultra Handle 5" NATO Kit includes a 5” extension, as well as a 1” Extension, and a Hex Wrench. This Kit also includes a NATO Upright with 6x ⅜”-16 tapped holes with anti-twist pin slots, and 2x ¼”-20 tapped holes. This Universal Upright integrates seamlessly with other Ultra Handle extensions and is compatible with all NATO accessories. Included Items: Ultra Handle Extension Module 1” Ultra Handle NATO Upright Ultra Handle Extension Module 5” 3/16” Hex T Handle Specifications: Weight: 425.02 g (0.94 lbs) Dimensions: 6.96 x 3.1 x 1.3 in (177 x 78 x 32 mm) Overview Video:

Customize your carrying style with any of the modular and ergonomic Ultra Handle Systems or Kits. Each offering features lightweight, durable, non-slip handles with Bocote hardwood inserts for comfort, and two pass-through holes for accessing the mounting bracket with the Hex Wrench while the handle is attached. All handles add an array of ⅜”-16 and ¼”-20 tapped holes with anti-twist pin slots, one ⅜”-16 bolt, and two 3mm location pins. These Ultra Handle Systems and Kits are compatible with Wooden Camera, ARRI, and third-party accessories. The top-tier Ultra Handle System includes two 5” Handles, a Universal Front and Rear Upright, 3” Handle, 1” Extension, Right Angle Extension, as well as 24 color rings (six each in red, blue, green, and yellow) to place between components. The Standard Kit features one 5” Handle, a Universal Front and Rear Upright, 1” extension, and a Hex Wrench. The 5” and 3” Kits include a 5” and 3” extension, respectively, as well as a single Universal Upright, 1” Extension, and a Hex Wrench. Included Items: A00104 | Ultra Handle System (Universal 3/8"-16) 2 x Ultra Handle Extension (5") Ultra Handle Extension (3") Ultra Handle Extension (Right Angle) Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) Ultra Handle Color Rings Pack (6x Red, 6x Blue, 6x Green, 6x Yellow) 3/16" T Handle Hex Wrench Specifications: Weight: 759 g (1.7 lbs) Dimensions: 400 x 50 x 147 mm (15.7 x 1.97 x 5.8 in) A00426 | Ultra Handle Standard Kit (Universal 3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) Ultra Handle Rear Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 474 g (1.04 lbs) Dimensions: 203 x 50 x 70 mm (8 x 2 x 2.8 in) A00338 | Ultra Handle 5" Kit (3/8"-16) Ultra Handle Extension (5") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 376 g (0.8 lbs) Dimensions: 178 x 50 x 70 mm (7 x 2 x 2.8 in) A00337 | Ultra Handle 3" Kit (3/8"-16) Ultra Handle Extension (3") Ultra Handle Extension (1") Ultra Handle Front Upright (3/8"-16 Universal) 3/16" T Handle Hex Wrench Specifications: Weight: 339.5 g (0.75 lbs) Dimensions: 127 x 50 x 70 mm (5 x 2 x 2.8 in)

The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position. Specifications: 214 g (0.5 lbs) | 180 x 110.5 x 16 mm (7.1 x 4.4 x 0.6 in)

The Bolt-On Rosettes give users the ability to mount Rosette Handle Grips anywhere on their build. These rosettes have locking pins to prevent twisting and were designed with tool passthrough for secure mounting. The Bolt-On Rosettes come in either ⅜”-16 and ¼”-20 options. Included Items: 4mm Hex Key Specifications: 25mm Bolt-On Rosette (1/4"-20) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm (1 x 1 x 0.6 in) 25mm Bolt-On Rosette (3/8"-16) : 10.3 g (0.02 lbs) | 25 x 25 x 16 mm ( 1 x 1 x 0.6 in)

Add a new way to stash your timecode sync box or camera port caps in a secure and organized way to your camera builds. This plate includes soft side hook and loop directly incorporated on the plate in addition to a ⅜”-16 or ¼”-20 screws and locating pins to prevent any movement of the plate. The Bolt-On Hook-and-Loop Plate also offers a secure attachment anywhere on your camera build or mounting point. In addition to providing the maximum customization to your rig, our Bolt-On Hook and Loop Plate provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Available sizes for the ⅜”-16 come in mini and small. Available size for the ¼”-20 is a mini plate. Read the Accessory Plate blog to learn how each part of the system works together. Specifications: Bolt-On MIni Hook and Loop Plate (3/8"-16): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm (2.2 x 1.6 x 0.56 in) Bolt-On Small Hook and Loop Plate (3/8"-16): 41.4 g (0.09 lbs) | 105 x 40 x 14 mm (4.1 x 1.6 x 0.56 in) Bolt-On MIni Hook and Loop Plate (1/4"-20): 24.4 g (0.05 lbs) | 57 x 40 x 14 mm

Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount items like your focus MDR or Timecode Box to any camera rig using the variable options in this kit including two plates consisting of ⅜-16 screw mounts with locating pins, and a ¼-20 version. In addition to providing the maximum customization to your rig, our Hook and Loop Plate Kit provides a sleek and unobtrusive design featuring a matte black finish. Each Kit contains 3 Hook and Loop plates in the following increments: 4”x1.5” and 2 versions of 2”x2” plates. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Mini Hook and Loop Plate (3/8"-16) Bolt-On Small Hook and Loop Plate (3/8"-16) Bolt-On Mini Hook and Loop Plate (1/4"-20)

Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Timecode Box, and Wireless Video TX to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Hook and Loop Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each System contains four Hook and Loop plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In)

Customize your Accessory Plate setup by adding a lightweight dual 15mm rod attachment for bolt-on accessories. Compatible with the Bolt-On Accessory Rail Clamp or the Universal Accessory Hinge and Clamp . This rod mount offers the option of securing plates firmly on your camera via dual 15mm lightweight rods in a vertical or horizontal position, whichever works best for your build to keep it neat and organized. In addition to providing the maximum customization to your rig, our Universal Dual Rod Clamp For Bolt-On Accessories provide a sleek and unobtrusive design featuring a black anodized aluminum finish. Read the Accessory Plate blog to learn how each part of the system works together. Specifications: Weight: 65.5 g ( 0.14 lbs) Dimensions: 24 x 113 x 27 mm (0.94 x 4.44 x 1.1 in)

Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR , Accessory Cube , WC Battery Plates, and more to any camera rig using the variable options in this kit including the ⅜-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Full Accessory Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each Full Accessory Kit contains two versions of four plates, a cheese plate as well as a hook and loop plate in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build The threading size for the Accessory rail attachments is M2.5. Read the Accessory Plate blog to learn how each part of the system works together. Included Items: Bolt-On Accessory Rail Clamp Universal Dual Rod Clamp for Bolt-On Accessories Universal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female) 28mm Offset Bracket with Pins ( 3/8"-16 Male x 3/8"-16 Female) Mini Accessory Rail Kit with Safety (100 mm) Mini Accessory Rail Kit with Safety (60 mm) Mini Accessory Rail Kit with Safety (40 mm) Accessory Plate (5 In x 5 In) Accessory Plate (3 In x 5 In) Accessory Plate (2 In x 5 In) Accessory Plate (2 In x 2 In) Hook and Loop Plate (2 In x 2 In) Hook and Loop Plate (2 In x 5 In) Hook and Loop Plate (3 In X 5 In) Hook and Loop Plate (5 In X 5 In)

A Steadicam adaptor plate with 17x ⅜”-16 and 17 ¼”-20 mounting points for fine-tuning balance. Specifications: Weight: 325 g (0.7 lbs) Dimensions: 180 x 109 x 21 mm (7.09 x 4.29 x 0.83 in)

Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for shifting viewing angle. Upper attachment features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. Included 15mm mounting spud allows for upper attachment to be quick released and mounted onto any 15mm rod clamp. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors . Includes: 15mm Mounting Spud Specifications: Weight: 58g (0.1lbs) Dimensions: 27 x 39 x 51 mm (1 x 1 x 0.2 in)

The 3/8"-16 Accessory Cube provides 5 sides of 3/8"-16 mounting points for attaching accessories to any 1/4"-20 or 3/8"-16 mounting point. Two detachable locating pins are utilized to prevent twisting. The 3/8"-16 locating pins are compatible with any ARRI-standard mounting point. The 1/4"-20 locating pins are compatible with both Wooden Camera and ARRI-standard mounting points. Specifications: Weight: 30.5g (0.67 lbs) Dimensions: 25.4 x 25.4 x 25.4 mm (1 x 1 x 1 in)

Available in either 1/4"-20 or 3/8"-16, the Round Bubble Level can be attached to a single mounting point to provide a low-profile spirit level for leveling equipment. Specifications: Round Bubble Level (3/8"-16): 3g (0.007 lbs) 7.5 x 7.5 x 13 mm (0.3 x 0.3 x 0.52 in) Round Bubble Level (1/4"-20): 2g (0.004 lbs) 6.25 x 6.25 x 19 mm (0.25 x 0.25 x 0.25 in)

Available in either 1/4"-20 or 3/8"-16, the Linear Bubble Level can be attached to a single mounting point to provide a portable spirit level for leveling equipment. A single detachable locating pin is utilized to prevent twisting. The 3/8"-16 locating pin is compatible with any ARRI-standard mounting point. The 1/4"-20 locating pin is compatible with both Wooden Camera and ARRI-standard mounting points. Specifications: Weight: 14.6g (0.03 lbs) Dimensions: 34 x 23.3 x 19 mm (1.3 x .92 x 0.75 in)

3/16" T Handle Hex Wrench features a high-quality alloy steel construction. Heat treated for optimum strength and ductility, the 3/16" T Handle Hex Wrench is finished to resist rust. Cushion grip features a vinyl surface for extra comfort. Specifications: Weight: 91g (0.2 lbs) Dimensions: 10.16 x 104.14 x 180.34 mm (0.4 x 4.1 x 7.1 in)

Further customize your rig with Wooden Camera’s Dual Mount Bolt On Rod 15mm (3/8-16). Securely mount remote lens motors , rosettes , handles , and other accessories to your camera rig using the rods’ locating pins that promise stability; never twisting, turning, or coming loose. In addition to bringing security and customization to your rig, our Dual Mount Bolt-On Rods are also sleek and unobtrusive, featuring a matte black finish. The Dual Mount Bolt On Rod can be mounted from one of two axes allowing the rods to extend from either the face or side of a rig - always keeping the rod parallel with the lens mount. Specifications: Dual Mount Bolt On Rod 15mm x 1.5” (3/8-16): 18 g (.04 lbs) | 64 x 20 x 20 mm (2.52 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 3” (3/8-16): 27.2 g (.06 lbs) | 102 x 20 x 20 mm (4.02 x .79 x .79 in) Dual Mount Bolt On Rod 15mm x 5” (3/8-16): 36.3 g (.08 lbs) | 153 x 20 x 20 mm (6.03 x .79 x .79 in)

Zip Box Pro 4x5.65 (Clamp On) is a lightweight and compact, clamp-on mattebox for up to 114mm diameter lenses which can hold three 4x5.65 filters that are loaded from the front and held by a spring loaded latch. The included top flag is made of lightweight carbon fiber and covers the front of the mattebox which is great for protecting the lens between takes. The flag can be removed by loosening the top thumbscrew, aligning the tab with the key slot, and pulling out. Rear opening of this back can be swapped by loosening the 4 thumbscrews and replacing with clamp on backs featuring diameters of 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm. If swing away version is desired, the clamp on back can be replaced with the Zip Box Pro 4x5.65 (Swing Away Back Only) . Available in the Following Diameters: 80mm, 85mm, 87mm, 95mm, 100mm, 104mm,110mm, 114mm Includes: - Mattebox with 3x 4x5.65 filter stages - Clamp On Back - Top flag Specifications: Weight: 225g (0.54 lbs) Dimensions: 196.8 x 50.8 x 165 mm (7.75 x 2 x 6.5 in)

A major update to our popular Shoulder Rig at a lower cost! Now including telescoping arms, additional arm rotation points to widen or narrow grip spacing, a larger and more durable shoulder pad, lighter weight design, and an integrated kickstand for setting the rig down. Quick release shoulder rig based on ARRI standard dovetail and rosettes. Allows for Crossbar to be adjusted left and right on the NATO standard rail by unlocking center thumbscrew and sliding. Threaded holes on Crossbar for attaching monitors, rod clamps, cheese plates, battery mounts, and more. Works great with our NATO Lock Ultra Arm Monitor Mount for quickly moving a monitor from camera to shoulder mounted position. Two shoulder pad options are included to accommodate different shoulder sizes. Available in black rubber or brown leather. Also Available: Shoulder Rig v3 (Base) Specifications: Weight: 1535g (3.4 lbs) Dimensions: 419 x 165 x 108 mm (16.5 x 6.5 x 4.25 in)

Vertical Camera Bracket has 1/4-20 and 3/8-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to tripod plates, camera bodies, ARRI dovetails, and more. Made of durable, CNC machined aluminum, the bracket can accommodate even the heaviest camera packages. Includes: (2) 3/8-16 Unified Bridgeplate Screw (2) 1/4-20 Unified Bridgeplate Screw Specifications: Weight: 1960g (4.11 lbs) Dimensions: 247.7 x 247.8 x 247.7 mm (9.75 x 6 x 9.75 in)

Zip Box Pro 4x5.65 (Complete Kit) is a lightweight and compact, clamp-on mattebox for various diameter lenses which can hold three 4x5.65 filters that are loaded from the front and held by a spring loaded latch. The included top flag is made of lightweight carbon fiber and covers the front of the mattebox which is great for protecting the lens between takes. The flag can be removed by loosening the top thumbscrew, aligning the tab with the key slot, and pulling out. Rear opening can be swapped by loosening the 4 thumbscrews and replacing with included clamp on backs featuring diameters of 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm. If swing away version is desired, the clamp on back can be replaced with the Zip Box Pro 4x5.65 (Swing Away Back Only). Includes: - Mattebox with 3x 4x5.65 filter stages - Clamp On 114mm, 110mm, 104mm, 100mm, 95mm, 87mm, 85mm, 80mm Backs - Top flag Specifications: Weight: 807.4g (1.78 lbs) Dimensions: 228.6 x 76.2 x 203.2 mm (9 x 3 x 8 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Wooden Camera Multi-Tool features an all metal construction and folds up into a compact form that easily fits into a pocket or toolbox. The Multi-Tool contains a flat head screwdriver, #1 phillips head screwdriver, 3/16" hex, 2.5mm hex, 3mm hex, 4mm hex, T10 star key, and T20 star key. Specifications: Weight: 118g (0.26 lbs) Dimensions: 92.3 x 20.3 x 35.6 mm (3.75 x 0.8 x 1.4 in)

WC Pro Gold Mount (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a DC connector compatible with the Blackmagic Pocket Cinema Camera 4K, 6K, 6K G2, and 6K Pro. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . Cable length: 16 inches (406.4mm) Specifications: Weight: 187g (0.4 lbs) Dimensions: 142.6 x 92.1 x 21.9 mm (5.6 x 3.6 x 0.9 in) Custom lengths up to 6ft available at the same price. Send us an email with your requirements: info@woodencamera.com Pro Power Plates Overview:

WC Pro V-Mount (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a DC connector compatible with the Blackmagic Pocket Cinema Camera 4K, 6K, 6K G2, and 6K Pro. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW) , Rod Clamp (15mm Studio) , and Rod Clamp (19mm) . Cable length: 16 inches (406.4mm) Specifications: Weight: 187g (0.4 lbs) Dimensions: 142.6 x 92.1 x 21.9 mm (5.6 x 3.6 x 0.9 in) Custom lengths up to 6ft available at the same price. Send us an email with your requirements: info@woodencamera.com Pro Power Plates Overview:

Power Extension for Blackmagic Pocket Cinema Camera 4K / 6K / 6K Pro / 6K Pro G2 (Straight, 36") is a power cable that extends any Blackmagic Pocket Cinema Camera 4K / 6K battery plate or AC adapter by 36 inches (0.91 meters). Specifications: Weight: 63g (0.09 lbs) Dimensions: 973 x 9.7 x 9.7 mm (38.3 x 0.38 x 0.38 in)

D-Tap to Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro (20") allows you to power the BMPCC4K or BMPCC6K using any V-Mount or Gold Mount battery with a D-Tap plug. Cable length: 20 inches (508mm) Specifications: Weight: 22.7g (0.05 lbs) Dimensions: 559 x 25.8 x 11.6 mm (22 x 1.0 x 0.5 in)

The NATO ARRI 70mm Rail (1.67" Screw Channel) is a NATO standard, 70mm long, quick release rail that attaches to any two 1/4-20 holes, up to 1.67 inches or 42.5mm apart center to center. The NATO ARRI Rail is a new version of our popular Safety NATO Rail which has a safety pin on one end and an ARRI accessory mount on the other which is great for adding our Microphone Shock Mount , Universal Offset Bracket , or other ARRI accessory devices. Great for attaching our new NATO Handle Plus v2 , RED®, and third-party NATO accessories. Includes: (2) 1/4-20 x 3/8" screws Specifications: Weight: 36g (0.08 lbs) Dimensions: 82.6 x 20.5 x 16.4 mm (3.25 x 0.8 x 0.6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to 1/3 lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Touch and Go System is compatible with: -120mm O'Connor Euro -Sachtler 35 -Ronford Baker RBQ Specifications Complete System: Weight: 510g (1.12 lbs) Dimensions: 184.2 x 91.44 x 25.4 mm (7.25 x 3.6 x 1 in) Touch and Go Plate Only: Weight: 118g (0.26 lbs) Dimensions: 114.3 x 77.47 x 6.6 mm (4.5 x 3.05 x .26 in) Touch and Go Receiver Only: Weight: 390g (0.85 lbs) Dimensions: 184.2 x 91.44 x 19.05 mm (7.25 x 3.6 x .75 in) Touch and Go System Overview: NAB 2018 New Products Overview:

Wireless Side Plate Adapter (URSA Mini, URSA Mini Pro / 12K) attaches over the right rear side panel to provide mounting points for the Universal Wireless Side Plate (sold separately). Also compatible with many third parts wireless side plates that utilize #6-32 screws in Anton Bauer's standard spacing. Markings for HD-SDI, Power, etc. are still visible on camera. Includes: (2) M3 x 12mm socket cap screws Specifications: Weight: 45.3 g (0.1 lbs) Dimensions: 25.4 x 50.8 x 25.4 mm ( 1 x 2 x 1 in) URSA Mini Side Plates:

Unified Baseplate Camera Dovetail (Sony FX6, Rialto, URSA Mini, Mini Pro, Mini Pro 12K) is a plate which can attach to the base of those cameras and when combined with the Unified Baseplate Core Unit (No Dovetails) , provides 15mm lightweight rods at the correct lens height. The slotted design allows multiple included 1/4-20 and 3/8-16 screws to be attached to the camera bottom up to 70mm apart center to center and non-slip, rubber surface prevents the camera from twisting. The bottom portion of this Unified Camera Dovetail features an ARCA Swiss standard dovetail shape, our patented serrated dovetail design, and 1/4-20 threaded holes for attaching to gimbal mounts and other devices. Additionally the 15mm vertical rod opening can be combined with our Unified Lens Adapter Support Kit components to attach adapters like Wooden Camera, Metabones, etc. securely onto a camera body. Included: (2) 1/4-20 low profile screws (2) 3/8-16 low profile screws Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 152.4 x 76.2 x 25.4 mm (6 x 3 x 1 in) Unified Baseplate Overview:

Unified Baseplate (Sony FX6, Rialto, URSA Mini, Mini Pro, Mini Pro 12K) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. The bottom of the baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) . To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails , Safety Dovetails , or Shoulder Rigs . For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate , providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head. Additional Unified Lower Quick Dovetails can be puchased to mount to gimbals, jibs, cranes, etc, making for quick and repeatable camera transitions. ** The Unified Baseplate is backwards compatible with our original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large) ** Includes: (2) 1/4-20 low profile screw (2) 3/8-16 low profile screw Specifications: Weight: 362.8 g (0.8 lbs) Dimensions: 50.8 x 152.4 x 152.4 mm ( 2 x 6 x 6 in) Unified Baseplate Overview:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Top Plate (URSA Mini, URSA Mini Pro / 12K) is a top mounting cheese plate for Blackmagic URSA Mini and URSA Mini Pro / 12K cameras. Attaches to camera top by (4) 1/4-20 screws. Arrays of 1/4-20 holes in standard 9mm spacing and multiple 3/8-16 holes for large accessories. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent). Includes tape hook for accurate focus measuring. Original Blackmagic handle can be reinstalled on the Top Plate using center 1/4-20 threaded holes. Includes: (4) 1/4-20 socket cap screws Specifications: Weight: 181.4 g (.5 lbs) Dimensions: 12.7 x 127 x 152.4 mm (0.5 x 5 x 6 in) Camera Configuration Guides: Blackmagic URSA Mini Camera Accessory Kit (Pro)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. D-Box power pigtail cable replacement. Adapts mini 4pin XLR (female) to standard 4pin XLR (male). Cable length is 8 inches (20.3 cm). Wiring also compatible with TV Logic monitors and Alphatron EVF. Heavy gauge wires can withstand more than 10A at 14.4V. Specifications: Weight: 90.7 g (0.2 lbs) Dimensions: 25.4 x 127 x 152.4 mm (1 x 5 x 6 in)

IN STOCK Complete purchase by 3pm CST and order will ship same business day. NATO Lock Kit is a quick release set based on a NATO standard rail. The rail portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting. The rail is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. The clamp portion of the kit can also bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into. Compatible with RED® Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products. Specifications: Weight: 50g (0.1 lbs) Dimensions: 47.2 x 47.2 x 18.3 mm (1.9 x 1.9 x 0.7 in)

Universal Lens Support (15mm LW) supports heavy lenses when using 15mm lightweight rods. Includes 1/4-20 cap for attaching to tripod collars and some cinema lenses, 3/8-16 for attaching to most cinema lenses with standard support foot, and rolling Y bracket for attaching to DSLR type lenses where no support foot is available. Rubber wheels also allow for positioning under rotating focus barrels when necessary. Quick, snap on installation possible by loosening thumbscrews. Vertical post can move laterally to accommodate skewed baseplates. Height adjustment meets any diameter lens barrel. Specifications: Weight: 156g (0.3 lbs) Dimensions: 102.7 x 38.9 x 66.1 mm (4.0 x 1.5 x 2.6 in) Demonstration Video: NAB Coverage: Rod Standards Tutorial:

IN STOCK Complete purchase by 3pm CST and order will ship same business day. Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes: Rosette Bracket 2x Rosette Handle (Brown Leather) 2x Rosette Arm Specifications: Weight: 1081g (2.4 lbs) Dimensions: 152.40 x 101.60 x 279.40 mm (6.0 x 4.0 x 11.0 in)